I am having trouble logging in to my iTunes Account. When it ask mI am having trouble loe to verify my payment information. I check that everything is correct and it gives me this error message " Please contact iTune support to complete this transaction"?
I am having trouble logging into my iTunes Account. When it ask me to verify my payment information. I verify that all the information is correct and press the done tab and get back this error message " Please contact iTunes support to complete this tranaction". What do I need to do to correct this problem because I can't buy anything with this problem? I have also made sure I have the latest version of iTunes.
check all payment parts are filled in and u have endered you last 3 digs on back on card used to set up account
if using an other computer make sure all fileds are right and filled in
and u enter to itunes sec code
Similar Messages
-
Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error message "Please contact iTune support to complete this transaction" when I was trying to purchase an app????
Help!! Any one experience this issue???
iTune support, "You are violating the iTunes Store Terms and Conditions specifically, however we're unable to speculate. You are not authorized to purchase from the US iTunes Store. From here please continue to review the terms and conditions in detail for further information."
Do you guys even read the "Terms and Conditions" ? There are thousands of words. who know what term I am violating. It works fine before 12/01/2012...I bet they don't even know what caused this problem...They keep asking me to read it without solving the problem..."Dose that just happen after December 2012??"
No. It has always been that way.
"So people who live in USA and while travel to other country are not allowed to buy anything? "
Correct.
"how about people who work oversea for long term?"
They would need an itunes account based in the country in which they live.
"The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance."
http://www.apple.com/legal/itunes/us/terms.html#SERVICE
It is the same for all countries itunes stores. -
Error Message: Please Contact iTunes Support to complete this transaction.
I am trying to buy Fanta Points in a game called Fantasica, however, when I try to make a purchase, after I am prompted to give my Apple ID and password, it gives the message, "Please contact iTunes Support to complete this transaction." I don't understand why I get this message, because I am able to make one purchase, but when I try to make another, that is when I'm prompted and am no longer able to make any purchases for several days. Is there any way to fix this without me having to pay the $20 cost of calling iTunes support?
i want to change my billing credit card same as other i received
Error Message: Please Contact iTunes Support to complete this transaction.
i'll try to do as Roshanalex guide, but still i have the same problem... -
Hi Expert,
I need help.
I created a custom button to download data to an excel sheet. after clicking the button I am getting message
"An error occurred; please try again. If the error persists, please contact technical support.".
I tried debugging WCEM, but it is not even reaching that point.
Your help will be highly appreciated.
here is the code.
BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
UI-repository.xml
<ViewComponent name="BITContentView" componentHandlerClassName="com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl.BITDetailViewVCHandler"/>
BITDetailViewVCHnadler.java
package com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl;
import com.cpr.cprwec.app.comm.module.ebpp.backendobject.interf.EbppBackend;
import java.io.IOException;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.List;
import javax.faces.context.FacesContext;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.impl.EbppModuleAccessImpl;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.interf.EbppModuleAccess;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.DisputeDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.OpenItemDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.DisputeDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.OpenItemDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDetailDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDetailDTO;
import com.sap.wec.app.common.module.common.attachment.businessobject.interf.Attachment;
import com.sap.wec.tc.core.backend.sp.jco.JCoConnection;
import com.sap.wec.tc.core.businessobject.BusinessObjectException;
import com.sap.wec.tc.core.common.exceptions.ApplicationBaseRuntimeException;
import com.sap.wec.tc.core.common.logging.WCFLocation;
import com.sap.wec.tc.core.common.searching.businessobject.impl.GenericSearch;
import com.sap.wec.tc.core.common.searching.businessobject.interf.GenericSearchReturnResultData;
import com.sap.wec.tc.core.common.util.GenericFactory;
