I am interested in an iMac 20" but need help
I was looking into getting a new computer because the PC i have is a bit old and a bit unstable. I checked out dell because i like to play games like WoW and HL2 and BF2 and that stuff. My question is would those games run well on the windows side of my iMac if i were to install bootcamp and when i wanted to play a game boot into windows and play. in WoW's case i guess i could run it on the apple side, has anyone done that yet? does it run better on the intel chip than on the G5s? thanks for the help
I know from experience that WoW works great in OSX native. My copy with 4 cds from Amazon.com included both the Windows and Mac versions. I never tried it on a G5, Intel runs flawlessly though. (If only my dorm's network connection worked at 10pm when everyone is on it). I've also tried Boot Camp to install Windows. It works great, and I've played WoW on it too. Works fine, but some of the keys are strange because Windows keyboards have the alt and control in different places than Mac. Other than that, I know that game works greatly. Couldn't tell you about the other 2 games you mentioned, I've never played those.
Hope that helps!
Imac Intel Core Duo 1.86 Mac OS X (10.4.7)
Similar Messages
-
I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?
We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.
-
Need help with Itunes transferrs and can I use my Edge phone as a router?
I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone. -
I am un able to send mail as it gets stuck in my outbox. This is a recent phenomena. I am sure the solution is simple but need help?
I looked everywhere for a solution - and I finally figured it out! Deleting my accounts didn't work, but here is what worked. This worked when my Gmail accounts were not sending properly. I'm not sure if it works for other e-mail services.
1. While in Mac Mail, click "Mail" in the top left corner of the screen
2. Click "Preferences"
3. Click "Accounts"
4. Select your account that isn't sending properly
5. In "Outgoing Mail Server (SMTP)" there will be two options - Gmail & Gmail (offline)
Make sure that "Gmail" is selected and NOT "Gmail (offline)"
If you navigate to another section in Preferences, it will ask you to SAVE - make sure you save your changes!
It worked for me, hope it works for you! -
Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help. Can someone give me some direction ?
jpatricio787 wrote: ... is it possible to use it with my white MacBook ?...
OK so yes, but if, and only if:
(1) your MacBook has a Firewire port (not all do)
- and -
(2) your old external iSight camera works (not all do)
- and -
(3) your MacBook is working properly.
If you are not certain whether your MacBook model has Firewire, you can search MacBook Technical Specifications for your model. Alternatively, check the User Guide Manual that came with your MacBook for the information you need to be certain.
If you are not certain that your old external iSight camera works, you can test it using the suggestions in this link.
jpatricio787 wrote: ... if so how do I go about it ? ...
Follow the instructions in your iSight User's Guide to connect and turn on the iSight. Then launch the Apple app you want to use with your iSight. If you need more information about using an app, search for "camera" (without the quote marks) in the Help menu choice for the app.
jpatricio787 wrote:... Can someone give me some direction ?
If you need more direction, post back the specifics of what you still need. We will offer further direction based on the details of your reply.
Message was edited by: EZ Jim
Mac OSX 10.9.3 -
Purchasing MBA but need help on upgrades.
Hello, I am purchasing an MBA, but need help on upgrades based on the following; I will be attending medical school in the fall, I take a wide range of photos of my family on my iPhone that I play with on certain apps and do store them in the cloud and computer, I have a medium iTunes libaray but will get bigger with the additional apps for school, I am a moderate gamer (I play games online as well as my kids do, but nothing that will take up a ton of space when downloaded like Assassins Creed) and I plan on running MS Office. I've already decided to upgrade to the 8GB but I can't decide if I should upgrade to the 512GB Flash or stay with the 256GB and upgrade from the i5 to i7 or stick with it. I don't plan on buying another until I graduate. I am new to the Mac World outside of the use of my iPhone which convience me to convert from my awful PC. Can you MBA experts relay some advice on a good route. I appreciate it, Thanks
My rule of thumb is to buy the largest drive storage available. Especially since the Air models can't be upgraded to a larger size in the future. I also like to buy the most amount of RAM offer and as with the storage space on the Air models can't be upgraded once purchased. So Bite the Bullet and spend the money to get both the most RAM and the largest storage offered as neither can be increased later on. Also I suggest you spend the extra money on the Applecare extended warranty because to fix any Mac once the standard warranty is over is very expensive. You have until the one year standard warranty runs out to buy the Applecare extended warranty.
-
All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks
Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.
