I am having problems saving certain images

I am having problems saving certain images. For example, on Ebay while viewing an auction item, when you click on the image to view the larger picture it opens in a new window. With Internet Explorer, you can "right-click" and "save picture as". With Firefox 3.6.9 the "save picture as" option is not availabale. Other options such as save "save page as" are available, but not "save as," or "save picture as." Any ideas? Thanks

I have found a solution to the problem. Apparently there is an addon to fix this. Had no idea a specific google search for "trouble saving images on ebay" would turn up anything.
https://addons.mozilla.org/en-US/firefox/addon/13802/

Similar Messages

  • Having problems loading certain sites

    hi i am having problems with certain web pages. i can load up any web page but have problems when clicking on something with in the page that opens a new window. the window is displayed but loads up no images or text and says done in the bottom left hand corner. this means i can not use online banking or any of my other accounts online. any help would be greatly appreciated. as i cant think of what is coursing the problem. i have avg protection on my laptop and windows firewall.

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Having problems copying an image

    I'm having problems copying an image. The Image comes from my jar file and I'm trying to copy it to my hard drive. The problem is that it seems to add extra characters at the beggining and maybe at the end as well. I used a Hex Editor to compare the contents.
    Anyway I was wondering if anyone could offer suggestions.
    My code is listed below in case that helps.
    "in" is an InputStream, "content" is a byte array, and "out" is an OutputStream
    try {
       in = getClass().getResourceAsStream("LoveGameSm.gif");
       content = new byte[in.available()];
       out = new ObjectOutputStream(new FileOutputStream("Tmp.gif"));
       in.read(content);
       out.write(content);
       out.flush();
       in.close();
       out.close();
    catch(Exception e)  {
       e.printStackTrace();
       return null;
    }

    The problem is in the use of ObjectOutputStream... this does not work the way you think it does. It is used to serialize an object to an output stream. A serialized object is just the on-disk representation of a Java object. So, you are getting a serialized copy of a byte array, which is why there are extra characters.
    Instead, just leave off the ObjectOutputStream stuff, and write to the FileOutputStream. Better yet, wrap it in a BufferedOutputStream to increase performance.

  • Since installing LION having problems getting photo images to upload?

    since installing LION having problems getting photo images to upload? anyone else havie this problem? I did finally get a message that the format was wrong, but I have changed nothing on my camera. Only change was the installing of LION.

    This is from the Kodak site which says there is no Lion compatible driver/software yet, but it is coming in late August:
    http://support.en.kodak.com/app/answers/detail/a_id/41646/kw/os%20x%20lion/selec ted/true
    If you don't want to wait there is always this kind of device for less than $10 (I don't own or endorse it):
    http://www.walmart.com/ip/Moultrie-USB-2.0-SD-Card-Reader/14972138

  • I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

    I am having problems with certain websits that require adobe flash player

    Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

  • Having problem saving longer name in system 10.4.11?

    having problem saving longer name in system 10.4.11 and try to copy file from server its changes name into shorter form

    Hello, is it just 'Showing a shorter name, or actually shortening it?
    How long are these names?

  • Having problems saving contacts on 4s after reset caused by disabling

    Am having problems saving contacts manually on my iPhone 4S after total restore caused by disabling. Can anyone help.

    In case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
    menu--installations--application manager--remove the unwanted application....... in ur case themes
    menu--tools--memory---options---format memory card......
    remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
    or insert ur card in any reader or laptop and check for virus and also the hidden folders....... if there is something left of the application then u will find it in the hidden folders and delete it.......
    Articles posted courtesy engadget
    keep us updated about the progress.... if u like wat I have to offer then click on khudos.

  • Imovie: i am having problems sizing my image

    imovie: i am having problems sizing my image when i convert the cells into a 'project'.
    I can see all the image in full, - until i drag it into project area, then in the view window the image is too large and is cut in half.
    i have adjusted the PAL size . large full view etc..
    I tired exporting and even when exported to quicktime, the image is cut in half.
    does anybody have any idea what the problem is?
    thanks

    Hello lucglobal68,
    The following article contains information regarding the options you have with cropping (or not cropping, if you'd like the entire image to show) images in iMovie.
    iMovie '11: Crop video clips or still images
    http://support.apple.com/kb/PH2232
    Cheers,
    Allen

  • Having trouble saving an image of the whole page using pdf it. I click save, but not in the file. I have tried saving in multiple locations, saing it as .jpg

    Just about 2 days ago I started having a problem saving a jpg file using the "pdf it!" add-on. It lets me save, but when I look in the folder there is nothing there? I use save as image and then whole page. I have tried saving in several different locations, but nothing works.
    Thanks for the help.

    The link to website of the developer is broken too !

  • Having problems saving files in CS2

    I'm learning the program: Classroom in a book from InDesign CS2. In the beginning when the file was small I was having no problem saving the doc. But after The doc got bigger and I had done many things to it, I would save the doc, the save word in file was gray as it is suppose to be, then I would close the file. When I reopened the doc all my work would be gone. I have recreated this 3 times now and the same thing keeps happening, NO SAVED FILE. What am I doing wrong??? Thank you advance for your help, Sherrine

    How are you opening the file (double-clicking an icon, File > Open,
    File > Open Recent, etc.)? Are you saving/opening over a network? It
    sounds to me like you may be opening the wrong file. Try doing some work
    on the file, and then Save As to a unique name. Then use File > Open
    Recent to open the file and see if your changes are there.
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Having problems Masking unwanted images