import com.sap.wec.tc.core.common.util.Message;
import com.sap.wec.tc.core.common.util.MessageList;
import com.sap.wec.tc.core.common.util.table.Table;
import com.sap.wec.tc.core.common.util.table.TableRow;
import com.sap.wec.tc.core.modulemgmt.ForeignModuleAccess;
import com.sap.wec.tc.core.modulemgmt.ModuleAccess;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleInactiveException;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleLifecycleException;
import com.sap.wec.tc.core.runtime.WecFrameworkRuntime;
import com.sap.wec.tc.core.runtime.WecSession;
import com.sap.wec.tc.core.runtime.jsf.WecFrameworkRuntimeJSF;
import com.sap.wec.tc.core.runtime.jsf.composition.PageManagerBean;
import com.sap.wec.tc.core.runtime.navigation.NavigationCondition;
import com.sap.wec.tc.core.ui.composition.menu.MenuManager;
import com.sap.wec.tc.core.ui.composition.menu.MenuMetadataException;
import com.sap.wec.tc.core.ui.vc.BuildTime;
import com.sap.wec.tc.core.ui.vc.NavigationParameterBinding;
import com.sap.wec.tc.core.ui.vc.RequestParameterBinding;
import com.sap.wec.tc.core.ui.vc.impl.ViewComponentHandlerBaseImpl;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.interf.BIT;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.impl.BITImpl;
public class BITDetailViewVCHandler extends
ViewComponentHandlerBaseImpl<EbppModuleAccess> {
protected static final WCFLocation LOCATION = WCFLocation
.getInstance(BITDetailViewVCHandler.class.getName());
public BITDataDTO bitDataDTO;
public BITDetailDTO bitDetailDTO;
public List<BITDataDTO> BITDataDTOList;
public List<BITDetailDTO> BITDetailDTOList;
public boolean noBITData;
public boolean noBITDetail;
public boolean renderPanel = true;
public boolean isDownloadBITData;
public boolean isDownloadBITDetail;
public boolean downloadStarted=false;
public boolean BITFound =false;
public boolean isBITFound() {
return BITFound;
public void setDownloadStarted( boolean downloadStarted ){
this.downloadStarted = downloadStarted;
public boolean getDownloadStarted(){
return this.downloadStarted;
public void setBITFound(boolean BITFound) {
this.BITFound = BITFound;
public String getObjectID() {
return objectID;
public void setObjectID(String objectID) {
this.objectID = objectID;
public List<BITDataDTO> getBITDataDTOList() {
return BITDataDTOList;
public List<BITDetailDTO> getBITDetailDTOList() {
return BITDetailDTOList;
public Boolean getNoBITData() {
return noBITData;
public Boolean getNoBITDetail() {
return noBITDetail;
public Boolean getRenderPanel() {
return renderPanel;
private static final int DEFAULT_BUFFER_SIZE = 1024000;
public Attachment attachmentData;
public Attachment getAttachmentData() {
return attachmentData;
@RequestParameterBinding(maxLength = 1024)
protected String objectID;
@BuildTime
public String processBuildTime() throws BusinessObjectException {
BIT BIT = null;
noBITData = noBITDetail = false;
renderPanel = true;
if (isLoggedIn()) {
if ( isDownloadBITData == true ){
this.downloadBITDataExcel();
else {
this.getModuleAccess().getBITBO().clearMessages();
BIT = this.moduleAccess.getBITBO().getBITFromBackend(objectID);
BITDataDTOList = BIT.getBITDataDTOList();
BITDetailDTOList = BIT.getBITDetailDTOList();
MessageList objectData = this.getModuleAccess().getBITBO()
.getMessageList();
if (objectData.size() > 0) {
noBITData = noBITDetail = true;
renderPanel = false;
this.addMessageList(objectData);
return checkLoginCondition();
private boolean isLoggedIn() {
return checkLoginCondition() == null;
private String checkLoginCondition() {
NavigationCondition navCondition = getNavigationCondition("login");
if (!navCondition.isFullfiled()) {
navCondition.addToNavigationStack();
return navCondition.getOutcome();
return null;
public String downloadBITData(){
downloadStarted = true;
isDownloadBITData = true;
downloadBITDataExcel();
return checkLoginCondition();
public void downloadBITDataExcel() {
// dummyDebug("downloadBITDataExcel", BITDataDTOList.size(), "", "" );
if (BITDataDTOList.size() > 0) {
try {
attachmentData = this.getModuleAccess().getDownloadBO()
.getBITDataExcel(BITDataDTOList);
if (attachmentData != null) {
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces
.getExternalContext().getResponse();
response.reset();
response.setContentType(attachmentData
.getAttachmentMimeType());
response.setContentLength(attachmentData
.getAttachmentContent().length);
response.setHeader("Content-disposition",
"attachment;filename="
+ attachmentData.getAttachmentName());
response.setBufferSize(DEFAULT_BUFFER_SIZE);
ServletOutputStream out;
try {
out = response.getOutputStream();
out.write(attachmentData.getAttachmentContent());
out.flush();
faces.responseComplete();
} catch (IOException e) {
throw new ApplicationBaseRuntimeException(
"Problem opening file", e);
} finally {
attachmentData = null;
} catch (BusinessObjectException e) {
e.printStackTrace();
isDownloadBITData = false;Thanks Hamendra for checking the issue.
