I am not able to link/thread a text to another existing, empty textbox, instead it creates a completely new block with the width of the grid layout i set up.
Hello,
i can not link/thread two existing textboxes together when they are placed on my document. As soon as I move them to the side around the bleeding area, i get the normal chain-like link symbol. I tried to set the grid to the background, lock the guides and these things, but nothing helps. What am i overlooking here?
Thanks for the help.
Thank you for your detailed answer.
However, this is sadly not the solution in my Case. I just tried again and deleted not only the guidelines, i even set the created columns to 0. That way there is just my margin left, and i still cannot select the text box. I don't understand this behavior.
I'm also pretty sure, that in the beginning this was still possible. I work with the guides showing and set up text frame the way before. But at some point, it was no longer possible. I already reset the indesign defaults, deleted all pages/content and saved it as a new file – still the same behaviour.
And I just found out, what was causing the Problem myself! I made a rectangle on a separate Layer (above all), which hat an inwards stroke (see image below, it was white, but sometimes used as a coloured border around the page). This Object is causing the problem, but I am not exactly sure why. If the Object itself was the problem (but its on a master page, therefore locked) and thus recognized as clicked, the text should be inserted into its shape, i would suppose? Anyway, this is what is causing the problem.
Once this Object is removed, it works as usual.
Nonetheless, thank you for the kind help!
Best regards
Similar Messages
-
I could not download Control Panel 3.0 for my windows it is showing Please find the prnt scr link
http://prntscr.com/1siqce <<<<<<<<<,,Paste this in address BarThe version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.
-
I have an IMAC 10.6.8
Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site. Do I need to purchase the complete one?If you have iWeb V 3 you need to go to the Site Publishing Settings page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once -
I have a Iphone 4, upgraded to ios 5 with itunes 10.5 Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone. I get a grey listing of the song and the sync symbo but it is not moving. Nothing appears on my phone screen. So not able to add music to my phone and its driving me nuts.....
iOS 7 requires iTunes 11.1.
-
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes.
I think there is some issue with tunes new version .kindly support ASAP.
Rachna khanna
[email protected]you might need to buy a new cable from the apple store.
-
I have just purchased the new iPad with the camera connection kit. I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how? Please advise. Thank you.
See this article: iPad: Using the iPad Camera Connection Kit
No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
Regards
Léonie -
Please add the option to be able to upload/link new pdfs with the in-browser editing. I have a restaurant client who is constantly updating their menu! Please help so they can do this themselves!
Thank you so much for your help! I am so relieved. I will have explain how to do this to my client, but a big weight is off my back!
A long learning process and actually such an easy fix. So glad you responded. Again thank you... -
Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.
Go into your contacts and edit them.
-
As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?
Have tried suggestions from here and elsewhere but scrolling not working for me (in Word only!) on magic mouse or trackpad.
MS Word for Mac 2011 (V14.4.6) with Yosemite (V10.10) -
I am not able to install asphalt 8 on ios 7 ipad retina display. I am downloading it directly but on the install process it is stuck.
Try rebooting your iPad by holding down the power and home buttons simultaneously until a blank screen with the Apple logo appears. Ignore the power off slider if it appears. After a while your device should go to the main screen, as if you're turning the iPad on. Don't worry, this won't do anything to your data, it just literally restarts the iPad.
-
I have an iPad 3 or the new iPad with the normal charger.. my iPad is not starting is there any way to format it? if not will the apple guys be able to access my data?
Honestly, I don't think that they have any other way of accessing anything on the iPad than any other user has. The Apple Store genius will just put the device through the standard troubleshooting steps - in your case probably try to restore the device to factory settings and if that doesn't work, then they will make some sort of offer for a replacement assuming that your iPad is still under warranty.
If I'm not mistaken they will probably erase the device in order to try to "fix" it. That's what restoring to factory settings does. I assumed that you were concerned about losing data - but if you are concerned that they are going to see something that you don't want them to see or access, I'm pretty sure that's not going to happen. -
why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Hi so I forgot my bbid password and answer to security question so Im stuck now..please RIM really this is poor that you dont have a sytem to reset it without those two things I see hundreds of posts all over google with people with this problem so if there is a way let me know but as you can see in the subject that's my question if it's not possible to reset it without security queston answer
Regards
GarryIt is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
Your choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Is there a way to create netcdf files in labview?
I am looking for a way to create Netcdf files in labview rather than having to go through the pains of creating them in C++ and calling that from labview.
-
I have a brand new mac book pro and suddenly I have a pixelated huge red diamond that showed up centered on my desktop. What is it and how do I get rid of it.
-
How to use Toolkit.getDefaultToolkit().getImage in JPanel in Java Swing
Hi Sir, I want to know how to use Toolkit.getDefaultToolkit.getImage() in JPanel (ie) the class that extends the JPanel.There is no problem to include the Toolkit.getDefaultToolkit.getImage()in JFrame.It is displaying it without any problem.But in JP
-
Compatible Unit Software Component in SAP Enhancemant Pack 2
Hi All, Can anyone pls tell me Which software component I need to apply for Compatible Unit (CU) ? Which are are the files I need to deploy ? I want to install CU in our ECC 6.0 environment. What are the pre-requisites for that ? Thanks and warm rega
-
Blocking a member of a group does not hide their m...
I'm part of a big community skype group of about 30+ people with about 3-4 people blocked because I did not want to see their messages anymore. Blocking them does not do anything - I can still see their messages and they can also see mine. It would b