-
Getting a new iMac - overwhelmed w info here but need help
Hi,
I'm getting a new iMac next week and need help with Blackberry Bold 9000 issues and syncing with iCal, etc on the machine. I have been told that I can buy an app for about $30 that will sync the BB with the mac programs but reading here, I am confused - are some of the posts here and the KB notes related to syncing directly with the mac software or are they only for making a separate BB desktop for the mac?
I have looked at several of the KB notes but I haven't found the answer yet.
thanks.
marcelcat
Bold 9000 owner since Feb 2009What’s the difference between:
8GB 1066MHz DDR3 SDRAM - 4x2GB http://Add $200.00...
(from 4GB 1066MHz DDR3 SDRAM - 2x2GB)
and
8GB 1066MHz DDR3 SDRAM - 2x4GB http://Add $600.00
4GB DIMMs are at present significantly more expensive than 2GB DIMMs. It's your choice whether to pay the extra money and have empty slots available for additional future memory expansion (without removing any existing memory).
I presume 2.8GHz Quad-Core Intel i7 is bigger, or more powerful than the 3.33GHz Intel Core 2 Duo of the 21.5” iMac model. Correct?
Generally yes. You can see benchmarks on places like Barefeats if you want to see comparison numbers.
it appears the CD/DVD problem thing is not evident in the 27” model as it at least was in the 21.5” model. Right?
I can't add anything to what I said on the subject previously.
cracked screens upon opening the box of the new computer, were much more of a problem for the bigger, 27” models that the 21.5” models. Hopefully, Apple has taken care of that by packaging them more carefully.
I haven't seen a report of any cracked screens in several weeks now. But with the gorillas the shipping companies tend to use, there are no guarantees. I once received a pallet-load of computers that the trucking company had driven a forklift blade through. So you never know how your computer might arrive. The prevalence of problems seems to have been alleviated, though.
Regards. -
Ive had an idea to solve the memory limitations but need help
Ok ive had a great idea to solve that annoying problem of not being able to use sd cards in iphones but it would require someone able to make an app and someone able to design an acessory to my specifications offering full partnerships to both people contact me if interested
<Email Edited By Host>nobody can help me?
-
IMac kernal panic NEED HELP!
I have a iMac 24" Mid 2007 and its keeps crashing dont know what to do!
NEED HELP!
Wed Jul 30 14:26:55 2014
panic(cpu 0 caller 0xffffff80184efe1b): "new_vnode: vp (0xffffff802542fe88) on RAGE list not marked VLIST_RAGE"@/SourceCache/xnu/xnu-2050.7.9/bsd/vfs/vfs_subr.c:3784
Backtrace (CPU 0), Frame : Return Address
0xffffff80203d3810 : 0xffffff801841d5f6
0xffffff80203d3880 : 0xffffff80184efe1b
0xffffff80203d3940 : 0xffffff80186f1412
0xffffff80203d3a40 : 0xffffff80186f95d2
0xffffff80203d3c60 : 0xffffff8018511634
0xffffff80203d3ca0 : 0xffffff80184eb75c
0xffffff80203d3d20 : 0xffffff80184eb14e
0xffffff80203d3de0 : 0xffffff801850089f
0xffffff80203d3f50 : 0xffffff80187e17da
0xffffff80203d3fb0 : 0xffffff80184cecf3
BSD process name corresponding to current thread: mds
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: iMac7,1 (Mac-F42386C8)
System uptime in nanoseconds: 900478869130
last loaded kext at 364220525728: com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1 (addr 0xffffff7f9a3e1000, size 86016)
last unloaded kext at 451144217735: com.apple.driver.AppleUSBCDC 4.1.21 (addr 0xffffff7f9a3cd000, size 12288)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.ATIRadeonX2000 8.0.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.kext.AMD2600Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0If you have upgraded the RAM, the likely cause is upgraded RAM or some other hardware issue. Sources of RAM caused KP's are:
Failed RAM
Incorrect RAM
Unseated RAM
Start by removing all upgraded RAM and replace with the original RAM the computer shipped with and then test. If they KP's disappear you know your issue is RAM related to the upgraded RAM. -
Unlock iphone - have authorization but need help
I am trying to unlock my iPhone 5 so that I can pass it on to someone else.
I have gone ahead and backed up and restored the phone to factory settings just as a housecleaning step to clean out the phone . After I did that I found out that the phone is going to someone else so I requested unlock authorization from my carrier ATT which I have received.