I am setting up breakpoints in WCEM, tab JAVA EE then from menu RUN->Toggle brekpoints and then debug configuration.
the breakpoints are in several places in handler class BITDetailviewVCHandler class including method downloadBITData.
this method I am calling from BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
When the BIT page is loading the control stops at the breakpoint.
but it is not stopping there when i click the 'Excel Download' button.
How do I get the log file. I am very new to WCEM, please guide me.
I tried to debug the UI using Google chrome. it is giving me the following error.
POST https://<>/<>/<>/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US 500 (Internal Server Error)
when I expand the node
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66
(anonymous function):<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:30
c.extend.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:24 c.fn.c.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66 c.fn.extend.trigger:<>/<>/javax.faces.resource/<>dev/comp.theme/templates/jquery/js/commandButton.js.jsf:31
com.sap.wec.commandButton.submitForm:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&objectID=500000233&page=D61CFFF8E75D48A1B348F315D209EFF9&wec-locale=en_US:48 onclick
Navigated to https://wsapdjd803.<>.ca:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US
Seems to be it is failing somewhere commandButton-related JavaScript functions
Thanks
Subassish -
To create an iTunes account with a gift card, I receive this message at the end: Contact iTunes support to complete your transaction. And then, nothing! What the **** is it?
It means contact itunes support
-
CC Tab says "Download error. Please contact customer support."
When I started my laptop this morning CC had a red ! on its icon and the follwing message under Apps:
"Download error. Please contact customer support."
I've got 2 issues with this:
I don't recall downloading any apps yesterday
and the handy link does not send me to customer support, in fact I couldn't find any way to send a message to "customer support" and spent too much time looking. (maybe you guys could change the wording to something else--everybody has other things to do)
The question is how do I make this message go away? I tried quitting and restarting CC
FYI-yesterday I removed 3 adobe internet plug-ins because I prefer Safari the way it is. CC worked fine with those removed before the restart so I'm guessing its unrelated at this point.http://status.creativecloud.com/ shows everything green, but when I go to https://creative.adobe.com/products/creative-cloud I get a
The Creative Cloud Download Center is currently unavailable.
We're working quickly to resolve the issue and we apologize for the delay. If you have the Creative Cloud app already installed on your machine, you can try using it to access new downloads and updates. Otherwise, please check back or see our status site for updates.
Thanks for your patience! -
Error... "Download error. Please contact customer support"...
I'm trying to download Photoshop CC and Flash CC...
It dosen't work...
It's keeps saying "Download error. Please contact customer support." I re-installed this twice, but it didn't do anything. Can someone help me?
My computer is ASUS Windows 8.Hi Troll,
Please refer to the threads below where this issue has been addressed:
1. Creative Cloud "Download Error" message
2. Creative Cloud - Download error - stubborn error
Regards,
Sheena -
Error "please contact apple support to complete transaction"
Hello!
I'm from VietNam, i have some problem to be solved and i will tell you detail.
