I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Similar Messages

I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.

I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

Have a static IP for internet access - how do I replace my Linksys wireless router with Time Capsule?

Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router. My provider uses static IP and DSL for internet access. I am replacing an existing Linksys router with the Time Capsule. The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS. The Airport Utility is not as straight forward as the Linksys setup. There is not a place to list gateway. Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved. Any suggestions would be much appreciated !

You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.

I am having issues with internet explorer showing my slide show ? does any one know how to solve this ?

I am having issues with Internet Explorer showing my picture slideshow it works perfect in Google Chrome and Mozilla Firefox however there is just a blank white box whenever I go to Internet Explorer I'm using a free domain for testing purposes
www.wethepeople.site40.net
Can anyone tell me how to fix this issue

Could you please try publishing the muse site to test Business catalyst site using publish button and check if you still facing the same issue? Please share the link to test Business catalyst site you have created.
Looking forward to your reply.

I have an MPEG4 movie running. I don't know why but Quicktime Player will not let me open this file now to shut it down. Any tips on how to do this? I've tried installing an older version QuickTime Player 7. OS Maveriks

I have an iMac with an OSX 10.9.5. I have an MPEG4 program that is running. QuickTime Player can't open it up for me to stop it. What are my options? I've tried downloading QuickTime Player 7, an older version but that hasn't helped.

Not sure what you mean then. Is QuickTime still open and playing the video? If so, do you mean you can't even get back to QT to shut it down?
Check the Dock for the QT logo. Click it to bring that app to the foreground. The menu bar then should say QuickTIme Player next to the Apple logo. Close the app and the video will shut down with it.

Connecting a cable modem, a linksys wireless router and my MacBook?????

So... My cable modem and MacBook work great when connected with an ethernet cable. How the heck do I hook up and configure my Linksys wireless router with my macbook and the cable modem? This seems like a simple setup, but when I hook it up it doesn't connect me to the internet.
Any help would be awesome!!!!

Darren,
The best advice I can give is to suggest you post in the right discussion group. This is the group for Apple Pages. You want the MacBook group.
-Dennis

Why wont my mac find my time capsule when hard wired with an ethernet cable

Im truying to connec to my time capsle with an ethernet cable and my macbook pro wont fnd it?

How old is the TC?
Is the TC setup to join a wireless network? If so TC turns off the ethernet ports.. strange but true.
If neither of the above.. it is just normal ML networking with wet string standard.
Reboot the TC.. Reboot the whole network.. restart in order.. modem, router. TC.. other network equipment.. clients.. (some of these are probably one and the same device.. leave 2min between each).

My iPad will no longer connect to my Linksys wireless router. Every other electronic device in our house connects just fine. What can I do?

I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

WRTP54G (wireless router with phone hookup) with Panasonic network camera BL-C30A (WEP only)

hi
I would like to use this wireless router with WEP so I can access the camera wirelessly (camera only does WEP encryption).
The camera should be the only device allowed to connect to this router wirelessly.
I can dedicate channel 11 so only this wireless router uses it
I know WEP can be cracked but I'm thinking maybe I can setup the router so it doesn't matter, i.e.,
so only the camera can be accessed through this particular router
so my questions are:
1. can I setup the router so only outgoing local LAN http requests are allowed?
2. any other suggestions on router setup that will prevent access to my network?
(using MAC address filtering (for camera mac address only) is worth doing but I guess MAC address can be spoofed so not a complete solution)
thanks,
Tom
Solved!
Go to Solution.

I think "toomanydonuts" has provided my solution in this thread:
solution thread
thanks,
Tom
Message Edited by coffee_addict on 01-03-2010 02:27 PM

Hi, I need help to secure my linksys wireless router, i tried the setup guide but i didnt work..

hello
I need help securing my linksys wireless router with speed boosters. In august me and some friends took over this rented house, and with the house we got their old internett system, we use a linksys router, This nett is open for everyone, but we want to secure it for other users. We didnt get the manual and i've tried the guide on your site but it says it cant be changed. The old owners didnt either know what to do. Is there some help i can get with this? Is there some buttom i can push to reset it and then make it possible?

Connect your computer using wire to router. Open setup page of router by typing http://192.168.1.1 in browser's address bar, and typing password as "admin" and no user name, if admin doesn't work reset router and do above step again. Go to wireless tab, here change wireless network name from linksys to any other name. Save the settings. Go to wireless security sub-tab here change security mode to WPA personal etc, and enter you secret key in passphrase/shared key, Save the settings.This secret key will be security key of your wireless network.

Linksys Wireless Router - Unusable internet and major packet loss

I installed a Linksys Wireless router at my friend's home and the internet connection is nearly unusable. About 1 in every 10 packets are lost between the router and internet modem. I have replaced this router with a 2 brand new routers of the same make and incurred the same problem (new ethernet cables and new power supplies as well). Even if wireless is disabled on the router, the same problem occurs. Interestingly, I tried a basic non-wireless router and there is no problem whatsoever. Any ideas on what could be causing the wireless routers to not work correctly?

First, connect your system up: EUM3005 -- WRT54GS -- computer. And in the computer, temporarily turn off your software firewall. Does this correct your packet loss problem? If not, then power down your system, and proceed with the following tests, and post your results:
Connect your computer directly to your EUM3005 modem. (Do not use the WRT54GS for this test.) Power up your system, and verify that you have a working Internet connection, then do the following:
In the computer, go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post all of your results, except post only the first half of your IP address. To copy the results to your post, highlight the data, then use the copy (Ctrl-c) keys and the paste (Ctrl-v) keys.
Next, power down your entire system, then connect the WRT54GS to your EUM3005. Connect your computer to the WRT54GS. Boot up your system. Go into the WRT54GS setup menu (at 192.168.1.1) and ping the EUM3005. Did that work? Next, in the WRT54GS, go to the "Status" tab, "Router" subtab. Look down the page to the area labeled "Internet", then post the following info from the page: "Login type", "IP address", "Subnet mask", "Default Gateway", and "Primary DNS" values, except post only the first half of your IP address.
Is the IP address the same from both tests?

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

Similar Messages

Maybe you are looking for