I am not getting Business System into my Integration Directory.

Hi All!
   This is satish, <b>I created Business system in SLD. How to get them in Integration Directory.</b>Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

Similar Messages

  • No Business Systems refresh in Integration Directory

    Hello,
    I'm working with an installation of XI NW 7.0 SR3 ABAP+JAVA on Windows
    MSSQLServer.
    I've created many outbound and inbound interfaces and imported idocs
    too in a specific software component.
    I've imported the busines system linked to the software componed in
    Integration Directory but it didn't contain the I/O interfaces nor
    imported idocs.
    Result of this is that when I try to use Condition in Interface
    Determination this error occured:
    Problem loading Schema Description.
    Message interface does not exist in any software components installed
    on this business system.
    Can you help me?
    Thanks a lot,
    Fabrizio

    Hi,
    If you get the following msg while selecting the BS in Receiver Determination
    "Message interface does not exist in any software components installed on this business system"
    1) Open ID-----Double click on Business system that which u are using in the scenario
    2) Check whether you are able to see the SWC in the Othere attributes TAB
    3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
    4) Click on Installed Products TAB
    5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
    6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
    7) Click on Installed products and Check the check box of your Product and then finally save that.
    Now you should be able to see the SWC in the Othere attributes TAB in ID
    Regards
    Seshagiri

  • Business system into xml format

    Hi all,
               Can u please explain hoe to convert business system into xml format.
    Thanks in advance
    Naveen

    Hey
    you dont convert business system name in XML format,
    do you want to use ur business system name in message mapping?if yes,then use the following UDF code to get BS name in message mapping
    String Sender = "";
    String key = "SenderService";
    // get runtime constant map
    map = container.getTransformationParameters();
    // get value of header field by using variable key
    Sender = (String) map.get(key);
    return Sender;
    Note: the above code is from the following thread
    Fetching the business system name during graphical mapping
    Thanx
    Ahmad
    Message was edited by:
            Ahmad

  • Importing new business systems into Integration Directory PI 7.1

    Team SDN,
    Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version).  There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
    Please share with members if wht are the new changes in PI 7.1 work proceses  like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
    Thanks SDN.

    Hi Madhu,
    If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
    refer below link..
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Raj

  • The business system HRK_005 is not a business system in the group assigned

    Hi there,
    i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
    In this Szenario, there are XI and HR Systems included.
    On Consolidation Side:
    XIK_001
    HRK_005
    in Prod
    XIP_001
    HRP_001
    When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
    The business system HRK_005 is not a business system in the group assigned to production.
    I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
    Can someone help here?
    Thanks
    Bjoern

    Oops i spoke with u r key code it bounced back .
    Well i explained standard way to export and import Intergration Directory objects.
    K - Development System ( SLD_Dev)
    P - Production System (SLD _Prod)
    In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
    IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
    Assign all BS of K to Group1
    Assign all BS of P tp Group2
    For BS of K specify the target transport as Production BS (P).
    Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
    Now export from K (Dev) to P(prod)
    am not able to view the link provided.
    Any ways i have listed standard way for transport, hope this helps
    Srini

  • How to add business systems into DIRECTORY?

    Hi,
    I have problem to add business system into Business Systems list in my scenarion in the Integration Directory. These systems are already in the SLD, but when I try to assign a business system, I have only choice to assign XI...
    How to solve this problem?
    Thanx 4 answers!
    Peter

    hi Peter,
    maybe your business systems are already inside ID?
    BTW
    did you assign you business system to a correct
    integration server? (when definig the business system)
    also remember to refresh SLD data cache from ID
    - environment
    - clear SLD data cache
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • I am not getting any system in User Mapping..............

    Hi,
    I have created one user... But in my user
    Personalize > User Mapping > System drop down list i am not getting any systems....
    How can i solve this problem..
    please help me...
    Best Regards
    Ravi Shankar B

    Hai ravi,
                     After navigating from User Admin to User Mapping,
    In the Search , enter your userId and search it in Users.
    Your User Id will be displayed in the Table  With Edit Link.
    Now check the drop down List box at the right.
    Your System will be displayed.
    Before doing user mapping , Make sure that you have created system properly and gave all Connector and User Management Property Entries and Created System Aliases.
    Hope This Helps. Award Points if u find this use ful.
    Regards,
    Eben

  • Registration of Business system for the Integration Engine Java in the SLD issue

    Hi,
    We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
    - Configuration Wizard: PI-AEX initial setup
    - Configuration Wizard: PI Self Test for AEX
    However when we were Checking the AEX Configuration as per help.sap.com
    Check the registration of a business system for the Integration Engine Java in the SLD:
        Enter https://<host>:<port>/sld .
        Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
        The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
    More information: SAP Note 1435392
    for us the Pipeline URL is as below
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    and the rest " ?ximessage=true "  is not there.
    Also we ran the below wizard
    Configuration Wizard: PI Self Test for AEX
    and it finished successfully without any issue.
    Any Suggestions what could be missing.
    Thanks,
    Regard
    Ahmed Mohammed

