I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place. Help

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place it moves to the right and is max out which makes every clip that I bring to the timeline expanded.

What format etc. are the video clips and what were they shot on?
Before you do anything else, trash the preferences with this free app:-
http://www.digitalrebellion.com/prefman/

Similar Messages

TS3716 installed the new itunes and now my ipod nano does not show in the device menu

installed the new itunes and now my ipod nano does not show in the device menu

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

I have an Ipod touch 4th generation 8gb and it comes on but does not go past the apple logo

I have an ipod touch 4th generation 8gb and it comes on but does not go past the apple logo. What do I need to do?

This problem happened to me a month ago. The way I used to fix it:
1. Go it DFU Mode. For going into that, check this page.
2. Connect your iPod to your PC which has iTunes and iTunes will detect your iPod in recovery mode.
3. Press Shift + Restore if you have the .ipsw firmware file downloaded on your windows PC or just click Restore and follow the instructions to download the firmware file.
4. Wait and finally you're done!

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

When I go to write a new text and I write my friend's name in, the phone gives me a choice of two numbers. One of them does not exist on the phone anymore, having been deleted. There is no pre-existing conversation so why?

Can anyone help with this as it is driving me mad and I keep calling numbers which no longer exist or I send texts to wrong numbers. There is no existing text converstation but when I go to write a name it will still show an old number which does not appear if you look at the entry for that person in contacts.

RLites22,
I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
KevinR_VZW
Follow us on Twitter @VZWSupport

I use Verizon Fios as my ISP. I am not able to set up verizon yahoo mail on my mini. I had set it up previously on my apple laptop and my iPad, but it does not work on the iPad mini. Also this morning it stopped working on the other apple devices.

I am currently using Verizon Fios as my ISP. I had my mail set up as verizon yahoo mail. I was attempting to set up my iPad mini to get my mail under apple mail. I have that working under my iMac, iPad, and apple notebook. I have not been able to get it to sync on the iPad mini. can you tell me the proper settings.

really your going to want to contact verizon to get the proper setting

I have both my iPhone and iPad backing up via iCloud, but they are not sharing the information between devices ie if I purchase an app on one it does not transfer to the other although the backup is successful via iCloud.

I have both my iPhone and iPad backing up via iCloud but the data is not being shared between the devices. When I backup it appears to be working as there are no error messages but the data is not shared between each. Any help would be great as this is very frustrating.

Backing up to icloud is not the same as syncing data between devices. Go to
Settings>Store. Turn on the automatic downloads that you want on that screen.
Settings>iCloud. Turn on the features you want to sync between devices.

The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, Sara

It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

AppleWorks Icon does not stay in the same position after saving

After I installed AppleWorks 6.2.8, each time I save the file (word prosessor or data base) the icon on the desktop always moves to the right side of the screen below the hard drive icons. If I drag it to different position, then save the file it will move to the right side of the screen. If the saved file is in a folder, it always goes back to it's origional position. In fact, the same thing happens to other applactions (PhotoShop, TurboCad, etc.). This only happens in OS 9.2.2. It does not happen in OSX 10.4.6. The same situation also happens on my iBook and PowerMac G4 MDD after installing AppleWorks 6.2.8.
My System: PowerMac 7300, Sonnet 1GHz G4, 1GB memory, OS 9.2.2, OSX 10.4.6
I checked the AppleWorks preferences and Control Panels and could not find any settings.
This does not happen with AppleWorks 5.
Anyone know what has happened? Are there settings I am missing?
Much Thanks,
Gene
Mac OS 9.2.x

Hello
If I remember well, AppleWorks 5 was saving one document by rewriting the old one. Doing that, all the file's attributes where kept.
AppleWorks 6 writes an entirely new file, so the icon is not preserved. Of course, some of us think that it would have been a good idea to keep the parameters of the old file and "paste" them to the new one.
I wrote a script doing that but it is not perfecly stable.
For my own use, I build an alias of every file to which I want to give an icon. The file itself doesn't keep the icon (and its position in the window) but the alias keep it.
If you are really bothered by the standard icon, create a subfolder in which you store the documents and use these two scripts.
--[SCRIPT hideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & "masqué") to ".masqué"
end try
--[/SCRIPT]
--[SCRIPT unHideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & ".masqué") to "masqué"
end try
--[/SCRIPT]
You will see the aliases with their icon and the true file will be safe in the hidden subFolder.
Yvan KOENIG (from FRANCE dimanche 10 septembre 2006 20:44:29)

