I am in pakistan city karachi and not finding in my i tunes payment type opption "none", i am in pakistan city karachi and not finding in my i tunes payment type opption "none"
i am in pakistan city karachi and not finding in my i tunes payment type opption "none", i am in pakistan city karachi and not finding in my i tunes payment type opption "none"
Hi
Go to Site Manager > Module Templates > Online Shop Layouts > Receipt Buy to locate the message that is generated.
You can customize it in any way you see fit, so you could include a script to redirect the user to another page.
Kind Regards,
Alex
Similar Messages
-
i bought an iphone 4s for my girl friend as a gift and it is now in the philippines, when i try to play the music from non iphone player it does not work when i put it in the charging port of it, on my iphone 4s it works fine, no i am in cebu city and the phone that does not work will be here too, so who can i bring it to since the phone was bought in february while the phone is here in cebu city philippines, i will be coming home to the states the end of june so do i really need to bring the phone with me, thanks
kendal chowUm, okay... thanks for sharing.
Did you have a question for this user to user technical support forum? -
HT2534 i could not found Payment type of opption :None" in my itunes
i could not found Payment type of opption :None" in my itunes
What country are you in ? I tried it a couple of days ago and it allowed me to create a new account with 'none' as the payment type. You followed the instructions on it exactly (it's for crreating a new account, not for updating an existing one) i.e. you are selecting a free app in the store and clicking on the 'Create Apple ID' when 'buying' it ?
-
My Droid will not power on. Yesterday none of the apps would work and today. Nothing at all.
Yesterday, none of the apps on my phone would work. Texting and calls went through fine. This morning I woke up with the initial set up screen showing, I went through the process but, still had no access to apps. About an hour later, the phone shut off and will not come back on. What happened and how do I fix it or can it be fixed?
It possible from reading your post that you may have let the phone battery go into a deep discharge state without knowing it. If that is the case your battery voltage is far to low to reboot your device in a normal manner.
Try restarting the phone in a safe mode to reduce app use and voltage and current needed. Do this while the original AC charger is connected to your device and plug into the AC outlet, this will help sometimes to give your device an extra voltage kick to restart the normal battery cycle. However if your device has gone to low in the voltage cycle you may need a new li-ion battery installed. -
I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.
I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7
-
I bought my iPhone 4S in an Apple Store and use my Fido sim card. I used it with my old 3GS phone but now when I use it with my 4S phone I can't get my voice messages. I contacted Fido but they will not help as it is a non Fido phone. I'm paying $9 a month for voicemessaging but can't access it. They won't give the information to set it up as it isn't their phone. What can I do?
Verizon does not unlock the iPhone 4S for use on U.S. GSM carriers, only for foreign roaming.
-
I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac. I have just backed the phone up on my laptop but am not sure what I need to do now. I do not want to loose any contacts, emails or photos from my phone when I change sync computers. Can anyone assist with a step by step guide as to how to achieve this oucome? Thanks in advance.
Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518 -
My yahoo e-mail is not pushing to my iPhone4, again. Had this same problem for several weeks in October/November 2011. It's been a problem again for two weeks now. My kids and husband have three other types of smart phones, and none of them have had this problem. I'm NOT impressed. I've seen that others in the iPhone community have also been having this problem. Is Apple doing anything about it?
Read this: https://discussions.apple.com/message/17333604#17333604
It's a yahoo issue. Nothing you can do on your phone to fix it. -
Bottom line, I can'
t get iCloud messages on my Apple iMac, iPhone or iPad2. I dropped my original email account and went to gmail. I changed my Apple ID to this gmail address on the Apple Store, etc. I've also changed the Apple ID password a few times. This worked fine until this week. I believe I can get game messages (not sure all were delivered), but not iCloud messages. It asks me for the iCloud password, which none work, and then goes back to my old
apple ID and asked for a password. It asks me to reset the password, which I click, but nothing happens. How can I fix this so I know I'm getting all my messages?Hi rjt,
Sounds like you did not delete the iCloud account on your device before you changed your ID. You will need to do the following:
1. Sign onto Manage your Apple ID and change your Apple ID back to the old ID (this is temporary - do not verify it, do not change the password): Apple - My Apple ID
2. Go to Settings>iCloud and scroll to the bottom to delete the account. Use your current password when asked, follow the prompts to complete the deletion
3. Go back into Manage your Apple ID and change your Apple ID back to the new ID (you may need to verify it again)
4. Go back to Settings>iCloud and sign onto iCloud with the new ID
Cheers,
GB -
Non Cenvatable material - Value not matching in MIGO and MIRO
Dear SAP experts!
We have the following problem.