Here is where I am confused. The instructions in the ATT email to unlock the phone states that I should backup and restore the phone again to factory settings. The problem is when I connect the phone to iTunes on my computer I see different options. The screen is Welcome to Your New Phone and it gives me the option to:
Set the phone us as new
Restore from this backup (which shows my latest backup)
I do not see on this screen the option to backup and I thought I did not want to restore from a backup but needed to select restore iPhone. So basically it seems like I put the carriage in front of the horse. Where do I go from here?Okay, thanks. I selected Set up the phone as new and now see the phone in my Mac iTunes.
One more question, do I still need to backup the phone which will require me to set up the actual phone or can I skip that step and just restore phone? -
K330 Motherboard replaced but need help.
I got the motherboard replaced from the recall. But the problem is the tech did not put in the Model # and serial on the motherboard. Is there any motherboard manuals that might tell me if the specs have been upgraded etc??
From CPU-Z:
DMI BIOS
vendor LENOVO
version DKKT20AUS
date 03/16/2011
DMI System Information
manufacturer LENOVO
product INVALID
version Lenovo Product
serial INVALID
UUID {FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF}
DMI Baseboard
vendor LENOVO
model To be filled by O.E.M.
revision To be filled by O.E.M.
serial INVALID
DMI System Enclosure
manufacturer To Be Filled By O.E.M.
chassis type Desktop
chassis serial INVALID
DMI Processor
manufacturer Intel
model Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
clock speed 3400.0 MHz
FSB speed 100.0 MHz
multiplier 34.0x
DMI Port Connector
designation J1A1 (internal)
designation PS2Mouse (external)
port type Mouse Port
connector PS/2
DMI Port Connector
designation J1A1 (internal)
designation Keyboard (external)
port type Keyboard Port
connector PS/2
DMI Port Connector
designation J2A1 (internal)
designation TV Out (external)
connector Mini Centronics Type-14
DMI Port Connector
designation J2A2A (internal)
designation COM A (external)
port type Serial Port 16550A
connector DB-9 male
DMI Port Connector
designation J2A2B (internal)
designation Video (external)
port type Video Port
connector DB-15 female
DMI Port Connector
designation J3A1 (internal)
designation USB1 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB2 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB3 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J9A1 - TPM HDR (internal)
DMI Port Connector
designation J9C1 - PCIE DOCKING CONN (internal)
DMI Port Connector
designation J2B3 - CPU FAN (internal)
DMI Port Connector
designation J6C2 - EXT HDMI (internal)
DMI Port Connector
designation J3C1 - GMCH FAN (internal)
DMI Port Connector
designation J1D1 - ITP (internal)
DMI Port Connector
designation J9E2 - MDC INTPSR (internal)
DMI Port Connector
designation J9E4 - MDC INTPSR (internal)
DMI Port Connector
designation J9E3 - LPC HOT DOCKING (internal)
DMI Port Connector
designation J9E1 - SCAN MATRIX (internal)
DMI Port Connector
designation J9G1 - LPC SIDE BAND (internal)
DMI Port Connector
designation J8F1 - UNIFIED (internal)
DMI Port Connector
designation J6F1 - LVDS (internal)
DMI Port Connector
designation J2F1 - LAI FAN (internal)
DMI Port Connector
designation J2G1 - GFX VID (internal)
DMI Port Connector
designation J1G6 - AC JACK (internal)
DMI Extension Slot
designation J6B2
type A5
populated yes
DMI Extension Slot
designation J6B1
type A5
populated no
DMI Extension Slot
designation J6D1
type A5
populated no
DMI Extension Slot
designation J7B1
type A5
populated no
DMI Extension Slot
designation J8B4
type A5
populated no
DMI OEM Strings
string[0] DK20A
DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 32768 MBytes
max# of devices 4
DMI Memory Device
designation A1_DIMM0
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM1
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM2
format DIMM
type unknown
total width 64 bits
data width 64 bits
DMI Memory Device
designation A1_DIMM3
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MByteshey skimore,
i would suggest to cross reference with your current setup with this >>
http://www.lenovo.com/psref/pdf/icbook.pdf
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
so i will travel to another state and i will be with my aunt that doesnt have a computer and of course no internet. so i wanted to know if there is any place where i can tranfer music to it. like an apple store? please i need help
It would probably be best to find a family friend who can give you some time on their computer but here's some additional advice. By default the iPod is set to "automatically manage songs and playlists", and it links to a specific computer to update. To use it on multiple computers you need to change the update method to to "manually manage songs and playlists":
Using iPod with Multiple computers
Managing Your Songs Manually
Here are some other useful links if you are new to iPods:
iTunes Fast Start: New User's Guide to iTunes
iPod 101
iPod Higher Learning -
Really, really easy but need help
This question is very easy but I just began java and I need help. I need to write a simple program to display an invoice with item name, number, quantity, and price. I am going to use two classes but I can't figure out how to create instances to make the items display. Can anyone help?
