I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???
I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???
Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.
Similar Messages
-
I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?
Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards. -
When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?
What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.
-
Thanks in advance..apple newbie here. Have 12 photos/videos on camera roll, but only 3 appear on photostream (which is on), how do i get the rest over so that i can see them on apple tv. thx so much
FAQ photo stream http://support.apple.com/kb/HT4486
-
hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys
- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again. -
hi im using 4s and when i try to download apps its asking my credit card details. can any one please help me
even when you are dowloading free app Apple needs to check that you have valid billing details but you will not be billed for downloading of free apps. Go to settings/itunes & app store tap on ID there log in and check acocunt details there
-
My ipod froze during facebook and now the screen han gone white and i cannot do anything.
- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order. -
Can any one please help me resolving the following error while accessing online lync meeting portal
When I am try to access the Join
Online Meeting link in a meeting portal in Lync Online, I am receiving the above of the following error messages in Microsoft Internet Explorer or Chrome browser.
Can any one please suggest me how to overcome this issue.
Thanks in advance
Kiran MarriHi,
Did the issue happen only for you or for multiple users?
You will need a valid conference for the URL to work. Please check if you did any typo for the URL. For example, in the format:
https://meet.contoso.com/username/confID
You can try to schedule a new conference from Outlook, check if the full URL like the example above and try to use this URL to join meeting.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
How to remove photos from camera roll but remain in album?
I want to delete photos that I have in camera roll but those same pics to remain in the album I create before. Any suggestions?
You can't. When you 'copy' them into new albums you are effectively just creating pointers to the original photos, so if you delete the original photo you will also be deleting all pointers to it.
You could copy the photos to your computer, organise them on there, and then sync them back. -
Getting an error while accessing the Datasource tab through Endeca workbench "CAS Console must be accessed through Workbench". Verified both ws-extensions.xml and casconsole.properties files which exists under %ENDECA_TOOLS_CONF%/conf, both files shares the same sharedSecret. Do anybody knows how to resolve this issue.
I did tried to reinstall CAS component multiple time , all the time the same error throwing.
Endeca CAS service is also not able to start through microsoft console (services.msc) throwing an error " Windows could not start the Endeca CAS Service service on Local Computer"This can occur if CAS is reinstalled. Check your ws-extensions.xml and casconsole.properties files, and ensure that they agree on the same shared-secret.
Best
Brett -
Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.
You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
my i pad has all the data and media deleted, it now shows me a diagram for connection to i tunes, I have visited i tunes but cannot find anywhere, that tells me to download to reinstall for my i pad can any one help me?
You need to restore your iPad from iTunes. This assumes that you have a backup of your iPad either in iTunes or iCloud.
Start iTunes.
Plug in your iPad using the USB cable.
Click on the iPad in the left hand column under "Devices".
In the "Summary" tab, there are options to Back up, Update and Restore.
Choose Restore and let it run.
http://support.apple.com/kb/HT1414 -
I have mac book pro, 15inch server color, 2008 modal, few days before I was watching movie at the same time I was chating on face book, suddenly my mac stuck so I just tried to force shutdown, by pressing shadown key for 7sec, and after I try to turn on, but nothing comes on display it's black ad if it's off, but laptop fan is on the led is on its heat is as if it's working, after I tried to reset then it's started making beep noses for ten times and again same thing nothing comes on display black, but sounds like fan is on and led blink, please help me
Hi Aparana.rahul,
The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
OS X Mavericks: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH14206
Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
Thanks for using Apple Support Communities.
Best,
Brett L -
help
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I just bought a 50 dollar iTunes card but now it's asking for my security questions and I have no clue what those are please help I'm begging
See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
Maybe you are looking for
-
Control delivery type for mvt type 313
Hi Regarding SLOC to SLOC transfer postings, I have a couple of questions: Using movement type 313 (unr. use stock SLOC to SLOC) in our SAP system automatically creates a delivery in the background. Where can I configure what delivery type I would li
-
Hi, Im executing RSEOUT00 to process all outbound idocs with status 30. The problem is if I only have one idoc to be processed, the status remains 30 while if I have for example 5 outbound idocs, all idocs EXCEPT the last are processed. Processed Ido
-
Hi All, I have created a Parameter transaction for SM30 by which I am able to maintain entries in my user-defined table. But, I would like to restrict the entries displayed (not using the conditions in SM30) by creating the selection screen where onl
-
SetWhereClause not working for standard view object
Hi All, We are trying to customize one standard page and for that we have add extra where conditions in the standard view object. In th standard view object query is null which is actually getting executed in vo impl using setQuery as follows: Please
-
Yes, i know it is unsupported, but has anybody tried to run Solaris x86 in Oracle VM? Thanks