I am having trouble installing Itunes 11.1.1.  I get an error message 2502 and 2503.  Any help in this regard would be appreciated.

I am having troble installing Itunes 11.1.1.  I get erro message 2502 and 2503.  Any help?

Windows 7 32 bits
I had the same issue which is now solved. For your information, the following procedure was successful:
Check permissions within the Installer folder. To do this, follow these steps.
1. Click on Start and in the Start Search bar > type in > c: /windows/installer.
2. Right click on c: /windows/installer at the top under programs and click properties.
3. Click on the security tab > Verify if System and Administrator account has Full access permissions.
Note : I ran into problem with locating the C:\windows\installer directory. For some reason Windows Explorer wouldn't show it even though I don't have it hidden. I ended up using the ExplorerXP application to locate the directory. ExplorerXP is available at http://www.explorerxp.com/

Similar Messages

  • I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

    i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me  a message says "the file location is not a valid installation packaage for the product iTuness.  Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes".  Any help, insight, guidance would be greatly appreciated!!

    "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

  • HT1222 Every time I try to install an update for iTunes 11.0.2, I get an error message 103.  Has anyone else had this problem and found a way to fix this?

    Every time I try to install an update for iTunes 11.0.2, I get an error message 103.  Has anyone else had this problem and found a way to fix this?

    I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
    You need to backup your computer then uninstall I-tunes and reinstall itunes.
    Delete iTunes
    Deleting iTunes is not recommended unless you know what you’re doing.
    Launch Terminal from the UTILITIES within Applications
    Type the following commands:
    cd /Applications/
    This brings you into the Applications directory, the next command deletes iTunes itself:
    sudo rm -rf iTunes.app/
    Enter the Administrator password to confirm
    There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
    Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
    You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
    http://www.apple.com/itunes/download/

  • Installing itunes to my laptop I get an error message  Apple mobile device service fail to start verify that you have sufficient privilegesto start system services

    Installing itunes to my laptop I get an error message  (Apple mobile device service fail to start verify that you have sufficient privileges to tart system services)

    You seem to have installED iTunes and are trying to connect your iDevice, is that right?
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Your statement - "installING" - also might indicate that you have insufficient privileges in Windows to properly install & use iTunes.
    If you can't install or update iTunes for Windows - Apple Support
    ÇÇÇ

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Error messages 2502 and 2503 when trying to install itunes to my computer

    I have attempted to download itunes to my windows 8 operating system computer and it keeps telling me that it has encountered and unexpected error installing this package.  This may indicate a problem with this package.  The error messages are 2502 and 2503.  Any help?

    I did find one post saying to download to "downloads" folder, wherever,,,, then right click, and Run as Administrator and don't just click run from the online prompt. Mine installed without a hitch. All the programs, I-Tunes, Quicktime, and Steam installer for games.
    who'da thunk it? It finally works, I can load my I-pod Nano, "gen 5", and view quicktime vids.

  • I cannot install iTunes 10.5.  I get an error message stating that itunes.msi cannot be found

    How can I fix this?  I have the iPhone 4S and need to install iTunes 10.5 in order to connect the iPhone to my laptop (Windows Vista).  Does anyone know how I can resolve this issue?

    "try this:
    Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
    then type in:
    netsh winsock reset
    After this restart - it worked for me perfectly

  • When i install itune 10.5 manually i get the error message invalid drive g:/ at the end of installation and it stops. any suggestions

    i tried downloading itunes 10.5 and it fails.  so i tried downloading it manually.  at the end of the  installation it says invalid drive G:/ and then it stops.   i do not have a drive g anyone have suggestions.

