I am having a DNS problem with my computer. My laptop connects to the internet and my skype works normally but when i try to surf the web it says "DNS Look up failed".
MY PROBLEM
I am having a DNS problem with my laptop. It connects normally to th e wifi internet but when i try to surf the net it says "DNS Look up failed"
This problem only occurs when with the internet at my house. whenever i connect elsewhere my computer works normally. My ipod, iphone, tablet and other friends computers work normally when they are connected to my internet. i use dmy neigbours nework a couple of times from my house and it wrks normally.
Also when i turn my laptop on or off i can browse for a few minutes or seconds before it fails again. My skype works like there is no problem
WHAT I HAVE TRIED TO RESOLVE IT
I have tried changing the DNS, i used open DNS and google free DNS and it still didnt make a difference.
I have rebooted router many times, nothing
I have changed my home router, nothing
I backed up my computer, resored everything it to factory setting and put everything back on; still nothing
Run a diagnostics at 'Best buy' and they say nothing is wrong; but i know there is something wrong with the DNS
I have tried different "sudo" type of codes on my comupter from stuff i got online and nothign has proved fruitful yet.
i tried using safari, Google chrome and firefox, all not loading
WHAT DO I DO TO FIX THIS?
You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
Similar Messages
-
In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?
Have you turned the iPad off then back on? That often helps with problems.
-
When I plug a LaCie external hard drive to work with Time Machine into my new Mac mini, [OS 10.9.1] it drastically effects the performance of the internet and email, turn off Time Machine, unplug the hard drive, internet and email go back to normal. Why?
Maybe:
http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference -
I connect my i-pad mini to my wireless router and it says im connected but it wont let me do anything anybody know why ?
You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
for a week i am expecting from apple to solve or comment or give a solution but guess like my iphone, apple also become dummy, guess apple is going to loose brand
I had the prob all good now follow the. Initial response of the fix i removed all network setting for wifi close the phone and redone them sll good now for 6.01 since then on all upgrage im golden. Just check fix at start on issue
-
I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.
Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.
-
I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??
Perhaps something in this support article will help:
http://support.apple.com/kb/TS2755
Regards. -
While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv
Dear Brian:
Create a Play List in iTunes.
Control-Click and open "Export" in the highlighted Playlist in iTunes.
With "Export" opened:
1. Click on "Format" and choose "M3U";
2. In "Save As" name your "WhatEverNamePlaylist.m3u"; and
3. In "Where" tell the program where to send your "WhatEverNamePlaylist.m3u".
You are done creating the Playlist.m3u in iTunes.
Open "Subsonic Web Page".
Left hand column open "Import playlist".
In "Import playlist" click "Choose File" and open the "WhatEverNamePlaylist.m3u"; you created in iTunes.
The "WhatEverNamePlaylist.m3u" should now occupy the space between "Choose File" and "OK".
Click "OK".
The file should now be in the "Playlist" on the left. -
I am having trouble uploading anAperture photographic book to Apple. The first time I tried “Buy Book” theorder proceeded normally but when it came to uploading the book to Apple it"uploaded" for six hours without going through so I aborted theattempt and cancelled the order.
The second time I tried the samething happened so after nine hours I found that the "Quit Aperture"button had greyed out so I had to Force Quit. I do not know if the order wascancelled but I do not think that the upload was successful.
What can I do about this problem?I also am not able to print a book. I have Aperture on two Mac, MacBook Pro (current) and a MacPro - both printed books prior to update 3.1.3 now all I get is the spinning ball then I have to Force Quit. I tried books I have ordered in the past (trying to print a new book) and they also failed. This is not a picture problem but a problem with 3.1.3 update. I would like to print some more books and give Apple some money but can't.
Any suggestions?
Ken -
I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
== Issue
==
I have another kind of problem with Firefox
== Description
==
I have just downloaded firefox but when I try to access the internet it comes up with the message "firefox could not download the search plugin from: http://toolbar.inbox.com?search_plugin_firefosx.aspx.tbid=801398language=en" Can you help please
== User Agent
==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; FunWebProducts; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 1.1.4322)Uninstall the Inbox Toolbar, following steps here:
http://toolbar.inbox.com/faq.aspx?faqid=2876&faqmod=WST_Install#1
Then retry opening Firefox.
You can also try opening Firefox in [[Safe Mode]] (use Continue in Safe Mode first).
If that works, reopen Firefox Safe Mode, but use the dialog option to '''Restore default search engines''' as shown at https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window and press the '''Make changes and restart''' button. -
I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.
Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?
-
My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?
Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716) -
Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?
It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it. -
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router.
Maybe you are looking for
-
HT5071 are there any other templates we can choose from?
Are there any other templates I can choose from or I can buy?
-
Problems with EventSource generating two different types of event
Hi everybody, i was trying to connect an EventSource (capable of generating two different event types: a MapEventType and a TupleEventType) to two CQL processors through two separate channels, each one dedicated to its event type: ASSEMBLY: <?xml ver
-
Context Directory Agent VM Requirements
The CDA installation guide has a few undocumented issues around the vmware requirements. I have ran into issues that are documented on the forums such as the scsi controller and the nic settings. here is a thread of the lsi controller that must be se
-
Debug Messages missing in Forms 9i?
When running a form from forms designer with debug messages checked I don't get a message displaying the trigger name, I only get a Please Acknowledge Message alert box. Is there a setting that I may have inadvertently set that would prevent the mess
-
DCNM 6.2 Install on N1010, how to generate a CSR ??
Hi, does anyone know the process of generating a Cerificate Signing Request fpr DCNM 6.2 on N1010 ? This process is only documented for windows --> http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/dcnm/fundamentals/guide/dcnm/DCNM-SAN-LAN_p