    Hi,
    I found the below SAPNOTE which confirms that the Pipeline URL should be
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
    However on help.sap.com it is different.
    Any one experienced the same ?
    Regards
    Ahmed Mohammed

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • SLD:  recreate deleted Business System of type Integration Server

    Hi,
    accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
    "Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
    Any ideas to create such a business system?
    The old one isn't there in the list, after i deleted it.
    regards,
    ms

    Hi,
    If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
    Maintaining a Business System for the Integration Server
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    Regarding Integration server in Business System  
    Regarding Integration server in Business System
    Refer editing the Business System
    http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
    Thanks
    Swarup
    Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • Problem by Maintaining a Business System for the Integration Server

    Hi to all,
    I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
    Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
    Since than I’m receiving the following error message when I try to refresh my adapter engine cache:
    com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
    Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
    I’ve also checked the IS URL (TR: SXMB_MONI) and it seems that it’s ok. 
    Regards
    Naycho

    Hi Naycho,
    i think you have to clean up some sld rubbish
    Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side  "business system". Delete all entries you find for your business system, after that try to recreate it.
    Regards,
    Udo

  • Basis: No service for system , client  in Integration Directory??

    Hi All,
    IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client  in Integration Directory.  Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
    Because I have checked
    1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
    2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
    But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
    3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
    4) Did SLDCHECK from PI QA, works fine, no problems here
    Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
    How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
    Thank You,
    Indrasena Janga

    *I have trobleshooted  a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
    Thanks,
    Varada Reddy

  • Unable to Load the Integration scenario into the Integration directory

    Hi All,
    I am new to using SAP XI.
    Require your help on the following issue.
    I have built an Integration scenario, added Component  Type: Product Version, inserted actions and connections.
    I did check for any errors. I found no errors.
    When I am trying to load this scenario into the  Integration directory its not showing up the scenario in the popup.
    Navigation:
    Directory > tools> Transfer scenario from repository
    The status of Integration Scenario in the builder shows as
    "Being processed".
    I created the scenario 2 days back.
    Can some one help me in this? 
    Regards,
    Meher

    Hi All,
    Thanks to all who helped me.
    michal,divija : Can you please let me know in details how to activate Business Scenario?
    I did not create any business process.
    Sridhar: I did releases some locks on my process, no luck.
    Can you please explain me in more details?
    Should I have a process build for my Integration scenario to be activated?
    Thanks,
    Meher

  • Business Systems into ID

    Dear All,
    Could anyone please let me know how to import business systems Created in SLD into ID.
    one more clarification.
    if i add new business system to my existing landscape and i want to import to my ID, will it effect my existing scenarios which are already running.
    if i want to achieve above requirement ...please guide how to do this
    Anticipation of your Early response
    Regards,
    VJ

    Hi,
    1.create a scenario,
    2.Right click on Busyness system adn click assain busyness system.
    3.It will show a wizard hear click u r Created Busyness System in SLD and uncheck automatically genarated cc
    4.Click Finish.
    By follow this steps a Busyness system in ID created from SLD..
    It will not effect by adding another busyness system...
    Plw award points
    thanq

Maybe you are looking for

  • Shared Data Source with prompted credentials - errors out.

    Using Data Tools (VS 2010) to build report. Have built a simple report while trying to diagnose this issue.  This report is created in a project that was originally built in BIDS2008 and migrated to Data Tools 2010.  This project contains an original

  • How do I get the feature to restrict a search to Australian websites please?

    I recently upgraded to Firefox 4 .0 and in the process I lost the option to search either world-wide or 'Australian websites only' which previously used to appear in the centre of the page. Also now I have to go to the top right of the page in the se

  • Error in Infopath document merger, post upgrading to sharepoint 2013

    Hi all, Post upgradation of sharepoint portal to 2013, infopath document merger is not working for a portal. Assuming the error or compatibility issue with earlier infopath template 2007, created the new template; still error persists. Attaching here

  • Processing overdue issue

    Hi All, we are facing an issue while loading data to PSA from R/3. There is huge amount of data getting extracted from R/3, But after some 20 datapackages are extracted the load gets fail and the error occured is Processing overdue. when we see in th

  • SAP Portal Network Sizing.

    Hi Friends, We are implementing SAP Portal for ESS/MSS. We would like to know whether, we have required computer network resources or not. How we can check whether we have enough bandwidth that SAP Portal would need. Please advise how we can check ex