I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.
I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R
Similar Messages
-
I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I Keep getting this error message after installing elements 7
I Keep getting this error message,-Photoshop Elements Help could not be found. Please re-install Photoshop Elements to fix this problem.
Moving this discussion to the Photoshop Elements forum.
Philipk91962784 what operating system are you installing Photoshop Elements on? -
Getting this error message after installing and clicking getting started
I have been getting this error message when i click the Getting Started option for oracle
"Windows cannot find 'http://127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again."
any ideas on what to do about this?Obvious thing to do is to correct Get_Started url shortcut.
If you had searched the forum, you'd found previous threads and solutions to go, e.g.:
{thread:id=2279339}
{thread:id=2277895} -
I am trying to download iTunes, it gets so far and then I get an error message that says that an old Bonjour cannot be removed, it goes on a bit further and says and old Apple Software Update cannot be removed; and then it says that the installation was interrupted and to try again.
I have gone to the control panel and tried to remove all traces of Bonjour, Apple, Quicktime but the two will not be removed it says that their .msi file and missing and to try to find them. I have even reinstalled the programs from the ProgramData files in an attempt to repair or replace the missing files but I still get the same answer.
Can anyone help me? I need iTunes up and running to sync with my phones.
Thank you for your help,
BarbaraHi Barbara,
I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7, who like myself was a newbie on this platform, b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
Regards
John -
Error message: icloud unable to access my account... I changed my password, this is the message on my ipad. gives me two options: ignore/settings... ipad not responding to either... ?
Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
pls help
Hello koolaide77,
The article linked below provides some useful troubleshooting steps and information that can help resolve this error.
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866
Cheers,
Allen -
I keep on getting this error message on my Yahoo mail all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade are blocked
I have latest version of FireFox 19 and Snow Leopard. I get the same error message on Safari and Google Crome aI even downloaded another Browser for Mac still got he same error message ! I have used the Disk Utility to repair files and rest Safari. I have deleted Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nuts.You can check for problems caused by a possibly corrupted user agent.
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
I get this error message every time I open iTunes. "iTunes.exe has been set to run in compatibility mode for an older Version of Windows" It's the first thing that comes up. Although it doesn't affect the application from starting...it's really annoying. I've checked the compatibility mode and it's set off and it's current. When I have my computer check it on it's own it resets it and then I can't open iTunes at all. Any computer genius out there know why this is happening and how to fix it? I've also have installed iTunes about 100 times hoping it would fix the problem but it doesn't.
Although it doesn't affect the application from starting...it's really annoying. I've checked the compatibility mode and it's set off and it's current.
Doublechecking ... are any of the boxes in the Compatibility mode tab for iTunes checked at the moment? If so, uncheck them all and see if iTunes will start properly again.
If the iTunes compatibility tab has no checked boxes whatsoever, also check to make sure that your QuickTimePlayer.exe compatibility tab has no checked boxes whatsoever.
If nothing is checked for either iTunes or QuickTime, you may be having trouble with an errant registry entry.
If so, RandomBehavior's post may be of some assistance:
http://discussions.apple.com/message.jspa?messageID=10397771#10397771 -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie -
I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.
The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.
-
I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
please help!
imac specs:
IMAC 24 inch Mid 2007
Intel 2.4 GHz 2 duo
4GB SDRAM
OS X lion 10.7.4
200 GB Harddrive space freeTell us more about the disk and partition onto which you are trying to install Mountain Lion:
Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
How is the disk (top level container) formatted according to Disk Utility:
* What Partiton Map Scheme? (Should be "GUID Partition Table".)
* How many partitions? (Should be 1 unless you have a Boot Camp partition.)
How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
Message was edited by: markwmsn
(image inserted) -
I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?
I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Maybe you are looking for
-
How to reverse the clearing doc
Hi Experts, i done sample invoice for vendor and customer, this inter co payment transaction i cleared as well with f110. But this is not a original invoice so that i want to do reverse vendor and customer invoice If i am giving any doc no (cust invo
-
Package not found error...please help!!!!
I am trying build an application using Apache Http server and tomcat. I have created a package called 'employee' under web-inf/classes. I have also put my servlet under web-inf/classes. In my servlet if I use the statement 'import emplyee.*' it gives
-
Basic problem (annoying, if not disasterous - but common - at least for me): When you are trying to sktick two different VIs together and you copy the block diagram of one to the other, it sticks all the controls in the middle of nowhere. THen you h
-
Error while doing Enhanced Receiver Determination
Hi, My scenario is Fiel->XI->File with enhaced receiver determination that is i should get the receivers dynamically at runtime. I gave Operation mapping in Receiver determination and created all other objects. Even if i check message mapping i am ge
-
good day !!! I am trying to create a new presentation in keynote, when selected sends me the following message: An error occurred while communicating with the server, try again later. I tried for several days to make the presentation but I keep sendi