I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there.  Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there.  Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later  Command (right) - click on the photo in the search window and select Show Event in the Contextual menu. 
That will take you to the event where the photo is.
OT

Similar Messages

  • I am looking for a (relatively) cost effective virtual news studio that does not look too cartoonish

    I am looking for a (relatively) cost effective virtual news studio that does not look too cartoonish. Can anyone recommend a website or software they have used?
    Any help much appreciated

    I don't know how you would feel about the quality, because I have never actually used one, but there is usualy a free 7 day trial of Video Blocks and they have 100 virtual sets available. You can download as many as 20 per day with the trial. So you have enough time in a week to get them all. But don't forget to check out the music section for your news intro. And some lower thirds.
    https://www.videoblocks.com/freeclips/
    I have to warn you that I got so wrapped up in the site that when they offered a huge discount I took them up on their offer. IIRC it was around $100 for one year instead of ten times that much.

  • I am looking for a english to spanish voice translation app that does not need the internet.

    I am looking for a english to spanish voice translation app that does not need the internet. All the ones I find need the internet which have no value in a rural area. Google makes one for the Android but I need it for the Iphone4s. Thanks Steve

    See How to call Adobe Acrobat 9 APIs to OCR the PDFs through .NET reply 4.

  • Cptiavte 8 - the actions does not appear in proprerties when adding a word search widget - any clues please

    Are  there some bugs in captivate - the properties do not always show timings - is this the same for Actions on a word search widget?

    I understood perfectly your question. There is barely documentation about the learning interactions. I have been presenting last year at DevLearn about them with great success, but this year that presentation (even a workshop would be useful) was declined. And I never see any tutorial about them, no documentation in the Help etc.  Wondering why, because they offer some time saving functionality to make a course more engaging. In my last blog post I showed how the Scrolling TextArea Interaction (as widget it is called TextArea, name that is still visible for the interaction as well???) can be used for a Short Answer question with more functionality than the default one: Custom Short Answer Question - Captivate blog
    There is already the big confusion: why are there Widgets (they still are included) and Learning Interactions that both are pointing to widgets (hence the generic name), just to make the difference between those widgets that are SWF only and those that are compatible also with HTML5 output (the so-called Learning Interactions or Interactions)? Terminology is to say it very diplomatic, bit 'inconsistent'.
    But what I explained in this blog post about Widgets, the 3 categories, is also valid for the Learning Interactions: http://blog.lilybiri.com/using-captivate-widgets-some-tips
    You will see that static widgets cannot trigger Actions! Only the interactive widgets (and question) can do that. It is the same difference that exists for objects: non-interactive objects like text captions, images, cannot have actions attached to them, only the interactive objects (buttons, click boxes, TEB's, shape buttons). There is one hybrid object, the rollover slidelet. The Interaction you are pointing at, Word Search, is a static interaction, which means no actions and thus the Actions tab will not appear!
    Another blog post shows all the events that can trigger an action: Events and (advanced) Actions - Captivate blog
    As for your second question: in Captivate 6 all interactions were pausing at the first frame, and that caused a lot of problems (audio not playing is one of them). For that reason the behavior changed radically from 7  on: now they are not pausing at all. That means thaty you need to insert an interactive object with a pausing point like a button (think about a Next button?), click box, shape button...
    Oh yes, static widgets cannot have score attached to them, there is no real way to check if the WordSearch widget has been used? It is an exception, because the other game interactions have an associated variable, are interactive, can trigger actions and can have a score (but that is another long story).
    Think I have spent already too much time answering, to try to fill in the gaps in the documentation. I could write multiple articles on Interactions, want to provide more information but free things are not considered valuable at all. Why should I bother

  • Looking for a specific title...

    Hi,
    I have been scouring the usual plug-in sources for iMovie looking for a specific kind of title. Since I have not found it, I thought I would describe it here to see if anyone knows if it exists or where I can get it.
    I am looking for a title which scrolls multiple lines of text one at a time to a paused position. i.e.
    Line #1: Scrolls to top of screen and pauses. Remains.
    Line #2: Scrolls to just below line one and pauses. Remains
    Line # 3: Scrolls to just below line two and pauses. etc.
    I am looking for a way to tell a story on one title screen in a sort of dramatic way. I want my viewer to digest the first part of the information and then have the remaining info scroll up. Does that make sense?
    If anyone out there has any clue as to what I am talking about, I'd love to hear from you!
    Thanks,
    Shannon

