I am getting message iTunes.exe - Entry Point not found
I have search for the QTCF.dll file and I can only fine it in: C:\Program Files\QuickTime\QTSystem
Do I need to remove this file for it to work?
What's the precise text of your "entry point" message please, olivia? (That mitght give us additional clues as to what's going on, with any luck.)
Similar Messages
-
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found
After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Then another error message tells me: iTunes not installed correctly. Please reinstall. Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message. Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Just installed LV 5.1 on customers PC. She already has LV 6.1, and 7.1 installed. Upon reboot, at login screen, the error message below occurs:
"nimax.exe-entry point not found"
"The procedure entry point?GetVirtualChannelObjectOnServer@CNIConfigData@@QAEKPBD0@Z could not be located in the dynamic link library nidaqcfg.dll."
I have tried installing the latest version of MAX. No luck. Any help would be appreciated.
Mark
Attachments:
Ann's.doc 30 KBHi Marxs,
My first suggestion would be to avoid installing LabVIEW 5.1 if possible. This for a few reasons...
LabVIEW 5.1 has the option to install DAQ with LabVIEW. If you elected to install NI-DAQ with the LV 5.1 install, you will run into driver conflict problems.
If you want to use DAQms with LabVIEW 7.1, you will need to install NI-DAQ 7.1, 7.2 or 7.3. You can also use NI-DAQ 7.3 with LabVIEW 6.1. However, NI-DAQ 7.3 will NOT install support for LabVIEW 5.1. This means that you will not be able to use your DAQ devices in LV 5.1.
If you need DAQ for LV 5.1, you will need to go back to NI-DAQ 6.9.3. This version will work with 5.1 and 6.1, but you will loose functionality in LabVIEW 7.1.
My suggestions would be as follows:
-- uninstall LabVIEW 5.1 and all versions of DAQ that are on the machine
-- re-install LabVIEW 5.1 but choose the "custom" and elect NOT to install DAQ
-- Install NI-DAQ 7.3 and have support for 7.1 and 6.1 (no support for 5.1 is available)
Basically, when you try to mix these very old versions of LabVIEW and DAQ with the newer stuff you will run into driver conflicts that can be unpredictable. -
When I click on itunes on my laptap, i get promted with "the procedure entry point AVCFPlayer Applies Media Selection Criteria Automatically Key could not be located in the dynamic link library AV FoundationCF.dll?
How can I correct this please. I have not been able to go to iTunes?Try the following user tip with that one:
Troubleshooting issues with iTunes for Windows updates -
HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes
Hi, whenever I try to open iTunes I also get this message:
iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
Thanks.*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there. -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
TS3212 iTunes.exe - Entry Point Not Found
Canot open iTunes after downloading recent updates: Here's the text of the error message:
iTunes.exe - Entry Point Not Found
4 The procedure entry point
?videoTracks@QTMovie@©QBE?AV?SVectcr©V?SRefPtr©VQTTracL©
@@***©@SOA@VCrashOnOverflow@2@©***@©XZ could not be
located in the dynamic link library C:\Program Files (xSó)\Common
Files\Apple\Apple Application Support\WebKit.dll.
OKI continued to search the forums and came across this one:
https://discussions.apple.com/message/24606602#24606602
I want to give credit to naminegalgbigglesfor solving this one for me. Here is the solution that he posted:
Copy QTMovieWin.dll from
c:\Program Files (x86) \Common Files\Apple\Apple Application Support
and paste into
c:\Program Files (x86) \ iTunes
I believe that I recall having problems with this dll each time I have upgraded iTunes, so I'll be sure to check this particular one next time too. -
I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?
I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will. -
when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.) -
Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.
Copying & pasting SQLIte3.dll worked out well for your computer?
Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.
Maybe you are looking for
-
Can't print even or odd numbered pages
No matter I choose "even numbered page" or "odd numbered page" in the printer setting, it just print out all pages without differences. I tried two different printer, hp Laserjet 1300 & Epson stylus C68, and got the same result. However, printing eve
-
Import NULL GUID - SSIS Help needed
Hi Everyone, I am a newbie here. I am trying to import data from flat file to SQL DB using SSIS. I have GUID data which i am importing into uniqueidentifier field. My flow is as "Source File" -> Derived Column (Convert to GUID) -> Data Conversion ->
-
Online number in Brazil not working
For weeks my friends have been reporting it was working intermitently. Now none of them can place a call, they always get a busy signal. I have a friend who has an online number and he's reporting the same problem.
-
How and why to use Version management in DMS. Is there any configuration required for it?. Thanks in advance
-
Hi all, We have a substitution at callup point 3 for AP invoices. The 'Vendor number' from the Vendor Line item is substituted in the GL Line Item. This substitution works fine in manual/online invoice postings (FV60/FB60). When we use ZOption which