I am not able to print in cannon ir series 2520 after Maverick update

I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
Same case with the projector not able to connect it.

The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

Similar Messages

I cannot print to my Canon iR C2880i after Mavericks update

I am no longer able to print to the office Canon iR C2880i after I updated to Mavericks. I am able to ping the printer using Network Utility. It says my driver version is 1.0. I know it needs to be something else, but I cannot figure it out. Please help.

nathan.gumbiner wrote:
It says my driver version is 1.0.
This would suggest you are using the Generic Postscript driver included with Mavericks. If your iR C2880 does not have the optional Postscript printer kit installed then it will not print. So download and install the UFR2 v10.3.0 driver.
Note that when you create the printer, ensure you select either the Line Printer Daemon-LPD or HP Jetdirect-Socket protocols. IPP is not supported by the either the Canon PS or UFR2 driver.

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

Not able to print purchase order..

Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
Naren

Hi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi

Not able to print on Purchase order whatever we fill in item text

not able to print on Purchase order whatever we fill in item text, from where can we link to get printed item text on purchase order

while doing in quality whatever we fill in text in item details of p.o we are getting it printed on p.order
but same thing when we are doing in production we are not able to print on purchase order. where we should look out
for e.g in spro-mm-purchasing-purchase order..

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print anything on ATG Rest webservices

Hi..I am new to ATG Rest.. Just for the heads up, i followed following steps :-
1 ) Added rest module to MANIFEST.MF
2) Created a custom class which looks like this -
package com.sgs.utils;
import atg.nucleus.GenericService;
public class SGSdummy extends GenericService {
public void dummy() throws Exception {
 logDebug("sdbfhj");
3) Mapped it to the property file -
$class=com.sgs.utils.SGSdummy
$scope=global
loggingInfo=true
4) Configured the security for above component in restSecurityConfiguration.xml
<rest-security>
<resource component="/atg/commerce/order/dummy" secure="false">

<method name="dummy" secure="false"/>
</resource>
</rest-security>
I commented acl as i really didn't need it for a POC plus it was throwing 401 unauthorized.
5) Now I am calling it from chrome's Advanced Rest Client. However, status is 200 OK but I am not able to print a logDebug or sysout in my SGSdummy class.
 When i check console, it says "Depth 0 is greater than maximum depth 0"
 I tried to change maxDepthAllowed in configuration.properties but in vain..I need help to proceed.

Now I am trying to create a REST request using custom client. I believe it should be a POST request as I am trying to call a method. My custom client looks like this :-
package atg.rest.client;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestDemoClient {
/** The m username. */
private String mUsername;
/** The m password. */
private String mPassword;
/** The m host. */
private String mHost;
/** The m port. */
private int mPort;
/** The m session. */
private RestSession mSession = null;
 * Instantiates a new method call by rest.
public RestDemoClient() {
 * Execute.
 * @throws RestClientException the rest client exception
private void execute() {
 mSession = RestSession
 .createSession(mHost, mPort, mUsername, mPassword);
 mSession.setUseHttpsForLogin(false);
 Map<String,Object> params = new HashMap<String,Object>();
 params.put("atg-rest-input", "json");
 RestResult result = null;
 try {
 result = RestComponentHelper.executeMethod("/atg/rest/SGSdummy", "addOrder", new
 Object[] {}, params, mSession);
 } catch (RestClientException e1) {
 System.out.println(e1);
 try {
 if (result != null && result.getResponseCode() == 200) {
 System.out.println("Executed Successfully.");
 } else {
 System.out
 .println("Error while execution : Error Code ["
 + result.getResponseCode()
 + "] and Message ["
 + result.getResponseMessage() + "]");
 } catch (IOException e) {
 System.out.println("Error while execution Successfully.");
 * @param args
public static void main(String[] args) {
 RestDemoClient stepUtils = new RestDemoClient();
 stepUtils.mUsername = "admin";
 stepUtils.mPassword = "admin";
 stepUtils.mHost = "localhost";
 stepUtils.mPort = 8080;
 stepUtils.execute();
But everytime i execute this, I get following exception :-
atg.rest.client.RestClientException: java.io.IOException: Unauthorized Server returned HTTP response code: 401 for URL: http://localhost:8080/rest/bean/atg/rest/SGSdummy/addOrder
Exception in thread "main" java.lang.NullPointerException
at atg.rest.client.RestDemoClient.execute(RestDemoClient.java:64)
at atg.rest.client.RestDemoClient.main(RestDemoClient.java:82)
I tried different set of credentials but nothing seems to work out for me.
However it always works fine for GET requests. I am able to see status as 200 OK but it never hits my addOrder() method in SGSdummy class, hence I am not able to print sysout in that method. For status 200 OK GET requests, my logs say "[JSONOutputCustomizer] Depth 0 is greater than maximum depth 0. Outputting object of class java.lang.String as string rather than continuing to nest."
Can you give me some pointers how to run it without any errors plus it should print a random sysout in my custom class. Thanks

Not able to print multiple copies

Hi All,
We are not able to print multiple copies on network printer having device type HP LaserJet2430 even though we are giving no. of copies as 3 or 4 while creating spool request.
Please help me to solve this issue.
OS - windows.
SAP 4.7 EE
Thanks in Advance,
Basis Admin

Hi,
Give one test print from OS Level mostly, this will be problem in printer configuration
Regards,
Ramesh.B

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

I am not able to print in cannon ir series 2520 after Maverick update

Similar Messages

Maybe you are looking for