    As per our offline discussion . This the query that worked.
    >SELECT ' The '||CASE
    WHEN SSS.STEP_TYPE='F' THEN 'INTERFACE'
    WHEN SSS.STEP_TYPE='VD' THEN 'VARAIBLE DECLARATION'
    WHEN SSS.STEP_TYPE='VS' THEN 'SET/INCREMENT VARAIBLE'
    WHEN SSS.STEP_TYPE='VE' THEN 'EVALUATE VARIABLE'
    WHEN SSS.STEP_TYPE='V' THEN 'REFRESH VARIABLE'
    WHEN SSS.STEP_TYPE='T' THEN 'PROCEDURE'
    WHEN SSS.STEP_TYPE='OE' THEN 'OS COMMAND'
    WHEN SSS.STEP_TYPE='SE' THEN 'ODI TOOL'
    WHEN SSS.STEP_TYPE='RM' THEN 'REVERSE ENGINEERING MODEL'
    WHEN SSS.STEP_TYPE='CM' THEN 'CHECK MODEL'
    WHEN SSS.STEP_TYPE='CS' THEN 'CHECK SUB MODEL'
    WHEN SSS.STEP_TYPE='CD' THEN 'CHECK DATA STORE'
    WHEN SSS.STEP_TYPE='JM' THEN 'JOURNALIZE MODEL'
    WHEN SSS.STEP_TYPE='JD' THEN 'JOURNALIZE DATA STORE'
    END||' '||SSS.STEP_NAME||
    ' , has failed due to - '||
    SNET.TXT
    FROM
    <%=odiRef.getObjectName("SNP_SESSION")%> SS
    LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_SESS_TASK_LOG")%> SSTL ON (SSTL.SESS_NO=SS.SESS_NO)
    LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_SESS_STEP")%> SSS ON (SSS.SESS_NO=SS.SESS_NO)
    LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_EXP_TXT")%> SNET ON (SNET.I_TXT=SSTL.I_TXT_TASK_MESS)
    WHERE SSTL.TASK_STATUS='E'
    AND SS.SESS_NO ='<%=odiRef.getPrevStepLog("SESS_NO")%>'
    AND ROWNUM=1

  • I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

    I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I am having trouble installing iTunes

    I am having trouble installing iTunes, getting the error stating that apple application support was not found. I have uninstalled and re-installed several time. I followed the directions giving on installation problems in the support area. Help please.

    Report the problem to Apple using Apple Support -- if it is 11.3  there is a problem with podcasts - and last time I checked on=line support page was not found.

  • We connected My new iPad to My wifes computer after having trouble installing iTunes on My computer. Nos My wifes appleid and her stuffit is in My iPad . We sant to get her id and stuffit away fr.o.m. My iPad witherspoon her own stuff left where it belong

    My new iPad was connected to My wifes computer after having trouble installing iTunes. My wifes appleid and stuff ended up in My iPad. How do we change to My new appleid and get hers out of My iPad? Without damaging her account?

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

  • HT4236 I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

    I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

    There is a whole lot of bad going on there.
    There are problems both drive errors and USB errors.  I don't believe it.
    I have a hunch the drive is starving for power. 
    USB devices are supposed to function all the way down to 4.25V.  Not all do.
    USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA.  Not all do.
    USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more.  Some violate that.
    USB 2.0 devices are never supposed to draw more than 500mA. Some violate that.  Especially disk drives.
    My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1].   Does your drive have the option for external power?  If so try it.  Following up on wtx's comment;  USB 3.0 is capable of delivering more power.   Also, some drives have used a cable that violates just about every aspect of the USB specification:  A "Y" cable that plugs into two host ports to provide more power to the guest.  I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
    edit:  [1] Teats Up.
    Last edited by ewaller (2015-04-04 17:02:04)

  • Every time I try to install itunes on my PC I get the following message, and I can't seem to find a solution. Any help out there?? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."

    Every time I try to install itunes on my PC I get the following message, and I can't seem to find a solution. Any help out there?? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system?  How do I get Itunes back?

    I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system?  How do I get Itunes back?

    i get a message saying error 7 (windows error 127)

Maybe you are looking for

  • Data Fields & Key Fields IN DSO

    Hi Guys, Can any one tel me what exactly key field holds & Data field hold in DSO. Thanks, Venkatesh

  • Top N Parameter

    Hello Experts - I'm using the Top N Parameter variable supplied by SAP but its not functioning the way its supposed to. No matter what number I give in the prompt, I get all the rows. Rows: Sold-to party Material Statement Grp Columns: Billed qty Net

  • How do I get FInal Cut Pro to save the render files?

    Final cut used to work really great, but lately it has stopped saving any render files, so ever time I try to edit something new it starts re-rendering all of my other files and slows it down to the point of crashing a lot. Is ther any way to fix thi

  • Having trouble with global extension installation on Firefox 3.6.3

    I am having trouble installing extensions globally on Firefox 3.6.3. As you know the -install-global-extension switch has been removed and you cannot point to the XPI in the registry any more. What I have done to get the extension ID and confirm it h

  • ProPhoto RGB missing

    I cannot see the ProPhoto RGB colour space in the RGB dropdown of the Color Settings window. CS6, Windows 8 pro, 32- and 64-bit. How can I access it?