    I am attempting to process video images of fish passing at a hydroelectric dam and extract the fish from turbulence and other debris in the water. The data was collected on digital video tape and sent to the computer using an NI-1409 card for processing using LabVIEW 6.1. Initial filtering of the data filters most unwanted particles out, but leaves some, and then using IVB ShapeMatch.VI with a fish image works pretty well to identify the actual fish images. However, when I output the data to a file particles from after the initial filtering and fish data are both written to file (data such as center X, center Y, # of pixels etc.). I have tried using Shape Mask FIlter.vi to mask images that don't meet the minimum value for the
    image used in the IVB Shape Match.vi but it hasn't helped, I've even set the acceptance value to 1000. Am I using the wrong mask filter or is there a better way to accept only the desired images? I've attached a copy of the LabVIEW program (I haven't tried to organize the from panel yet).
    Thanks,
    Mark
    P.S. You may see this twice. I received an error the first time I sent it and sent it again
    Attachments:
    big_fish_works2.zip ‏83 KB

    Mark,
    Without images to process, it is difficult to see where the information is changing, but from the sounds of it, you are seeing information you thought was lost being saved in your report. If this is the case, you are most likely not saving the image buffer that you think you are, or there is a race condition where it is being saved before its processed. I know this sounds basic, but insert Windraw windows in your program so you can see you image as it is processed. It helps to use the Vision IMAQ Copy (White vi) so you can see the image at each stage, and it does not change its display as you proceed though the program. This will help so you can see exactly what particles are being sent to the file.
    Best Regards,
    Chris D

  • Having problems saving images on safari after iOS 7.1 update -

    whenever i use safari to search images on Google and i want to save the image i hold down and i have the following options
    > Open
    > Open in New Page
    > Add to Reading List
    > Copy
    but no
    > Save Image
    i have to click onto the actual picture which directs me to its original web page where it was posted to be able to hold down onto picture for "save image" option to appear whereas before the update it was simpler to save images on the search result page instead on having to open the pictures up individually. Has anyone else come across this annoying new feature? instead of simplifying things they've slightly made it more of a hassle to save images grrrr

    Hi Captwoodse,
    Thanks for your reply, after trying your method i actually found out that if i click on a picture in google images mode in safari and don't wait for it to fully load and hold down my finger on the picture the save image option comes up amongst the others. However if i do wait for it to load completely i only have the options i listed in my original question. I tried your technique you suggested but again it was hit and miss with save image option appearing. So it looks like ill just have to be quick with my thumb and press down on picture before it loads! Lets hope my EE 4G connection is slower then my thumb skills  
    Thank you none the less  

  • Problem saving an image to disk - sometimes its black??

    Hi i'm trying to create a thumbnail of an image and save it to disk using Image and Graphics2D. The problem i'm having is that sometimes when i save the image its blank\black, it seems totally random in doing this i.e. it will work find one time and then not work the next time (i'm actually processing a whole folder of images in my program)
    Image image = new ImageIcon(imgfile).getImage();
    BufferedImage bi = new BufferedImage(100,100,BufferedImage.TYPE_INT_RGB);
    Graphics2D g2d = bi.createGraphics();
    if(image.getWidth(null) > image.getHeight(null)){
    // create landscape image thumbnail     
    image = image.getScaledInstance(133,100,Image.SCALE_DEFAULT);
    // here i'm cropping the image so that its square + focusing the center of the image
    g2d.drawImage(image,                               0,                              0,                              100,                              100,                              15, // start x coordinate                         0, // start y corodinate                         115,// end x corodinate                         100,// end y coordinate                         null);                              
    else...
    If anyone could shed any light on to why this problem is occuring i would be really greatful, its driving me nuts! :P
    btw: if anyone knows of a better way of doing this please let me know to. i'm sure u should b able to scale the image and crop it just using Graphics2D, just dont know how though...
    Many Thanks,
    Tom

    some of the images that i'm processing are dark but there are many others that aren't, all images that are outputed are totally black.
    I'm kind of suspecting that it may be a case of the image isn't being fully loaded when the scale\crop is performed. i have noticed that the larger the file\resolution the more likely it will be draw\saved correctly.,this leads me to beleave that the problem may lie in the loading...
    I have been looking at MediaTracker as that seems to be meant for this sort of situation but all the examples i see involve JFrames\Applets which my program doesn't make use of. Am i right in thinking that MediaTracker requires a java.awt.Component when being created? is there anyway round of this or is there anything else you can think of that i could use to do a similar job?
    Many Thanks, Tom

  • Having problems scaling down image

    Hi there, I was hoping somebody here may be able to answer a query I have.
    I'm currently creating the following icon in Illustrator:
    The Image was created within illustrator using the shape and pathfinder tools, the problem I'm having is that when I come to scaling it down, this happens:
    The strange thing is that when I scale the icon upwards it does it perfectly as it should, but the problems are coming from scaling it down.
    I think it may have something to do with the size of the image already, it's quite small, approximately 50px accross. I'm looking to get it down to about 25-30 px accross, but when i take it down to about 40px the distortion occurs and gets worse as I make it smaller.. I thought it may have something to do with the handles on the anchor points overlapping? But I'm not so sure as I've never had an issue like this before, although I've never worked at this small scale before either.
    Any help on this is much appreciated.
    Thanks in advance,
    Lionel.

    In your transform palette turn OFF align to pixel grid, prior to scaling. Adobe since CS5 has made that to be on by default when you create an RGB document.

  • Having problems accessing certain web pages online.

    I have no problem going to web pages when I bypass the airport extreme. When I connect my G4 notebook to the airport extreme it does not allow me to go to certain web pages.

    I'm having the same issue too! I noticed it the night I installed Leopard, so I was thinking it was Mail and Safari 3 acting up. But tonight I unhooked the AEBS and was able to access my site and email just fine.
    I've tried resetting the AEBS several times, but it hasn't helped.

Maybe you are looking for