I am running 6.1.3 on my iphone 4. In the last week, I have not been able to log into my Comcast account. The phone is not recognizing the user name and/or password. Both are the same that I use to log into email on my PC and they work fine. Any tips?

I am getting the same message when I try to log in thru www.comcast.net on Safari, the Comcast Xfinity app and adding Comcast to my email accounts. I've also turned the phone on and off with no good results. My husband had the same problem and finally opened a Gmail account and had his Comcast email forwarded there. Any ideas would be appreciated.

Have you tried adding your comcast account using the built in IOS mail app.
If you're using the Comcast Xfinity app, then look at their support site or ask the app developer.

Similar Messages

  • My iphoto9 has not been able to open for over 10 days!!  I can't load my Christmas pics, etc.  I know the pics are still there because I can access them through a round about way.  Can anyone help me to OPEN iPHOTO!?

    My iphoto9 has not been able to open for over 10 days!!  I can't load my Christmas pics, etc.  I know the pics are still there because I can access them through a round about way.  Can anyone help me to OPEN iPHOTO!?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • How do I send group emails from my iPad? They work fine from my MacBook but not the iPad.

    How do I send group emails from an iPad? They work fine on my MacBook but not my iPad.

    You need a third party app to do that. Look at Mail Shot or Group Email in the app store. You cannot do it with the built in mail app and the contacts app in iOS 5 without a third party app.

  • I have a macbook pro and some of the original widgets have been removed by mistake and I can't find them torestore them. I wanted the original one back on the dashboard but I have't been able to do that. HELP !!! Thanks...

    I have a macbook pro and some of the original widgets have been removed from the dashboard dock by mistake. I can't seen to find them to restore tham. HELP!!!

    Widgets are located in the folder, users/"user name"/library/widgets/
    Whilst holding down the option key in finder, and selecting the library under the "go" menu, you can access your library within Lion.
    If you have a working Time Machine backup, you can restore those missing files back to the widgets folder. If you don't, and your widgets folder is empty, then they are indeed gone (unless they are still in the trash). You would then have to re-download them from where they came.
    If everything is there, then just click the "+" symbol at the lower left corner of the dashboard screen to add them back to the window.

  • Over the last week my Firefox has been crashing whenever i close games and sometimes in the middle of them. What is going on??

    I got a new rogers box and I had a Norton Security installed and since then the games like farmville and cityville have been crashing on a regular basis. I have called about the Norton 3 times, and i tried the Internet wireless and wired and nothing has changed so I don't know what else they can do. Is there something wrong with the flash player over the last week????

    It seems to be a common complaint. Norton Security does not play nicely with Firefox (or IE).

  • Ever since the last download, I am unable to edit my playlists on itunes. When my phone is not plugged in, my playlists that are on my phone are not on itunes but my songs are. Only the default playlists show up. How can I get all of my playlists back?

    I usually create and edit playlists on itunes and then sync my phone to update my phone.  Ever since the last upgrade, I can't do this.  When I open itunes, my playlists are not there, only the songs and the default playlists.  If I plug my phone in and click on My Phone at the top of the screen, I can see my playlists but I can't edit them.  How can I get my playlists that are on my phone back on my itunes?

    http://support.apple.com/kb/HT1296

  • HT1491 On both my iPhone & My iPad I keep getting the same message.  Cannot connect to iTunes Store.  I can connect on my Mac.  Until the other day I have always been able to connect on both iPad & iPhone.

    All of a sudden I keep getting the same message on both my Iphone and Ipad.  (Cannot connect to Itunes Store.)   (OK)
    I am able to connect on my Mac.   My Password is correct.

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • HT1551 I've set up our Apple TV and we used it with no issues for a time but after the first month we have never been able to use it.  Upon purchasing a movie it says that it is downloading the movie then shuts down.

    I have had our media company to see what the problem is a few times but with no success. Anyone able to assist or direct me so that I can once again use my Apple TV?

    I would grab a micro usb cable and restore in iTunes. Or you can take it in to a local Apple store/reseller.
    http://support.apple.com/kb/HT4367

  • For the last week I have had difficulty getting into the Familysearch website with Firefox. It comes up with connection reset. This problem does not occur with either internet explorer or Google chrome. Are you aware of this?

