I am getting the msg "data corrupted" from windows installer, attempting to install photoshop elements 12
I am getting the msg "data corrupted" from windows installer, attempting to install photoshop elements 12. have wiped drive of file and redownloaded but get same results. have run regedit and removed Photoshop elements 12 also with no luck. Went back and installed photoshop elements 10 and prerimer and installed good, I have also installed prerimer elements 12 and the install was ok. I also ran trial version of photoshop 13 without any issues. I am at a lost to what is causing this issue. Any suggestions please.
You can download the trial version of the software thru the page linked below and sidestep the download assistant.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Similar Messages
-
When installing CS3 Design Premium it instals Version Cue server and shared components, but I get the message "Errors: 6 component (s)" and dose not install, Photoshop, Flash, Illustrator, Indesign or Creative Suite Premium
Thank you Bturko in the future only migrate/copy/transfer your documents and settings. Adobe applications especially are not designed to be transferred from one computer to another. It is possible to recover however. I would recommend the following steps:
Run the uninstaller located in Applications/Utilities/Adobe Installers
Run the CC Cleaner Tool to ensure complete removal - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files they can be downloaded at Download CS3 products.
Run the installer and reinstall Creative Suite 3. -
I keep getting a shared technology error attempting to install Photoshop elements 12
I keep getting a shared technology error attempting to install Photoshop elements 12
Gdivad please see the following related discussions to this topic:
http://forums.adobe.com/message/5789050#5789050
http://forums.adobe.com/message/5901447#5901447 -
Change plattform from windows to mac teacher edition photoshop elements/premier elements
Hi!
I want just want to change plattform, Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 Student and Teacher Edition (Windows,Svenska).
I´ve ordered Windows but i want the macversion.
Does anybody know why the adobe support takes soon long time to fix this small thing. I haven't downloaded the program.
Is this normal ??? Has anyone else experienced the same thing?Hi!
No, i haven't downloaded it yet!
/P
Skickat från min iPhone
24 nov 2014 kl. 23:15 skrev Jeff A Wright <[email protected]>:
Change plattform from windows to mac teacher edition photoshop elements/premier elements
created by Jeff A Wright in Student and Teacher Edition Information - View the full discussion
Svea support the license for Photoshop and Premiere Elements 13 is a multi platform license. Have you downloaded the installation files and ran the installation with the serial number you received?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6959167#6959167 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6959167#6959167
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Student and Teacher Edition Information by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How to get the last data point from a TDM file in LabVIEW?
Hello,
I am using LabVIEW to analyze some rather large TDM files, and I need a way to get only the last data point. So far, the only way I have been able to accomplish this is by reading the entire file. Is there a property in the TDM file or a function in LabVIEW that will allow me to get the index of the last item in a channel?
Thanks!
ChristinaDo you want to avoid reading whole file and want to be able to reach or get the index of last value of channel? is there any specific reason? I am not sure you could do it without loading the whole file. But the easiest way would be just to use array functions "array size" would give you the index of last element.
-Nilesh
Kudos are (always) welcome for the good post. :-) -
Here is a copy of the windows vista error report.
Product
iTunes
Problem
Stopped working
Date
4/19/2014 9:38 PM
Status
Report Sent
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.5.5
Application Timestamp: 53073d6a
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062086
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 8d13
Additional Information 2: cdca9b1d21d12b77d84f02df48e34311
Additional Information 3: 8d13
Additional Information 4: cdca9b1d21d12b77d84f02df48e34311
Extra information about the problem
Bucket ID: 95851104
I would appreciate any suggestions or ideas of where else to look for advice. Thanks!Hey jcaqualung,
Thanks for the question. I understand that you are experiencing issues with iTunes on your Windows Vista machine. The following resource may provide a solution. I would also recommend installing iTunes on the internal hard drive of your computer, as opposed to the external drive.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
Here is the exact error message:
The upgrade patch cannot be installed by the Windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.
It is Acrobat 9 Pro that is installed and the upgrade file is: AcroProExUpd910_all_incr and/or AcrobatUpd911_all_incr.