here you go, hope the following code helps
public class InvoiceTest
public static void main(String[] args)
Invoice in = new Invoice("375ml fanta", 1234, 10, 1.5);
System.out.println(in.toString());
public class Invoice
private String itemName;
private int itemNumber;
private int quantity;
private double price;
private double totalPrice;
public Invoice(String name, int num, int qua, double price)
itemName = name;
itemNumber = num;
quantity = qua;
this.price = price;
public String getItemName()
return itemName;
public int getItemNumber()
return itemNumber;
public int getQuantity()
return quantity;
public double getPrice()
return price;
public double getTotalPrice()
totalPrice = (double)(price * quantity);
return totalPrice;
public String toString()
return "invoice detail: \n"
+ "item name: " + getItemName() + "\n"
+ "item number: " + getItemNumber() + "\n"
+ "quantity: " + getQuantity() + "\n"
+ "price:" + getPrice() + "\n"
+ "total price: " + getTotalPrice();
} -
I need a Rich Text Editor so I'm making one but need help.
Hi all,
I'm still figuring out the TLF and how it works so my question might seem dumb to some but any help would be great.
I'm making a RTE because I need access to a TextFlow when the user is done editing the text. It wasn't obviouse that the halo RTE could do that so I'm making my own.
The problem I'm running in to is that a user can select a range of text and apply something like italics to it. But if they don't have a range selected, say for example they just want to start off typing in italics, then how would I do that?
I've tried doing this and it works for a range but not anything else
var textfmt:TextLayoutFormat = rte.getFormatOfRange(null, rte.selectionAnchorPosition, rte.selectionActivePosition);
textfmt.fontStyle = (textfmt.fontStyle == FontPosture.ITALIC) ? FontPosture.NORMAL : FontPosture.ITALIC;
rte.setFormatOfRange(textfmt, rte.selectionAnchorPosition, rte.selectionActivePosition);
I also tried this when there wasn't a range selected and it also didn't work
var f:TextLayoutFormat = new TextLayoutFormat();
f.fontStyle = FontPosture.ITALIC;
IEditManager(rte.textFlow.interactionManager).applyContainerFormat(f);
Any help would be great.
Thanks.Never mind, I did the following and things worked for me.
if (rte.textFlow && rte.textFlow.interactionManager is IEditManager)
var f:TextLayoutFormat = new TextLayoutFormat();
f.fontStyle = (italics.selected) ? FontPosture.ITALIC : FontPosture.NORMAL;
IEditManager(rte.textFlow.interactionManager).applyFormat(f, null, f, null);
If you want to add anything or explain anything I would appreciate that.
Maybe you are looking for
-
How to provide streaming in J2EE web application?
Hi Friends, I want to build web application which will provide streaming of data. This data may be in raw data, binary, files, audio, video etc. As we are using HTTP protocol for web application, then how to do streaming between server and client usi
-
I have been using pages to create a document that I always export in two ways. 1st, I export a single page document that contains all of the data (sometimes this can go as long as 8 1/2 x 50). I have to do this for web purposes. Next, I duplicate
-
RFC Destination contains errors
Hello, I am doing a IDOC - File scenario. for XI : RFC : R3RFC Port : R3PORT LS : XICLNT010 for R3 : LS : CLNT090 RFC : XICLNT100 Port : XI100 When the IDOC was sent, its showing up in green color but when I go to SM58, I see the error messag
-
Deprecated parameter PLSQL_DEBUG
I am compliling a procedure using 11g. I get two warnings: Warning(1): PLW-06013: deprecated parameter PLSQL_DEBUG forces PLSQL_OPTIMIZE_LEVEL <= 1 Warning(1): PLW-06015: parameter PLSQL_DEBUG is deprecated; use PLSQL_OPTIMIZE_LEVER = 1 What does thi
-
How to report a store selling apple products without authorisation
Please help they will not refund after just one week......I've since found out that they are not an authorised reseller..... How do I report them to apple?