    I was told this problem is likely because of an update in coding which IE can read, but Firefox has yet to implement. Is this correct, and if so will it be rectified soon. I much prefer using Firefox than going between to the two search engines as I am having to do at present. Sometimes the home page comes out and the connection times out when processing the request, other times I can't even load the home page

    The website's link you provided isn't working here either. Contact the Website's Developers about this issue.

  • Authorization error; unknown user name or incorrect password

    Hi,
    We are facing the issue logging into Integration Builder in PI system getting "Authorization error; unknown user name or incorrect password" for all the users.I able to login NWA in PI system.Please find the default trace details below.help us.
    #1.#5611B888D81000840000018F0284005E0004B97914AC4703#1329829595847#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.
    core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##fxtcs.unix_FXT_336466250#Guest#e2057c775c8c11e1bb605611b888d
    810#SAPEngine_Application_Thread[impl:3]_49##0#0#Error##Java###doLogon failed
    [EXCEPTION]
    #1#com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED
            at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:946)
            at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
            at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
            at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
            at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
            at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(AccessController.java:219)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Regrads,
    Mani

    Hi,
    Check this for the roles required for integration builder [http://help.sap.com/SAPHELP_NW04S/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm]
    Accordingly get the required role assigned to the user you are using there.
    Unlock the user if it is locked
    Reset the password and provide the new password in the login settings
    Give a try again
    Regards,
    Venkata S Pagolu
    Edited by: Venkata Pagolu on Feb 22, 2012 4:23 PM

  • "Logon failure: unknown user name or bad password" even with correct Credentials

    I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem. 
    I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
    this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
    each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
    "Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
    I don’t fully understand this error, because on the surface, it’s just WRONG! 
    My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
    just purchased last month.
    I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
    I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
    All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
    The six computers are as follows: (I figured this may make is easier to visualize the layout)
    HostPC: HP Desktop W8.1           
    PC Name: DrsBlend
    U/N: DrsBlend  p/w: 123456 (not showing my real password)
    PC1: HP Laptop W8.1
    PC Name: DrsBlend-1
    U/N: DrsBlend    P/W: 123456
    PC2: HP Laptop W8.1
    PC Name: DrsBlend-2
    U/N: DrsBlend    P/W: 123456
    PC3: HP Laptop W8.1
    PC Name: DrsBlend-3
    U/N: DrsBlend    P/W: 123456
    PC4: HP Desktop W7 SP1
    PC Name: DrsBlend-4
    U/N: DrsBlend    P/W: 123456
    PC5: Dell Laptop XP SP3
    PC Name: DrsBlend-5
    U/N: DrsBlend    P/W: 123456
    Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
    PC5.
    The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC. 
    It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
    Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
    Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
    Anyone have any additional suggestions?

    Hi，
    How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
    And could you please tell us the detailed information about how the six PCs connect to the home network?
    Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
    You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
    Yolanda Zhu
    TechNet Community Support

  • EffectiveUserName Logon failure: unknown user name or bad password

    Hi
    I am trying to connect Sharepoint 2013 services (performancepoint , excel services) to SSAS 2012 using the EffectiveUserName.
    I was getting a error message regarding conencting the datasource and when checking profiler it was saying Logon failure: unknown user name or bad password.
    On the SSAS server i tried using EffectiveUserName in the additional Connection Parameters and it failed for the above reason. I also tried my username as well as the sharepoint service account
    the sharepoint service account and my username are both server admins.
    When I try using the EffectiveUserName in the additional Connection Parameters on another server I can connect with no problems.
    What seems to be the different with server where I am getting the error message?
    Regards

    Hi aivoryuk,
    According to your description, you get the "unknown user name or bad password" error when using EffectiveUserName in Connection parameter to connect Analysis Services. Right?
    In this scenario, if you use a connection string to create the data connection, and the connection string contains an effective user field, the EffectiveUserName feature will override the user-supplied effective user value with the system-supplied value.
    On this server, you may use a domain user to run the SSAS. So it will show the "unknown user name or bad password." However, on the other server, it may use system build-in account to run SSAS. Please refer to link below to check the steps for using
    Analysis Services EffectiveUserName in SharePoint Server 2013:
    https://technet.microsoft.com/en-us/library/jj219741(v=office.15).aspx
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support
    Hi thanks for the link but it just shows how to set effective user name in sharepoint which I know how to do.
    In SSMS and when I connect to the SSAS server and I select options and then I go to the addional connection parameters tab i set Effectivename ="domain\username" on once server I get the error mesage but on the other I don't.
    I'm not clear from you explanation as to why this is?
    Regards

  • My four-month-old macbook pro's battery when fully charged is now down to 2 hours life from 7...in the last week. Why?

