I am not Getting emails when i schedule the Report.

Hi All,
When i Schedule the Report in obiee 11g i am Getting Alerts Successfully but am not getting Mail.
When i Schedule the Publisher i am getting mails.
ERROR Details:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 2 of 3
AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
Exceeded number of SMTP delivery retries.
Thanks and Regards
Kiran Kumar

Hi All,
I got the answer and it worked for me:-
1. If the BI Scheduler cannot ping the mail server specified in the scheduler configuration, check the correct server is specified. If it is, check that it is up and running.
2. If the user name and password are specified in the scheduler configuration, log in to Enterprise Manager and navigate to:
Weblogic Domain
Right click on bifoundation_domain > Security > Credentials
Expand oracle.bi.enterprise
Highlight mail.server and delete the user name and password..
Thanks & regards
Nitin Aggarwal

Similar Messages

  • We are not getting email for any of the two new profiles in Production environment

    We are not getting email for any of the two new profiles.
    The new rules for sending e-mail work when using the initial profile.
    Only works for F9 and choose manually the profile is being sent.
    But siebel writes the log of both the \ BIN \ sent as if it had sent.
    operation:
    Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

    The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent. 
    -Are you using Static- or Dynamic Port?
    Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
    instances in the Group Hub.
    If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
    Morten la Cour

  • List of values apprear for email alert while scheduling the report

    List of values apprear for email alert while scheduling the report

    Hi,
    Can you please expand on your issue?
    Cheryl

  • Phone only gets emails when i access the internet using opera mini or google maps

    at first, i thought the problem was related to gmail and pop, so i forwarded all emails to my bb address, but the problem still remains. if i start google maps and let it load for a second, all of my emails and facebook notifications will come through at the same time, but they wont show up on their own. any suggestions? i am using sprint

    So you're not getting any data transfer to device, except when Google Maps is running?

  • SOA_INFRA application not getting initialized when I start the soa_server

    Hi,
    I have created a Weblogic Domain, with SOA server and BAM server. After starting the Admin Server, when I start the Managed Server (soa_server). I get the following exception in the console:
    <Jan 21, 2011 8:38:09 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initia
    ize the application 'soa-infra' due to error java.lang.ClassNotFoundException:
    avax.wsdl.WSDLException.
    java.lang.ClassNotFoundException: javax.wsdl.WSDLException
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.wsdl.WSDLException
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    Truncated. see log file for complete stacktrace
    >
    Though the soa_server is up and running I do not see the SOA tree structure of Farm_<domain_name> from the EM.
    Please advice as to what can be done to get the library having WSDLException class or is it someother problem ?

    Make sure that you have installed SOA 11.1.1.3.0 on Weblogic 10.3.3
    Post the version of softwares you have installed, here?
    Regards,
    Anuj

  • HT2648 I want to Repair Disk Permissions, but I do not have disk utility 10.4.3 on my Mac os X. How do I download it? Why did I not get it when I purchased the computer 2 years ago?

    I am having frequent pop-up boxes. It is very annoying. It was suggested that I repair permissions, but when I try, my 2 year old computer. with OSX operating systems has an old desk utility, and I cannot use it. How do I acquire disk utility 10.4.3?

    Any reason why you have not updated to the final version 10.4.11 of Tiger?
    General advice on updating Tiger:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here:  http://support.apple.com/kb/DL170
    And for Intel Macs here:  http://support.apple.com/kb/DL172
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here:  http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    [b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Not getting email alerts on new meetings

    I have recently installed a new Mail Account as an MS Exchange sever account. I have an ICAL exchange account as well. The issue is I am not getting emails when someone sets an appointment - but I do get notifications in ICAL. I have set a card as "my card" in address book. Any help on what else to do would be greatly appreciated.
    Thanks

    Are you using Mac Mail?
    If so, you also have to have the account set up in MM that the ical events are being sent to. You also need to go into your mail preferences and set the ical invites to automatically dump invites into your ical to "never" if you want an actual email invitation.
    Though, I'm not seeing an issue with just viewing your notifications in iCal only, you know, to bypass duplicate invites...

  • Tried syncing entire music library to ipod but some albums were skipped.  tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

    I tried syncing entire music library to ipod.  some albums were skipped.  tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod?  the album is imported and not purchased thru itunes store.

    Does it play in iTunes on the computer? What is the format of the album?
    Right click and select Get Info. Look under File in iTunes 12

  • Change the Locale settings when scheduling the report with an Excel format?

    Hi,
    My reports have been scheduled with Excel format, however, when the report is viewed in Excel, the date fields are in the format "mm/dd/yyyy" i.e. English(United States) and they need to be in the format "dd/mm/yyyy" i.e. English (Ireland).
    I am wondering if there is any way to change the Locale settings within Business Objects?
    For the time being users have been advised to manually change the format within excel, however, this is not the preferred option.
    Any ideas?

    Hi,
    Thanks for the reply.
    The cell format is set as "Date dd/mm/yyyy" but it still runs as an Excel doc with the format mm/dd/yyyy.
    When I schedule the report to run as a Web Intelligence document and then manually export it to Excel, the Date format is correct i.e. dd/mm/yyyy.
    Any more ideas?
    Regards.