I have got help from my friend to create ID iTunes US for me because my computer notified error "please contact apple support to complete transaction". Then he gave ID to me and i want to edit some information but it notified that message again. So i use VPN to done it. Few days later, i have earned gift card for my ID and i have to purchase coin in-app (clash of clan) but the message repeat again. I try to use VPN to purchase it but useless. I have contacted to apple support (he is Kretz) 2 times but it isn't fixed. I hope that time will be success, it will be fixed by you or you can guide me how to fix it.
Thank you so much.Hello,
Have you Tried telephonesupport yet? The First 90 days after purchase of your iPad its free. -
Please contact iTune support to complete the transaction.
I'm living in Hong Kong! I use US iTunes account to make game and in-game purchase by using US iTunes gift card to credit on it, where I found it from local retailshop. To be honest, I don't have the real Address in USA nor a Credit Card so I just selected "None" and randomly put in a random name, an address and a phone number when setting up the billing info year ago. Today I bought 7x $25USD iTune Gift Card and redeemed 5 of them ($125USD) into this account, and tried to purchase in game content (Order and Chaos Online) that costs $99.99USD. However, there is an error in the transaction. It said "Please contact the iTune Support to complete the transaction", after contacting the iTune Store by using Expresslane, I went to back to my account info and try to edit the billing address, the another error happen "You must verify your payment info before you can make purchase" so I try to edit my info again and it says "Please contact the iTune Support to complete the transaction". Come on already, why the heck it needs my billing info as I'm paying it by my redeemed credit? It used to work a few months ago but not now. Please help and fix the issue. Thank You.
I'm living in Hong Kong! I use US iTunes account to make game and in-game purchase by using US iTunes gift card to credit on it, where I found it from local retailshop. To be honest, I don't have the real Address in USA nor a Credit Card so I just selected "None" and randomly put in a random name, an address and a phone number when setting up the billing info year ago
You can only redeem gift cards from the same country where you reside.
Read here > The Complete Guide to Using the iTunes Store | iLounge Article -
In short Upon verifying my payment and billing options, I was sent back to the same screen with an error message stating,
contact apple support when trying to download mavericks. I dont know what to do at this point.You can also try App Store support.
App Store support. There is troubleshooting and a contact link.
Support -
Hi,I was trying to buy an in-app purchase,but of successful. It keep pop up a message asking me to contact iTunes support to complete the transaction. What should it do?
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Why I purchase in game credit showed up please contact iTunes support to complete the transaction ? My card still have balanced inside why cannot purchase ?
You should do exactly what it told you to do and find out.
Contact itunes support -
When going to payment information, why does it say to "please contact customer support to complete this transaction"? How do i fix this to be able to purchase apps again?
Why? Presumably because there is a problem of some kind.
How do you fix it? By contacting customer support I presume. It's certainly the best (and probably the only) option available to you. -
I wanted to buy an application, but always an error (contact itunes support to complete the transaction). Apple removed the $ 2 and no result. ( price on application 0.99 ) . Rogues !!!!!!
sorry for my english )
Maybe you are looking for
-
I am not able to send outgoing mail on my ipad. i keep getting there is an error on relaying
Is anyone having this problem on with theie ipad?
-
Multiple messages in one file problem (HL7 v. 2.3)
I'm new to HL7 ver 2.3 and am trying to receive a file that has multiple messages in it. I've been terminating each segment with a line feed (0D) and have been trying to separate each message with a carriage return also (0A). B2B is able to parse the
-
Auto-Cropping gang-scanned photos! HELP
I need help figuring out how to correctly divide scanned photos automaticly. Photoshop Elements 10 had a preset to do this but everytime we go to use it, it crops them wrong. This is the sole reason we purchased Photoshop Elements 10. It's cropping r
-
I'm an existing Flex 2 customer, and would very much like to migrate m development to Linux. However, I need to generate applications, which use flex charting, and would like to get rid of the 'Flex Charting Trial' message. Is there a way to reuse th
-
Recently ran out of space on c:
I used the preferences to change my iTunes library location from my c: drive to my j: drive where I had a lot more space. Unfortunately, now my iTunes can not location any of the purchased music, tv shows or movies I previously purchased. How do I ge