I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?
I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?
ashet8 wrote:
I wanted to transfer songs.....
See Here > http://support.apple.com/kb/HT1386
What you can sync
Applications
Audio content—music, podcasts, audiobooks, and iTunes U content
Similar Messages
-
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
When at a remote location ( not on a network) my ipad cannot connect and print to my bluetooth printer ( hp 100 wbt)
How can I connect to a blue tooth printer when NOT on a network?
Please helpiOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Can the printer also print via wifi?
If your location does’t have wifi use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
i have an ipod touch linked to laptop, i now want to add another ipod touch how do i do it using same email etc, but dont want the same apps etc as the first ipod. as it is now i have exactly the same stuff on both ipods. please help.
It's a snap. Each device has its own name. If iTunes does not assign unique names for the two iPods, change one of the names yourself. You can see both my iPad and my iPod simultaneously on my iTunes because I sync wirelessly.
Simply configure the sync characteristics for each device separately. The iTunes software will know the one with which it's communicating. -
When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
HELP!!!!Zoom in to read pleasebut can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English. -
My Ipod touch ios version 6.1.3 will not allow me to connect to my wifi, Please help me!!
My ipod touch ios version 6.1.3 will not allow me to connect to my wifi. I tried rebooting my wifi router, refreshing my ipod, resseting the networks and manually logging into my wifi. Sometimes it will go through for a brief moment, but the wifi connection will ultimately disconnect. Each time i try to connect to my wifi afterwards a small pop up will say "Unable to join the network". Please help. it's really annoying and frustrating.
Thank you Carolyn Samit, but nothing is working.
I've restored my ipod both to a backup and back to factory. I know the password is correct,
the router is the newest version (and it's plugged in and on), my ipod is updated, i've turned my wifi settings on and off, i've turned the ipod off and on. No luck yet. I've been working on it for hours now. About ready to sleep on it...maybe some luck will find me tomorrow...
Still in need of dire help. -
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
The previous responses did not say how to place in recovery mode or DFU mode -
how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl
Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?
I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.
-
my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
ipod touch will not connect to itunes @ work computer, but will connect to itunes @ home computer? why won't itunes see my ipod at work?
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
Maybe you are looking for
-
Can't install Vista through Parallel
When I tried to install Vista through parallel I recieved the following error: "This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact
-
I am attempting to use my Omni 27 as a monitor for a new desktop tower I have purchased, and it does not seem to be registering the input from the HDMI port. The buttons aren't working to switch between the normal input and the HDMI input, and I can'
-
Which is better database audit or database trigger ?
Hello , Hope everyone is doing well............. I have a doubt , which i have mentioned below ........ Plz help me on this .... Suppose I want to track all the actions that is going to be performed on a table (example -UPDATE), like 1-> which user h
-
Hi All, I have a bit of an unusual request. Each month we run an audit report for corporate marketing examining each instance where a PO was created after the invoice date. Now weu2019d like to examine the total # of these violations in comparison to
-
BAPI Extension for Purchase requisition
Hi All, I have to add a custom field in EBAN and have to enhance PR BAPI to include that additional field. What steps shud I follow? how can I use BAPI Extensions? Any help will be rewarded. Regards, Pragya