I am trying to connect my Canon MG5220 and its not connecting to my macbook running lion?

i am trying to connect my Canon MG5220 and its not connect to my macbook running lion? i updated the drivers to 10.7 lion and i reconnected the printer to my wifi which both devices are connected to. when reinstalling the drivers, it will not connect. using Canon IJ Network Tool cant find the printer it always comes up with
The printer could not be detected. Please confirm the following:
- The network settings are correct.
- The printer is turned on.
- The printer is not used from another computer.
i have turned the printer on and off, its not connected from another computer, and im almost 100% sure the network settings are correct

Syncing with iTunes
How to transfer or sync content to your computer
If your contacts are in a supported appllication or cloud service, the above will allow for syncing them to the iPhone.

Similar Messages

Why is my itunes trying to update my iphone and its not connected to the computer?

This would be more for the technical side of the house, but why would the system try to update my iPhone and its not connected to the computer? is there a bug in the system?

Update or sync?
As of iOS 5 updates and sync can be done wirelessly, over Wi-Fi.

My iphone 5s is disabled and its not connecting to itunes

hey,my 5s is disabled and its not connecting to itunes and its not taking my fingure print.what can i do now plz help me out.

http://support.apple.com/kb/HT1212

Update window show "connecting to update server" and will not connect.

Software Update window shows: "Downloading Firefox" and under the blue barber line "Connecting to the Update Server".... this has been going on for several hours and it does not appear to be downloading the update. I have been trying for several weeks with the same problem.

I have already tried re-installing the newest version, and I still get the "update" alert, and the not-connecting.
At the moment, I just close the window and carry on, but it's a bit annoying.

Wi-Fi loosing connection every few seconds on my macbook pro and its not my router's fault (running yoseomite)

Basically I bought my new Macbook Pro retina display in September 2014. My wifi was working perfectly well for about a month or two until Yosemite was brought out. I'm not sure if it was immediately after I downloaded Yosemite or not, but not long afterwards I noticed I was having trouble with my wifi (and not just mine but my schools as well). Every time my computer tries to join the wifi network it will work for a while (5 seconds) and it will say that I have a wifi connection but then it will just stop working and it will say I'm not connected to wifi. A few seconds later and it will then reconnect and say I have wifi. I am fairly certain this is not my wireless router ( a BT home hub) as I have other devices such as my iPhone and a computer which does not suffer these problems. After a while of it loosing connection and then gaining connection it will finally stop and the wifi icon at the top will suggest I have a wifi connection but when I hover over it, I see it says "Wi-Fi:looking for networks..." and then 2 seconds later it will say "Wi-Fi: On" and it will repeat like this for however long I am on the network. When the icon appears to suggest I have a connection I am able to load a webpage but it is slow and watching Netflix can be tiresome. I've scoured these forums for information that will solve my issue however all I have found is outdated information from 2010 or 2012 or too technical information that I can't understand. Does anyone else have this problem, has anyone else found a solution, it would be much appreciated if any one could help me solve t.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

I Get error message -3221 when I try to connect to iTunes store and can not connect

I had just updated iTunes when I started getting -3221 message and unable to connect. I show my firewall allows iTunes but Can not figure out why it is not working.

have a look at:
Possible iTunes Store errors
iTunes: Advanced iTunes Store troubleshooting

I can't find my iphone and its not connected to icloud

i really need help its not mine its my friends and shes letting me borrow it for the week help!

If you have previously set up/configured the FindMyIPod service in the iPod's settings, you might be able to track it that way by going to www.icloud.com and signing in with your Apple ID. Then click the FindMyiPod icon. This also requries that the iPod Touch be still powered on, connected to a nearby Wi-Fi network whose location has been correctly entered into Apple's location database) and not have been restored by somebody else who my have located the device.
Otherwise, I'm afraid you are out of luck and will need to look for it as you would anything else you lose. You should report the lost item to the local authorities and change any and all passwords to any accounts you may have set up or accessed with the device. Apple can do nothing to help.
Reporting a lost or stolen Apple product
B-rock

I just bought a Canon PowerShot A2400 IS Digital Camera and its not showing up in OS X Lion when connect by USB

Can someone please help with this. Thanks. I have tried to find drivers but none are availble on the Canon site.

Do you have iPhoto installed? If you do, you can set it to recognize the camera. iPhoto / Preferences / General
This is what it looks like in OS 10.8.2. The key is the line "Connecting camera opens:" There may be other Applications listed as well, depending on what is installed.
To my knowledge this works with any camera.

TS1538 after trying to update my iphone displays connect to i tunes and will not connect

when i tried to update my phone it would not complete, and now only shows connect to itunes
computer nor itunes sees it when I plug in to usb

Try a different USB port, if iTunes still does not see the device - try another computer with iTunes on it also may need to make sure computer and iTunes is up to date as well as may need to uninstall and reinstall itunes

My Ipod touch says connect to iTunes for usage and its not connecting. What do I do?

I have an iPod 4th generation Touch. I dropped it in water and it reset itself. The screen says to connect with iTunes to be able to use it, but the iPod will not let me connect with iTunes. What do I do?

If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

HT4061 i had a request yesterday to update ios now my phone is stuck with the screen showing the charger with an arrow pointing to an i tunes symbol. i cannot press or touch i had a request yesterdayanything and its not connecting via my laptop using the

i had an request yesterday to update ios7 i did this and now my phone seems to be stuck with the picture on the screen of the charger pointing to the symbol i tunes. i cannot tap the screen to go anywhere else and even if i connect to my laptop via the usb still nothing. can anyone help plz

Hey robthetiler!
Try the steps in the following article to resolve this issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Regards,
Braden

My iPad mini Its getting overheated and its not connected to the charger, it start next to the home button, and expands a few inches.

This just started, i have like 9 months with it, it starts nexo to the home button then it expands, really hot,

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the iPad > iTunes: Restoring iOS software
If that doesn't help, unless you purchased Apple Care (extended warranty), the one year limited warranty is stil in affect. Take the iPad to an Apple Store or Apple certified repair provider for service > Apple - Find Locations

HT4113 my ipad is locked i forgot password and its not connecting to itunes

my i pad is locked i forgot password , on screen its saying conact to itune but its not conactin its asking for password wich i forgot

Forgotten passcode
http://support.apple.com/kb/HT1212

I just got the av connections for my I phone and its not working on my tv

ok I just bought a set of av cords at the apple store, and when I got home tried to book up my tv and its not working iv tried everything I can think of

Your text is not clear: you wish to connect to the internet, and you cannot do that? or you want to share your internet connection, to be used by other computers, and you do not know how to do this?
The title of your thread indicates the latter (this is the meaning of share), but your text rather indicates the former situation.
In order to share net, you must first mac connected to the net up and running, but I understand you did not get to that point, right?
Please be clear.

I could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5.

i could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5. how could i connect wireless?

Contact Canon tech support or visit their support site for assistance as well as downloads of compatible drivers for Lion or later.
OS X Mavericks- Set up a printer
OS X- Printer and scanner software available for download

I am trying to connect my Canon MG5220 and its not connecting to my macbook running lion?

Similar Messages

Maybe you are looking for