I am getting this iCloud error message at pc startup:  The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup:  The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

Similar Messages

  • Received error message "the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch ICloud.  Any suggections?

    received error message  - the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch iCloud.  Any suggections?

    I had roughly the same error. I fixed it by running the iCloud control panel update from apple software update. The problem cropped up after I ran the most recent iTunes update, I've personally been having issues with iTunes updates being finicky since upgrading to Windows 8.1, I've had to download installers rather than running the update directly through Software Update, so it's possible Apple is not fully addressing compatibility issues for newer versions of Windows. Ultimately it seems to be a missing file issue, so any update, installer, or install verification/repair that directly addresses the iCloud files should see and replace the missing file.
    Also it looks like Apple is either unaware of this problem or not addressing it at all, there are about a dozen support requests from within the last month all asking this same question regarding iCloud, just with different specific files unable to be found. None of them have answers.
    Hopefully this works for you

  • I tried to uninstall itunes and appropriate apple products on my computer.  It will not let me uninstall message I keep getting is"THE PROCEDURE ENTRY POINT_OBJC_INIT_IMAGE COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY OBJ.DLL.  CAN ANYONE HELP?

    I tried to update Itunes on my desktop computer and for some reason it did not work properly.  I am receiving the following message:
    "the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll.  can you help?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • When I boot my computer i get a message that says The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll.

    When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!

    You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
    The detailed file properties should be as shown.
    If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
    Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
    Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
    tt2

  • HT1349 my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and

    my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them?  will this delete everythin in the itunes account?  please help

    This might help https://discussions.apple.com/thread/5821701

  • When I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP

    when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
    == This happened ==
    Every time Firefox opened
    == start mozila firefox

    This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
    The file dwmapi.dll is a Vista file and should not be present in Windows XP.
    See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674]

  • "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?

    I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
    "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
    Anyone have a solution?

    This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Apple Application Support
         C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
    tt2

  • Keep having this error: The procedure entry point_objc_image could not be located in the dynamic link librrary objc.dll.

    itunes sync is not working on a new device, tried to update to itunes 11.1 but this error keeps showing up now, and when I connect the ipod  it says "itunes requires a newer version of the Mobile Device Support.

    To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
    To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • I updated Firefox, restarted and now I get the following error message when I try to reopen Firefox. "The procedure entry sqlite3_stmt_readonly could not be located in the dynamic link library mozsqlite3.dll".

    I just updated Firefox and restarted.

    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

    When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

    first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

  • Firedox did a restart, now it wont open i get the message The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library

    firefox did a restart now it wont open, i get the following message,
    The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library
    have tried system restore but this didnt help

    Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After Installing Itunes, it will not open and I receive this error, "The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll"

    Please help, cannot open itunes after uninstalling and reinstalling multiple times. Each time I receive the error message, "
    The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll

    Does anyone have any suggestions?  I restarted my PC and even tried to repair through the contol panel Uninsta; program.  HELP!!!

  • Error Msg: Apple Syncnotifier.exe - The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Anybody out there have a solution to the following error msg.  I have already unistalled and reinstalled itunes with no luck.
    Please advise.
    Apple Syncnotifier.exe - The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Copy file "SQLite3.dll" from this location using Windows Explorer:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    Paste this file to this location
    C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Restart your computer, the message should disappear..

  • Error message in iDVD '08 - A valid DVD drive could not be found

    I did the basic updates that always pop up and this error appeared the same day when I went to go use my dvd player (that I use on a daily basis and never had a problem with till now); "A valid DVD drive could not be found. I'm running on an iMac 10.4.11. The dvd player no longer works after I did the update in the morning. Does anyone know how to fix this problem?

    Not clear whether you are talking about the Superdrive or the DVD Player application, but either way, this has nothing to do with iDVD!
    When you updated (and you don't say which updates) did you repair permissions both before and after?
    Repairing permissions is important, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two in Tiger, but much longer in Leopard.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    An article on troubleshooting Permissions can be found here:
    http://support.apple.com/kb/HT2963
    By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
    http://support.apple.com/kb/TS1448?viewlocale=en_US
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417?viewlocale=en_US
    I would suggest you do so now, then restart your mac.

  • Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

    I am currently taking the course "C# Fundamentals" from Bob Tabors site:  LearnVisualStudio.NET .  I'm on day 8 where we are integrating SQL Server with C#.  In Lesson 6 and 7, (havent' gotten past these two) I am having an
    issue.  In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title.  I cannot get the db to appear in the Solution
    Explorer, or open up so I can create a table.  When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program.  Even
    though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
    exactly what I need to do.  Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job.  Any help would be appreciated. 
    JennyBarrett7

    Hi
    According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
    Change Data Source dialog. If not, you need to install
    SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
    Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
    http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
    However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, you can review the following link:
    Working with SQL Server Compact in Visual Studio:http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
    Thanks
    Lydia Zhang

Maybe you are looking for

  • Best way to manage 2 iPods on one computer

    I know there are similar threads, but I didn't see my specific question answered, so here goes. I have an iMac that my wife and I share using separate user accounts (trust me, it's better that way). I already have an iPod nano that I use on my accoun

  • Connecting a HP LaserJet 4P

    I have purchased a time capsule (500GB) serial number 6F8293CVYZV and I have an older HP LaserJet 4P serial number USCB012140. Could anyone tell me if I purchase a printer cable (USB to serial or parallel) will it work with the time capsule and HP La

  • HELP! File already open for writing?

    I've got a file that has been Stuffed (using Stuffit) and now I'm trying to unstuff it and/or open it but get the "File is already open with write permission (-49)" error with an "OK". When I click OK, it stops doing what it was doing. But this file

  • Report Painter: FAGLFLEXT, profit-center authorization not checked

    Hi colleagues, I am using a Z*-library in report painter based on FAGLFLEXT. When a report beads on this library is executed, there is no authorization check for profit-center (profit-center groups,-). Wether auth. Object K_PCA is checked nor an entr

  • Address Book "Groups" and "Smart Groups" don't appear on iPod Touch

    In Address Book I have some 200 contacts (cards) and I've started making groups manually and also using Smart Groups. The contacts are all there-- WELL WAIT-- I'm not there! ME-- My contact card is not listed in iPod! ALSO: none of my GROUPS or SMART