  • BI Publisher: Issue while scheduling the report/query to be executed daily

    Hi,
    We are using Oracle Business Intelligence 11.1.1.6.3 and while we schedule a report(RTF Template) we are facing issue.We use bursting query and when we select option to execute immediately it runs fine and sends notifications,it also executes when we schedule it to run Once but fails when i schedule the report to be executed DAILY .

    hii
    The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
    there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
    But if query is not restricted with  any value for that info object then query executes with in a second.
    Thanks
    neha

  • When I had my old blackberry connected to my computer, all incoming emails were routed to my outlook so I did not get mails on my blackberry.  How do I get it so my iphone4 does not receive emails when connected to my computer?

    I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer.  My old blackberry had an app that took care of this which worked really well.  Am wondering if I can do the same with my iphone4.

    Blackberries were/are able to do that with some types of e-mail accounts because the mail is routed to an intermediary (BlackBerry Service).
    There is no equivalent for the iPhone as the phone communicates directly with the mail servers and does not go through a 3rd party.

  • Component is not getting displayed in process scheduler menu

    Hi All,
    I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
    I have registered this component with below details:
    Menu Name : PROCESS_SCHEDULER
    Bar Name : PROCESS
    Folder Name as PT_PROCESS_SCHEDULER
    Select “Always Use default local node?” Check box
    Permission List : PTPT1000
    But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
    I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

    Thanks Michel,
    I got this problem resolved. Here is what I did:
    Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
    Cleared browser cache, accessed the page again and saw the link was available.

  • Shared Reminders: How do I stop getting emails when changes are made?

    My wife and I both have iPhone 5's that we bought 2 weeks ago. We are sharing a calendar and a "Grocery" list in reminders. I have everything set up where it is working properly but I keep getting emails when a change is made to the grocery list. I don't get emails when there are changes to the calendar.
    I want to stop getting emails when there are changes made to our grocery list but I am not sure how to do it. We both have icloud accounts and we both have checked the box under preferences in my calendar for "in app notifications" for icloud invitations. When I open Reminders in icloud I don't see a preferences for reminders.
    If it helps , or makes any difference, my wife has a yahoo mail account and I have a hotmail account. She does not get emails about changes being made.
    thanks

    Did you try to switch Push "off" and fetch to "manually"? This way no mail is delivered until you choose to open the mail app. The moment you open Mail on your device, your mail account will be checked and if any, mail will be delivered.
    Fetch New Data
    This setting lets you turn Push on or off for MobileMe, Microsoft Exchange, Yahoo!, and any other push accounts on iPhone. Push accounts deliver new information to iPhone whenever new information appears on the server (some delays may occur). You might want to turn Push off to suspend delivery of email and other information, or to conserve battery life.
    When Push is off, and with accounts that don’t support push, data can still be fetched—that is, iPhone can check with the server and see if new information is available. Use the Fetch New Data setting to determine how often data is requested. For optimal battery life, don’t fetch too often.
    Turn Push on: Choose “Mail, Contacts, Calendars” > Fetch New Data, then tap to turn Push on.
    Set the interval to fetch data: Choose “Mail, Contacts, Calendars” > Fetch New Data, then choose how often you want to fetch data for all accounts.
    To conserve battery life, fetch less frequently.
    Setting Push to OFF (or setting Fetch to Manually on the Fetch New Data screen) overrides individual account settings.
    page 203 iPhone_User_Guide
    Message was edited by: Ingo2711

  • My Iphone 4 will not receive email when connected to wifi,works fine on 3G

    My Iphone will not receive emails when connected to wifi,works perfect on 3G

    Arrr I have this prob to and this has been driving me made i thought it was a network area have changed providers brought different sim cards to get new numbers deleted everything off my iphone to reset it and still no luck..
    After reading your comment it has actually been since I have updated my phone.
    I have to turn off my phone everyday as I fly and i need to recieve messages when my phone is turned on if this isnt resolved quickly I am going to have to switch from Apple but I dont want to...
    Apple can you please advise if this is going to be sorted asap? Alot of people dont turn there phones off all of the time so wont notice however for those of us that do and have to this is a really HUGE ERROR that needs your QUICKEST ATTENTION !
    Thanks ;-D

  • Not getting emails that are sent from outlook cliant

    i am not getting emails pushed or sent to my i phone 4s or ipad when they are sent from an outlook cliant base email they show on the server but not on the phone all other web emails work is there a fillter some were ?

    yes they will
    this is a feature of using IMAP email (iCloud, Google etc)

Maybe you are looking for

  • Closed lid

    is there any way to keep my music playing while the lid of the ibook is closed? in other words does the laptop have to go to sleep when closed, or is that a setting that i can change?

  • Looking for a Free RAW file to play with

    I don't have my SLR yet and Adobe seems to have not included a "sample" RAW image to play around with. Does anyone know where I might be able to download one for free just to mess around with? I've been playing with some jpg images and it's GREAT! I'

  • Upgrade to OS X 10.3.9 from 10.2.8

    Hello, I currenlty have a Mac Power G4, version 10.2.8, and want to upgrade to at least version 10.3.9. I found the updates to verions 10.3.1 and to 10.3.9 on the apple web-site. However, whenever I try to install them, I am told that I must have ver

  • Z Channel of Quad Encoder Signal

    Okay guys, I've got one for yous.... Here's what must be done: I have to use a PCI 6602 to generate all six channels of a quad encoder signal. This signal must be of variable frequency, and have the capability to be ramped. By ramped I mean I must be

  • Error on export, ultra hi-rez image / project

    I'm working on an HD+ project (ProRes4444, footage shot at 5K). And I'm doing tests with still images--importing them at a huge frame size. I'm not being naive. I genuinely need to get huge screen size, as it will be projected as such... and I wish t