    I bought my macbook pro 13" about four months ago and have been in love with it ever since - especially as compared to my old PC laptop, the battery stays cool and lasts forever when I am working. Best charge was 7 hours. However, in the last week I have noticed the battery suddenly becoming hot when I unplug the charger, and the best length of time I can get on a full charge is 2 hours.
    I have made sure all the settings are for prolonged battery life - which they've been since I first set up - and turned off all programmes running in the background, but this has not made any difference. I have been using iMovie a lot lately which takes a lot of battery which is probably why I didn't notice the battery being low as it automatically seems to make the battery slump to 2 hours when it's on. It's off now, and my battery won't improve.
    I have also now followed the instructions (below) about calibrating, but this has had no effect. My housemate bought the same model a month ahead of me, uses it probably slightly less, but his is still 7 hours for a charge.
    Is my battery faulty?
    Calibration instructions used:
    PowerBook G4 (15-inchDouble-Layer SD), MacBook (all models), MacBook Pro (all models), and MacBookPro (17-inch) (all models)
    Thebattery calibration for the PowerBook G4 (15-inch Double-Layer SD) and anymodel of MacBook or MacBook Pro has been updated because of a new batteryreleased with this computer. With these computers, follow these steps tocalibrate your battery:
    Plug in the power adapter and     fully charge your PowerBook's battery until the light ring or LED on the     power adapter plug changes to green and the onscreen meter in the menu bar     indicates that the battery is fully charged.
    Allow the battery to rest in the     fully charged state for at least two hours. You may use your computer     during this time as long as the adapter is plugged in.
    Disconnect the power adapter while     the computer still on and start running the computer off battery power.     You may use your computer during this time. When your battery gets low,     the low battery warning dialog appears on the screen.
    At this point, save your     work.  Continue to use your computer; when the battery gets very low,     the computer will automatically go to sleep.
    Turn off the computer or allow it     to sleep for five hours or more.
    Connect the power adapter and     leave it connected until the battery is fully charged again.
    Tip:When the battery reaches "empty", the computer is forced into sleepmode. The battery actually keeps back a reserve beyond "empty", tomaintain the computer in sleep for a period of time. Once the battery is trulyexhausted, the computer is forced to shut down. At this point, with the safesleep function introduced in the PowerBook G4 (15-inch Double-Layer SD)computers, the computer's memory contents have been saved to the hard drive.When power is restored, the computer returns itself to its pre-sleep stateusing the safe sleep image on the hard drive.

    Thanks Sig. The information is here: Anything useful stand out?
    Battery Information:
      Model Information:
      Serial Number:    9G1130CJVD3MA
      Manufacturer:    DP
      Device Name:    bq20z451
      Pack Lot Code:    0000
      PCB Lot Code:    0000
      Firmware Version:    0201
      Hardware Revision:    0002
      Cell Revision:    0158
      Charge Information:
      Charge Remaining (mAh):    5663
      Fully Charged:    Yes
      Charging:    No
      Full Charge Capacity (mAh):    5663
      Health Information:
      Cycle Count:    59
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    261
      Voltage (mV):    12574
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      Wake on LAN:    Yes
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      Battery Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    2
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      Display Sleep Uses Dim:    Yes
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    Yes
      ID:    0x0100
      Wattage (W):    60
      Revision:    0x0000
      Family:    0x00ba
      Serial Number:    0x00262704
      Charging:    No

  • Is there a reason that Skype quit workin on my macbook pro in the last week?  Microsoft went their messenger to it, so is there something there?

    I have a macbook pro, in the last week, i have lost the use of skype. is there a reason? has it something to do with Microsoft setting their msn up there?

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • IPhone question:  Im trying to update applications on my iphone.  When I do it I'm as for password from a different Apple ID from what I have in Itunes.  How do I change so that both are the same?

    IPhone question:  Im trying to update applications on my iphone.  When I do it I'm as for password from a different Apple ID from what I have in Itunes.  How do I change so that both are the same?

    All apps are tied to the apple id that it was used to purchase or download the app.
    did you use a different id to buy the app?
    you can change id, settings - appstore - apple id - log out and log in with correct id.

Maybe you are looking for