I am running windows 7. My itunes keep shutting down on me. I keep getting the message itunes has stopped working What can I do?
I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?
Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling
Similar Messages
-
When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."
I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?
Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason -
My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
When I try to open up itunes I am getting the message that itunes has stopped working and then microsoft sends an error message to find a solution. What can I do to fix my itunes?
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.
Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I recently updated ibook in my Itunes. Now, every time I sync, I get the message that it won't update the ipod as ibook won't run in OS6. Is there any way I can revert the ibook app in itunes so it quits trying to install the current ibook app. I am trying to stop getting the warning message. I am also concerned if I ever have to reinstall the app.
Delete the app from the iTunes library on your computer and then transfer the version from iPod to computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer -
I keep getting the message'Itunes library cannot be read because it was started by a later version' - I had to recently reset my computer to an earlier version as I had a printer problem
Then you either need to upgrade iTunes again, or fish out the older version of your library from the Previous iTunes Libraries folder (inside <Profile's Music>\iTunes) that corresponds to the older version of iTunes you are now using. You can rename the current .itl file as say iTunes Library (10.5).itl and then rename the copied file as iTunes Library.itl.
tt2. -
I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?
I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?
-
I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"
COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
-
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." ?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Hiding Characteristics in SAP Bex/ WAD
Dear Experts, I have a requirement of hiding columns in my report dynamically. Parameter Char1 Char2 Char 3 A 10 5 6 B Yes No Yes C 15 41 40 D 12 12 4 In Input Selection, I have a field called Char4. When Char4 = 1, it needs to shows only two colu
-
Publishing site with Workflow not working properly
Hello All I have created a Publishing Site Collection on SharePoint 2013 on-premises and when I create a new sub-site using the "Publishing site with Workflow" template, I get redirected to the site home page and I get the option to PUBLISH the page.
-
Hi. I am writing a small code in html header which goes like this <table1 border="1" > <tr1> <td1 width = "25%"> <img1 border="0" src1="#WORKSPACE_IMAGES#image.gif" width="182" height="46"> </td1> <td1 width="65%" ><p align="center"><font1 size="6" c
-
Mac restarts when using either firefox or safari
mac restarts when I'm using these browsers. I'm not sure what's causing it. Removed add-on themes in Firefox. Reinstalled firefox using default themes. I did all these using Admin rights.
-
No signal in Taunton Somerset TA2. Can't select EE on Network Selections.
There is absolutely no EE signal on my Note 2 in Taunton TA2 today. I've tried searching for the network operator but not offered EE. Is this a service issue?