MY CURSOR DOES NOT STAY AT THE END OF WHAT I TYPE IT DEFAULTS TO THE BEGINGING OF WHAT I TYPED

THE CURSOR USED TO STAY AT THE END OF WHAT EVER I TYPED IF I HAD TO CLICK ON A LINK AND THEN GO BACK IT WOULD ALWAYS BE THERE AT THE END NOW IT STAYS AT THE FRONT HOW DO I CHANGE THIS SO THAT THE CURSOR STAYS WHERE I NEED IT TO BE THE END OF WHAT EVER IS TYPED IN A FIELD?

No, they seem to have changed that behavior a few times.<br />
In some versions you go to the end of the text and apparently now to the begin of the text.
If you have problems with reading or writing lowercase text then you can use an extension to set a default font size and page zoom on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Shape does not stay on the same page

How do I get shapes to stay where I put them? Specifically:
1) How can I draw *circles around words* and make them STAY around those words, even when I add text and page-breaks above those words?
2) How can I draw *arrows ON my pictures* and make them STAY on my pictures, even when I add text and page-breaks above those pictures?
My dilemma is that "+moves with text+" ensures that they stay in the same place, even when I add text or page-breaks above the circles and arrows, BUT the circles and arrows are treated as text and I can't place them AROUND/ON my words and pictures.
The only other setting, "+fixed on page - no object wrap+" lets me place circles and arrows to be AROUND/ON my words and pictures (instead of beside), but they don't move WITH my text and pictures.
ARGH!!!!
Any help is greatly appreciated!!!!!

{quote:title=Brie Fly wrote:}
Many (including Pages™) will let you add circles and pointers in a meaningful way, but only after your words have been substantially processed.
What do you mean by "substantially processed"?
And the feature I'm describing (having a shape linked to text so that it moves with the text) is a feature I have used in MS Word. In their terms, you "anchor" your shape to a spot in the text. When that spot in the text is moved, the anchored shape moves with it.
Thanks for the input though, Brie.

WVC210 with Motion Detection does not stay in the correct position

When I set the camera in a specific position (setting it as Home) and then I enable Motion Detection feature (setting area and sensibility using the home position); if i have set the "Disable Motion Detection while position is incorrect" with "Go to Motion Detection position if idle" option the camera will reset the tilt after the time set has expired.
Is it a known bug (I have not found anything about that here)?
Is there a way to set which is the motion detection position to be held?

Hi M.Bordoni,
I will pass this onto the wonderful folks at the Small Business Support Center to get their opinion.
Just out of interest, I'm guessing you are utilities built within the camera to send a image somewhere ?
Are you using the free Surveillance monitoring application to store captured video on your NAS/PC or server ?
regards Dave

Downloaded Podcast RSS Episode does not stay in the original RSS feed.

Hello,
I just upgraded to iTunes ver. 9 on a windows XP PC. Before the upgrade my podcasts would download into the original RSS podcast feed created when I entered the initial URL. Since the update every time the new podcast’s is downloaded they dissapear from the original RSS feed and become an episode all alone within the podcast window. I want them to stay within the feed like before. I have spent hours trying to make changes under the info to try to make the podcast stay inside the original podcast folder with no luck. Before this upgrade the podcast downloads worked exactly the way I wanted them to, but since the upgrade I find it difficult to manage my selections. Is this a bug or is there some way to make the podcast group the way they used to? Any help would be appreciated. I am a new iTunes user who plans to move to the iphone in December so the configuration of iTunes is critical to this decision as I plan to synchronize my selections.
Thanks for any help you may provide!

i have the exact same problem... already made a post about it as well. please keep me posted if you find anything, ill do the same.

Apps are not staying in the group folders,I typed a Bios code thing online into my search bar and now all my apps are not staying in the right places

Hello I'm having an issue with my iPhone I've typed a code of some sort into my search Barr to find hidden files , but now every one of my apps will not stay in their respective groups of folders...is there anyway to undo this code string ....

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place. Help

Similar Messages

Maybe you are looking for