I am traveling to Italy from U.S. and bought American Tourister Worldwide Adaptor Plug for my iPhone 5 andiPad 2. The instructions saying is not for use with grounded plugs and can only be connected with non-grounding circuits. Will this adaptor work?
I am traveling to Italy and bought an American Tourister Worldwide Adaptor a plug for my iPhone 5 and iPad 2. The instructions say it is not for grounding use and not for use with grounded plugs. Will this work?
That adaptor should work.
Similar Messages
-
Has anyone else had trouble with update 6.1.2 for I phone? After the update, I can't get back on my network (password is correct), ICLOUD doesn't transfer my downloads, nothing seems to work. It saved my calandar and address book, but lost all of my apps and music (except for a few songs, figure that out) and I can't get them back. Any suggestions?
I had this problem post 6.1. Not sure if it was a coincidence, but I'd just recently changed my password after being convinced I'd been hacked, due to being told I was entering my password wrongly, repeatedly by iCloud / iTunes. It turns out my iCloud account on my Settings -> Mail, Contacts and Calendars was listed as Inactive. Putting in my details, turning off Contacts over iCloud (thus deleting them) and turning them back on again, repopulated my contacts from iCloud with numbers attached to them.
-
I got factory unlocked iphone5s A1530 model from india with warranty... Now i shifting to regina canada so will this phone work in canada with canadian sim card...with Canadian operators permanently...
Remember though, that although you have warranty on this phone, it is only valid in India and NOT Canada, because you purchased the phone in India and iPhone warranty is country specific, so if you have problems with the phone, then you'll need to take it back to India to get it fixed.
If you will be in Canada for any length of time, then buy a new phone in Canada. It will be guaranteed to work then and you will also have warranty cover. -
My iphone 4s is not charging using wall charger. I can only charge it through my laptop and a desktop. I tried so many chargers already but it is still the same. Can somebody help me please...
My current ios is 6.1.3
I tried so many chargers thinking that my wall charger is defective. But still my phone is not charging. Its always through laptop and desktop only that i can do charging...help me please....
Thank youHello Regina0117
If you already try other chargers and still not working, the best advise is for you to contact apple support, if you still in warranty they will change it for you for free.
Start you case here:
http://www.apple.com/support/contact/
And contact apple support
Cheers, Lima -
Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this code and it is a Christmas gift to my wife. HELP!
I had this problem. There are actually two boxes. The outside one with the photos and stuff and glued into it is another box containing the disks. That box has the serial number. Adobe was NO help with this as if no one else ever could not find it. I had to rip open the outer box.
-
Hi can anyone help me? My MacBook Pro cannot charge at all (keeps showing not charging or not connected) when i am using it. only when i shut it down or let it sleep then wil it begin to charge normally. Does anyone know what to do??
You could always try a SMC reset -> http://support.apple.com/kb/HT3964 - but I don't believe that will solve your problem.
If I were you, I would take the machine to your local Apple Store or an AASP and have them diagnose the problem. It could be something very simple or it may be something more complex within the power management system.
Good luck,
Clinton -
App does not find printer. I have windows 7.
DDid you do a hard reset? Sleep button and home button together until rebot. Nothing erased.
-
How do I delete photos and photo albums from my iPhone 4? The instructions given do not work. No "delete" symbol appears next to the album name when I press "Edit," and no trash can icon for me to click appears below most of the individual photos in the albums the computer just loaded on my new iPhone 4. When I synced the new phone the computer added these photo albums without permission from me. They are now taking up about 3 GB of memory on my phone. I would like very much to get rid of these photos from the phone. How do I do this?
To delete photos from your device
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply. -
Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?
iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it. -
My daughter is traveling to Italy from Canada with her iphone 5,
I am in Canada and also have an iphone 5,
can we communicate with out costing us extra?That adaptor should work.
-
I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?
Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen -
I am traveling to Italy from Australia. Can anyone tell me the usage costs on a Telstra service? Is it cheaper/better to buy a package with a local carrier in Italy?
Did you get resoulution. What state are you in?
-
I need to download dell drivers to a jumpdrive connected to my iMac. Will this cause problems with my Mac?
Thanks. These drivers are for the audio, etc. for a dell laptop I purchased used. ( Needed something cheap for a training video that would only run on Windows. Tried Emedia player but picture was too fuzzy.) Dell support said I should contact Apple support for instructions on how to get the drivers onto the jumpdrive. Any tips on doing that?
-
I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.
Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up.......... -
Only a connection with the data base
I have an application MDI - opening of some windows at the same time.
I use framework ADF Oracle - Swing/ADF JClient.
For each new JInternalFrame a BindingContext (bootstrap) is servant, with this a new connection in the data base is created. Already I tried to use the same, but generally an action in a screen intervenes with the other.
How I can make this (application MDI - ADF) only having a connection in the database?
Thank you!!!If I have only one connection with
the Data Base, two threads can't to request the data
in the same time?.If two threads use the same database connection at the same time, bad things will happen. That is why each thread must use its own database connection. The easiest way to make that happen is to have a pool of connections.
This site will do translations for you:
http://world.altavista.com/
It is not very good but it knows Spanish better than I do.
Maybe you are looking for
-
Error in opening EM..plz Help..
Error in opening EM..plz Help.. Hi.. I want to start the Enterprise Manager i started step by step.. but when i had started em in the console /oracle/infs/bin/ ./emctl start it gaves me these error.. "$ emctl start Waiting for EM to initialize ..log4
-
IMac problem with Lion.
Just installed Lion on iMac 2.66 GHz Intel Core 2 Duo, 4GB 1067 MHz DDR3. How do i get System Information to run? Won't load from More Info..., won't load with option Apple, and won't load from Utilities?
-
I cannot get the data from my query to show in the relevant matrix columns: oForm.DataSources.DBDataSources.Add("OQUT") 'Create Datatable and populate with query oForm.DataSources.DataTables.Add("oMatrixDT") oForm.
-
What are credentials/tokens needed to connect to FMS
I'm trying to connect to FMS with Wirecast and keep getting this error Cannot publish the stream. Verify the stream name and if you have provided any credentials/tokens that they are up to date. [-4020]that they are up to date. and of course, can not
-
Automator - Changing JPEG Compression has no effect
I have an application using Render PDF Pages as Images, using JPEG compression, but no matter what I change the Compression setting to, the image is always the same size. Bug or something else?