I am trying to burn a dvd and it will not allow me to do this because it states that i do not have enough space for encoding disk. how do i free up space and from where?
I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?
iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space".
Similar Messages
-
my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I tried to install Mavericks but shortly after the installation initialized I got a message saying that I didn't have enough space to complete the install. It asked to free up just under 1 MB of space...but I cannot get access to my hard drive. When the computer turns on, it loads the OS X utilities screen with the following options
1 Windows
2 OS X INstaller
3 Recovery
So, I cannot access the MAC HD to free up space or complete the install. I am stressing that I am going to lose all of my data on my hard drive! Please help!
P.S We have boot camp and that works fine but cannot gain access to the MAC drive.OPTION boot to select your OS X partition:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you have no OS X volume showing, then you are in deep doo-doo. You will need to erase the OS X volume and reinstall OS X. This would be done from the Recovery HD which you said was an available boot option.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks
Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .
-
Insufficient disk space for encoding. disk space on encoding target drive?
I keep having this message when I try to burn\enconde\build a DVD with DVDSP 4, I'm setting the Build folder in a external hard drive with 300Gigas free, so for sure is not the porblem...
Insufficient disk space for encoding. Please free up disk space on your encoding target drive
What should I do?? its kind of urgent!
Cheers,
JavierAh Ha!
I found this in a 2-pop forum - it may be the solution...
"Are you both using the DVDSP Background encoder? If so, make sure the *DESTINATIONS PREFERENCE for ENCODING is pointing to the disk drive that actually HAS the free space* - normally, it points to the SAME FOLDER where the asset is living. If you're short on space on that drive, that will trigger the condition you describe... - always maintain this free space " -
Insufficient Disk Space for Encoding but 49.7 GB free on drive???
Attempting to build a DVD project, but I keep getting an error that there's insufficient disk space. There's almost 50GB free on the drive. What gives?
Permissions should be fine, considering I burned a DVD not more than 6 days ago, same drive.
I import video from my camcorder, create a menu screen, import the screen and video into DVD Studio Pro 3, build the project, then burn to DVD with Toast (I never have been able to burn straight from DVD Studio Pro for some strange reason)
But as of yesterday, DVD Studio Pro tells me there's not enough disk space to Encode the files. The full DVD is only 3.9 GB, and with 49 GB of empty disk space on the hard drive, that should be more than enough room to build!!! -
My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?
My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?
-
I rented a movie on iTunes for my iPhone. I had to pause it. When I came back, it could not play because it said I didn't have enough storage now. Anyone know how to correct this?
You move the movie from iTunes to iPad (tap to enlarge image)
Movie will be moved to the Videos app. -
Does anyone know how to solve this problem: I a trying to download a paid app but I cannot because the AppStore says that info not have enough space to download it even though I have more than enough space so if any of you know what can solve this problem then please let me know
The app is compressed and needs swap space to install. As a rule of thumb you need 3 times the listed size of the app available, or in your case 4.6GB. You only have 1.7GB.
-
I want to buy an Ipad mini for my brother in spain, but right now the waiting list there is quite long, so I was wondering if I buy it here in London, will it be the same? I mean, can I change the language, it will be exactly like the one they sell in spain, keyboard etc.. Thank you
It's completely the same, and you can change language and keyboard when he uses it. It will ask him for the language, so choose Spanish
-
My ipad was not updated since the 5.1 and now when I go to update to IOS 7 it states that my ipad is up to date. Please advise how to update from here.
TheQuestionaire wrote:
My ipad was not updated since the 5.1 ...
Sounds like yours could be an iPad 1.
If so... iOS 5.1.1 is as far as it goes. -
I'm trying to burn a Magic DVD in iDVD and I keep getting a message stating that there is not enough free disc space for encoding the remaining assets. How do I resolve this?
It means your hard drive is too full to accomodate the project and its many swap files etc.
You need to move some files (not applications) to your external hard drive, and keep at least 25-30GB free. -
I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?
Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W -
I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank youAssuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store. -
I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?
I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards
Maybe you are looking for
-
Hi, My setup is MEGA 651 with AIW ATI Radeon 8500, Win XP. As a monitor I am using Sony Grand Wega 42" LCD TV. Works great. I am using 2 connections from my video card, one is S-Video (display is somewhat blurry) and DVI (very sharp and looks like sc
-
ISSUE WITH LATEST VERSION 7.6.9. QT
I have a quick time movie showing a 360' photograph which had previously worked ok in qt but since installing new version it crashes in every browser.I have uninstalled and gone back to earlier version though this means I can't update itunes. Error g
-
Itunes 10.5 does not detect my ipod touch
I recently update my itunes to 10.5 and when I connect my Ipod touch to my computer Ituens will not detected. My Ipod will show up on my computer but not on Itunes. Any ideas how can I fix this??? I try restaring my Ipod, REinstalling Itunes but noth
-
EJB3 : suspend JTA transaction does not release the connection in the XA DS
Hi all, I did a test and after suspending a JTA transaction I note that in the xa datasource the activeconnection = 1. So is it normal because I was thinking that when I suspend the transaction the teh connection is released and then after a transact
-
Oracle 10gR3 BAM configuration on Websphere
We are having issues with 10gR3 BAM configuration on Websphere 6.1.0.19. While running oraclebpmwarehouse.sh, the service does not run. Has anyone done a successful configuration of BAM for Websphere? Thanks in advance for any help.