    I guess I should had stated that I need a laptop no questions asked, I need it to be portable. If an external monitor was an option I may as well get a desktop... I'm aware of laptop's short comings but what I was hoping to gain from this post was information on current models that fulfill decent photo editing specs, in regards to laptops.. not desktop solutions..
    So those expensive models you mentioned would be a good start. Would you mind sharing them with me? I've linked a model I'm pretty interested in, and would like the opinion of the community on it's potential and maybe any other models they know of that can match it.
    Thanks again.
    http://www.engadget.com/2014/06/02/asus-zenbook-nx500-hands-on/#comments

  • I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • Looking for a specific QuickTime player

    Hi,
    I'm looking for a specific QuickTime player. The one that has the interface with round buttons like tear drops and not the flat buttons the we have today. I think it is in version 6 of QuickTime but I'm not sure. If someone could send me only the player. If you need a picture of the buttons, I can send you one...
    Regards,
    Harmonium
    iMac G5   Mac OS X (10.4.4)  

    Well, is controlling Audacious from the tray all that... needed?
    I use Global Hotkeys and have quite a few bindings set up. They work surprisingly well.
    The list as it appears in the hotkey editor window:
    Previous Track: Control + Alt + Prior (PgUp)
    Play: Control + Alt + Return
    Pause/Resume: Pause
    Stop: Control + Alt + End
    Next Tracks: Control + Alt + Next (PgDn)
    Forward 5 seconds: Control + Alt + Right
    Rewind 5 seconds: Control + Alt + Left
    Volume Up: Control + Alt + Up
    Volume Down: Control + Alt + Down
    Pause/Resume: Control + Alt + Insert
    Stop: Control + Shift + F11
    Pause/Resume: Control + Shift + F12
    Next Track: Control + Shift + F10
    Forward 5 seconds: Control + Shift + F6
    Rewind 5 seconds: Control + Shift + F5
    Previous Track: Control + Shift + F9
    Toggle Player Windows: Super + e
    -dav7

  • Looking for a Specific product

    Hello,
    I am looking for a specific Desktop PC. Similar to M73 ThinkCenter in size, but needs to have 3-4x HDMI inputs. This computer will run digital menus for restaurants/coffeeshops 24/7. The M73 has display ports but we are looking to move away from having to buy display ports to just plugging directly into the computer through HDMI.
    Thanks in advance for the info.

    ..... a computer.
    In all seriousness, an HTPC would be the easiest, but there's also Rokus, here's the first one I grabbed.
    http://www.bestbuy.com/site/Roku+-+2+XS+Wireless+Digital+Media+Player/2825032.p?id=1218355858277&sku...
    Now, personally I have no experience with them, but do know they're quite popular.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Looking for a specific transition

    I'm looking for a specific transition - I have an image layer of a credit card, that starts out only showing the thin edge, then flips out to reveal the flat surface of the card. Closest I could find in FC was 3D Spinback.
    Can you recommend a good source of FC transitions, free or paid? One that shows previews would be especially good.

    I thought you might have this issue, and I had meant to point out a problem with your workflow, but it slipped my mind.
    The file you're working with is a .psd, and it contains 1 layer, rather than being a flattened image. So what's happening is that when you drop the file into the Sequence it becomes a Nested Item.
    That's why when you double click it, it opens in its own sequence, constrained to its own dimensions. When you add the basic 3d filter, you are then animating it in that sequence, rather than the main sequence.
    Without going back to Photoshop, the easiest fix is to
    1. Cut the effect from the clip.
    2. Go back to the main sequence and Option Double Click the clip. You are now accessing the master clip, rather than its subclip which is the single .psd layer.
    3. Paste the filter. I believe your keyframed motion will be retained, and the clip will now rotate in the main sequence without cropping.
    4. Remember from here on that to access the filter again you have to Option Double Click the layer.

