I am trying make a flash drive bootable so i can install OSX Mountain lion it BUT it has MBR partition on it how can i remove this partition

I am trying make a flash drive bootable so i can install OSX Mountain lion it BUT it has MBR partition on it how can i remove this partition
Regards
Warren

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Similar Messages

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • Can somebody please advise urgently... I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion. I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted

    Can somebody please advise urgently...
    I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
    I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and  following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
    I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
    Can somebosy please help me urgently??!!!

    Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
    So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
    Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
    If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
    BR Pete

  • I have an Mac air 2011  and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

    I have an Mac air 2011  and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

    i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

  • HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
    I also have this problem...........

  • While attempting to update my ipad2 with the 8.1.3 update, screen froze towards the end of the update.  Tried to turn it off by holding power butter to do a hard reset, but it won't turn off.  How do I fix this?

    While attempting to update my ipad2 with the 8.1.3 update, screen froze towards the end of the update.  Tried to turn it off by holding power butter to do a hard reset, but it won't turn off.  How do I fix this?

    Have you tried a soft-reset : Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should reappear and it will hopefully reboot.
    If that doesn't work : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable?  The article referenced is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable?  The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
    You have two or three options (depending on your Mac Model).
    1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
    2. Download Software from Apple servers...
    3. Install Windows...
    Are any additional instructions really necessary?

  • Help. I accidentally formatted by the device name not the volume name when trying fresh install osx Mountain lion.

    I was trying to do a fresh instal of Mountain Lion. By fresh I mean clean.
    Firstly, my iMac disc drive isn't really working to well, so I have Mountain Lion on a usb.
    I started up and held the option key.
    Entered into disc utility mode, and started doing everything correct.
    Then near at the end I when i'm required to select a start up disc it doesnt show anything... Help?
    I checked around online and saw this tutorially and notice I had done something different.
    http://macs.about.com/od/MountainLion/ss/How-To-Perform-A-Clean-Install-Of-Os-X- Mountain-Lion-On-A-Startup-Drive.htm
    on page 2. where it says
    When Disk Utility opens, select your Mac's startup volume from the list of devices. If you never changed its name, the startup volume will be listed as Macintosh HD. Be sure to select the volume name and not the device name, which will usually be the name of the physical drive, for instance, "500 GB WDC WD5."
    I think I may have selected the device name. Is this the cause of my problem?
    Can I fix this ? Please help?
    I live in Auckland in New Zealand, I don't have any apple stores here

    Ok, I realized that won't work, I don't think, because you can't enable it on your Mac.
    However, if you have another Mac, you can use Firewire Target Disk Mode to install. Boot your Mac while holding down the T key. You will see a FireWire symbol on the screen. Then, connect the two with a Firewire cable. Your Mac hard drive will show up on the other. Try to install onto that.
    This may not work, depending on the other Mac. If it is similar to yours, it should.
    I'm not sure if you can do it the other way. If you put the DVD into the other Mac and boot it into Target Disk Mode, then boot yours holding down the option key, you may be able to select the DVD on the other Mac as the startup.
    This very old article seems to indicate it will work: http://lowendmac.com/misc/06/0914.html
    Remote Disc Instructions:
    Here is Apple's info: http://support.apple.com/kb/HT5287
    Here is now to enable seeing the Remote Disc on your Mac: http://hints.macworld.com/article.php?story=2009012605560521

  • HT1338 I INSTALLED OSX MOUNTAIN LION. NOW I CANT OPEN MY IPHOTO.  I HAVE TRIED ALL THE WAYS TO REPAIR IT AND NOTHING WORKS.

    MY NEW OSX MOUNTAIN LION WORKED FOR TWO DAYS , NOW IPHOTO WILL NOT OPEN .  IT KEEPS TELLING ME HOW TO FIX IT
    BY RESTARTING. I HAVE FOLLOWED ALL THE INSTRUCTIONS AND CAN NOT OPEN IPHOTO IT JUST KEEPS LOADING.  THEN NOTHING SHOWS UP NO PHOTOS.  PLEASE ADVISE IF THIS IS A COMMON THING ?

    Did you check if you have sufficient RAM.   Though Apple says 2GB, 4GB is much better as you need to take into account what other usage your RAM is put to.
    Otherwise, agree with Barry; it does seem excessive.   If you restart, it will either show as 'paused' or be absent from your purchase list.  If paused, check out ...
    Mac App Store: How to resume interrupted downloads

  • USB Flash Drive Bootable?

    Hello everyone,
    I have a 1GB USB Flash Drive which I want to boot up from and run Drive Genius.
    I made an image copy of leopard and deleted some stuff to make it go under 1GB. I have added the applications I wanted. Everything is good. My question:
    How can I make the flash drive bootable?
    How can I tell it which application I want it to open on startup?
    Thanks in advance,
    iloveisrael.

    iloveisrael wrote:
    Well, I've just tried booting from the USB Drive from the Startup Disk. It restarted the computer and it showed the apple symbol with the circle (meaning that it's loading), but then it would just restart my computer. I didn't see any apple menu, no terminal, no nothing. The problem is, my USB Drive has only 1 GB. However, I can use a DVD (4.7 GB), but I can only write on it once. I can't make mistakes because I don't want to waste them. Do you have any suggestions of how I can boot into an application? What should I erase from the image? What should I not erase? Any help would be GREATLY appreciated.
    Thanks,
    iloveisrael.
    sorry I don't know. you'll have to experiment and see. get a rewritable DVD and go at it.
    i have to admit that I don't know how bootability works on DVDs. Normally one has to bless a system folder after you copy a system to a new drive. That's how normal bootable clones are created. However, you can't do it with a regular DVD which is what the leopard install disk is so an entirely different mechanism is used and I don't know what that is at all.
    also keep in mind that even if you make it work the chances that your apps will actually run are very slim. most apps are not designed to run like that. they use various frameworks missing from the system on the install DVD.

  • How to Create a Bootable Flash Drive to do a clean install of Lion.  I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

    How to Create a Bootable Flash Drive to do a clean install of Lion.  I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
    The system I'm have is a Mac-mini that had SL on it and no SuperDrive.  I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
    PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
    If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

    Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
    If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
    After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
    Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
    Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
    This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
    This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
    If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
    The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
    And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
    Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
    Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
    Step 2
    After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
    Step 3
    After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
    One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
    The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
    To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
    That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
    To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

  • I  want to make a bootable usb drive for my macbook air,and my ystem is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things

    I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
    Message was edited by: tzaphon

    This is not difficult and you will not have to download from the app store.
    your computer has what is called  a recovery partition that came with it.
    simply hold cmd+R while you boot up. let go a second after you hear the chime.
    you will boot into the recovery partition.
    Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
    it will ask  you which disk you want to install ML onto. Choose your new USB drive.
    easy peasy

  • I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'.  i know my connection is active, so how can I fix this problem?

    I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'.  i know my connection is active, so how can I fix this problem?

    Hi there pamela123456,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W.

  • Where can I get mountain lion on a flash drive?

    Where can I get mountain lion on a flash drive?

    There are none available except for ones you've created yourself.
    (75822)

  • How do I install updated Flash drive? It seems to require OSX 12.

    How do I install the latest version of Adobe Flash Drive ??  It seems to require a12.1 version and I have a 10.68.  How do I expand to a 12.1 ??

    First, you have posted in a PPC forum, but your profile shows you have Snow Leopard installed. That requires an Intel Mac.
    If you have a PPC then you cannot upgrade Adobe Flash from where you are. If you have an Intel Mac you will have to upgrade to Adobe Flash Player 12.0.0.77.

Maybe you are looking for