Help!the 2nd file can only be installed on acrobat 9.1.0 pro extended.
what version do you have (click help>about)?
and what link did you use to get AcroProExUpd910_all_incr? -
Is there a way to fix photoshop elements 11 from being pixelated on my new Macbook Pro Retina Display?
You may want to reference http://forums.adobe.com
The problem is mentioned here: http://forums.adobe.com/message/5647016#5647016#5647016 -
How to get the CSV,DATA output from RTF template
Hi Jorge
Thanks for your help.
as in the link you have given RTF template can have the output type CSV,DATA but in the preview i can see only html,powerpoint,pdf,html excel .
How to see the output in SCV,DATA format using my RTF template do i need to do specific design for those outputs.
Thnaks in AdvanceIt is because it has been preconfigured with such outputs.
To modify and add more output types simply go to:
1. Edit your Report
2. Click on "View a List" (upper right hand corner)
3. Click on the "output formats" (corresponding to your layout) and
4. Check (add) the additional output formats you want your report to have.
cheers
Jorge -
"Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each time I try to open it.
It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.
-
After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.
Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again. -
I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying
The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Not able to get the Qualification data from BAPI
Hi all,
I am using a BAPI (BAPI_JOBREQUIRE_GETLIST) to get the qualifiaction data for requirement profile. It's working fine earlier but I did not get the qualification data from this BAPI, although the data is there in DB against this requirement profile.
Can someone suggest me why I am getting this issue. I have looked into SDN and in BAPI documentation and found as below:
"You require authorization (structural authorization) to read the Requirements subprofile."
I am having the same User ID as I had before (when I getting back the correct data), so I don't think it should be authorization issue.
Can someone help me out in this issue please.
Thanks,
Sanket SethiHi Shiva,
It does not going to these includes at all. Message comes out with successfully done. The BApi is calling RHPP_COMMON_QUALI_READ inside, but this will not return any data. But if will call any qualification object ID, this BAPI will come up with data.
So the QP type LO profile will not come up with any kind of data, but if we pass the OTYPE as Q and pass any Qualification object ID then the data will be returned.
Is there any relationship or some other thing is missing? Any idea.
Thanks,
Sanket Sethi -
How can I get the image data from Clipboard with LV
Anybody knows How can get the image data after pressd "print screen button" with LV?
I want to program a software which can save a image as a bmp or jpeg etc, and the image data is from pressed print screen button.
How to get it out from clipboard. I am trapping about. thanks in advance.
Try to make everything AutomaticYou can have a look at Rolf Kalbermatter's post here (give him stars) or, if you're using scripting, you can use the Application class Get Clipboard Image method.
Try to take over the world! -
How to Get the Current data into Planning Layout from the Planning cube
Hi,
I have a problem in BPS. I am selecting the data from cube based on Month org details but I want to see the latest data. How can i get this data into planning cube.
Like
data
Tran cal month org amt
1 jan a 100
1 feb a 200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran cal month org amt
1 feb a 200
Kindly help me in this regard
Thanks
NaveenNaveen,
Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini
Maybe you are looking for
-
Pricing, Modifiers in Sales Order Form
Hi Gurus, Please help me to resolve the issue with Pricing, Modifier to Sales Order: I have created Master price List for Item A - $40 Modifer 1 - Dealer Discount Price is 20% (Created Modifier as Dealer Discount - 20%) Modifer 2 - Order Header disco
-
Path Selection issue in Table Test
Hi All I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path.. Can any one suggest why the Path is not selecting ...? Appreciate your feed back. Regards, Sairam
-
I bought a used iphone5, I got it activated but my carrier won't let me have the phone until I get the password from the previous owner but the passwords we were given don't work. Is there a way I could switch icloud user to my account without their
-
Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.
-
Can't Update Illustrator CS3 13.0.0
I am trying to up date I-CS3 and I keep getting an error message. It says it can't up date and I should reinstall the program. I reinstalled it twice, almost an hour of disk swapping, and I am still getting a message that it won't up date. Cheers!