We are using TAXINN.
We create a Purchase Order for a raw material, which is non cenvatable for a particular vendor.
When we carry out Goods Receipt, we change the Material type from Raw Material to Non Cenvatable in the Material Type in the Excise Item Tab and post the BED and AED values, the values are getting inventorized correctly.
And MIRO posting is also happening correctly. Both, MIGO and MIRO values are tallying. i.e, The total value is sum of Basic PriceBEDAED+CST.
But, if we change any of the BED or AED value at the time of posting GR in the excise Invoice tab, then we are facing problem.
Value during MIGO posting is correct. That is the total value is sum of Basic PriceBEDAED+CST.
But, During MIRO posting, the value of BED and AED is not getting picked.
The value during MIRO shows only Basic Price+CST and not BED amount and AED amount.
Can any one tell me, where it is going wrong.
Your response is highly appreciated.
Thanks and Regards,
Muthuraman.Kyou have to used non deductable condition type in Taxinn to post tax to inventory
that is
JMIP IN: BED inventory % say 8%
JAIP IN AED inventory % Say 4 %
JMX2 IN: A/P BED inventor 100 %
JAX2 IN: A/P AED inventor 100%
and the above condition should be assigned to proper Classify Condition Types
TAXINN JMIP BEDINVENTP BED Inventory Percentage
TAXINN JAIP AEDINVENTP AED Inventory Percentage
TAXINN JMX2 BEDINVENTT BED Inventory Total
TAXINN JAX2 AEDINVENTT AED Inventory Total
And also u will have to assign condition type JMX2 and JAX2 in Maintain Excise Defaults
this will solve your issue -
It keeps telling me that one of the USB devices for this computer has malfunctioned and windows does not recognize it. I have tried all of the ports and still am not having any luck. I have purchased 3 brand new cables and none of them are working. I have tried to update the driver but it says I am using the most up to date. I have tried to reset the Ipod by holding the center button and menu button until the apple appears. I am not sure what else to try. Any help would be greatly appreciated. My computer is Windows Vista!
Hello butterflygirlie,
Have you tried uninstalling the driver for your iPod from within Device Manager? After uninstalling it, go ahead and unplug your iPod and plug it back in. Doing so should cause your system to locate the proper driver for it.
B-rock -
I ordered two itunes cards tonight and my granddaughter didn't receive either of them!
I was unable to obtain online support of any kind.
The gift view will not allow me to edit the gift, delte or change it.
Any ideas how I can delete these from my account? Itunes support is non-existent!!She's checked the spam folder on her email account as well as the inbox ? You should also be able to try resending it (and double-check the email address) : http://support.apple.com/kb/HT1541
If you can't then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I have already set up and Itunes account, but it says that i need to reveiw the account. I guess i have not finished setting it up yet. But when i go into the payment information it says that i need to fill out the type of credit/debit card that i have. Well, i don't have one! How do i put that i have 'none?' it doesnt even have a 'none' button. PLLEEAAASseeee help me!!! Please:)
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/
Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?
-
When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID and also on r PC it has only his info none of mi
To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone. When you delete the account you will be given the option to either keep or delete the iCloud data from your phone. This also, only deletes the account and the iCloud data from your phone, not from iCloud. Your husband's phone won't be effected by this. Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account.
If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls. To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID. Then do the same thing in Settings>FaceTime.
Maybe you are looking for
-
Multiple logic scripts in a package
Hello All, How do I execute mutliple packages using a single package in datamanager? I need to execute 3 scripts. I cannot use them as *INCLUDEs on the first script because the first script has *FOR EACH PROCESS TIME statement. But the second one and
-
How do I print out the attributes of objects from a Vector? Help !
Dear Java People, I have created a video store with a video class.I created a vector to hold the videos and put 3 objects in the vector. How do I print out the attributes of each object in the vector ? Below is the driver and Video class Thank you in
-
Anyone with experience using DBMS_DATAPUMP.GET_DUMPFILE_INFO procedure?
I want to get a little bit of information about the dump file prior to trying to restore. I think the get_dumpfile_info procedure will provide me with the information I seek. However, when I try to run the code below, I get an error on the get_dumpfi
-
TS1347 Emailed calendar events won't sync with ipad calendar
Ever since I have updated to iOS 7, when I receive emails that have calander events in them I am no longer able to click the attached event and see the information or update it into my ipad calander. How would I fix this?
-
Rich forms unavailable after new JRun 4 server creation and deployment
I am running CFENT 8 in the JRun multiserver version. Yesterday I took my production server, created a WAR and deployed it as a development environment. The server functions with cfquery and I can output the data in standard HTML tables. But, if I op