  • Error R32762: # Error: Error looking for resource specification.  Need 'resource' or 'type'

    I have succesfully ported some of my developments to CS5. I have used the following procedure:
    - create new project by using dollyX
    - add source code
    - fix the errors
    But now I have encountered an error I can't figure out.
    Error 1 error R32762: # Error: Error looking for resource specification.  Need 'resource' or 'type'. C:\Program Files\Adobe\CS5\InDesign Product SDK\source\public\interfaces\architecture\IPMUnknown.h 47
    Any suggestions?
    Im running a windows7 machine, visual studio 2008

    Pectora:
       First of all, I'm assuming that you are receiving this error on a Win box.  If on a Mac, then your problems may stem from something else altogether.
       It's a bit complex to cover in an email.  My recommendation is that you open up a couple of the sample plugins and look at them.  Pay close attention to the Properties page of the project.  Look at the Resources field and command line, and also pay attention to the Pre-Link and Post-build fields.  Once they are looking right, highlight your .FR file and click the Properties icon.  Be sure that all four lines have something in them. Model their input after what you see in the sample plugins.
       Finally, are you getting this error when the ODFRC compiler is running, or when the project is getting linked?  The former could indicate a problem with your .FR file, the latter is more likely to be solved by my first suggestion.
    R,
    John

  • We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file.  We are hosting our images in SharePoint and need the design file to retain it's links, no matter

    We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file.  We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.

    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. HELP!!

    Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
    Is there some way I can open these pictures on my Mac? They work fine on a PC.

    Thanks for your reply.
    The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
    The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    Hi T,
    Either of these will give you the info you seek:
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html

  • Error:  The local root folder, ZZZZZZ, does not exist.  Please...

    Dreamweaver newest - Cloud
    Windows 7 Prof 64b SP1
    Everyday now upon firing up Dreamweaver I am getting the same error. As long as I worked on this certain site last the day before, dreamweaver of course tries to load that site upon the next startup.
    The error:  The local root folder, ZZZZZZ, does not exist.  Please choose a new local root folder
    I have typed the path myself and browsed to it many times.  When I go into the Site manager/edit site to correct this, it already has the correct path listed there.  If I just leave what is there and hit save, it doesn't work.  Once re entering is done it allows me to work on the site again. Connecting to remote/upload files and everything works fine.  I can close DW and reopen and all will be fine, for a while.    If I close it and maybe two hours later come back to work on it, DW will report that same error again on startup.
    Other editors of the site with same cloud version of DW and same site settings are not having this error. We've combed for differences.
    I've deleted the site definition altogether and recreated it.  It does not stop the error.
    I found some old references to this issue in the old macromedia forums dealing with Mac and spaces or odd characters being an issue in the local folder path. I'm on windows, but the complaints sounded so similar I decided to try a test suggested there.  Their suggestion was to create a new blank html file, without saving, add some text, select the text, use the link icon in the properties manager to drag a link out to any file in the files panel.  Upon doing so, DW creates a full local path that you can see in your html since you haven't saved the file yet.  The suggestors of this test said you should see if your "mac" and DW was having trouble with spaces or odd characters in the path.   Well the following path shows a PIPE character being created in the path by DW on my test page. 
    file:///W|/private/09 Websites/zzzzzz/index.html
    Could this be showing there is some kind of issue that I need to correct?  Or is this typical?  See the pipe character being listed after the network drive letter of W
    Our local root folder path:
    W:\private\09 Websites\zzzzzz\
    Server Settings:
         Root Directory:
    public_html/zzzzzz.com/
         Web URL:
    HypertextTransferProtocolCOLON//worldwideweb.zzzzzz.commercial/
    Any help or suggestions would be appreciated.

    Sudarshan Thiagarajan wrote:
    remote
    /home/zzzzz/public_html/zzzzz.com
    Is this how your remote setting is defined? If it is, do you have a folder called zzzzz.com on your remote server trailing public_html? Ideally public_html is your website root - index.html resides within that, unless your configuration states otherwise.
    To come to your actual question of the local root folder, yes, your file manager wont show files if the connection fails. However, accessing it depends on the permissions you have on your network drive. Have you checked that?
    I'm not sure why our guy has another folder underneath public_html. My guess is he has some company related hosted test folders for various things under there.  I can see a couple other folders under public_html while checking with filezilla. I suppose he just directed our domain to our web folder under public_html. 
    Again, two others here are using these exact same settings with no root folder errors from DW. We've checked many times and all is the same for them.
      Here are some screen grabs of the settings if this makes it more clear.
    This last one showing the remote connection address under the files/assets panel is the one that looks strange to me.  It shows a home folder / then a folder with our site name / then public_html / then our sitename.com .    Seems convoluted to me.  But it works for everyone else so I'm not sure if this error I'm getting has anything to do with these settings or if there is just some old DW settings file hung up in my system that I need to find and delete or what.
    Thanks for any ideas.

Maybe you are looking for