I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

Here's the Apple Support article on Target Mode http://support.apple.com/kb/HT1661

Similar Messages

HT1750 I tried to restore my iMac with my MacBook Pro Cd's but the computer say that the cd is not supported on the iMac,Now it does come out because there's no eject button on the screen.How could I take it out an how could I install the OS X Lion ok wit

I tried to restore my iMac with my MacBook pro CDs but it's seem it got restored but it say this cd is not supported on this iMac, What could I do to take out the disk?

Also, if you have Lion on the computer. You have a recovery partition on the drive. On startup hold down 'Control' to bring up your startup menu. Select "Recovery HD". That's how you get to it. Lion's recovery partition acts as the installation discs that came with all previous versions of OS X.

Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html

I have been fighting a losing battle with iDVD. What is the latest version and how can I obtain it?

I have been fighting a losing battle with my copy of iDVD. What is the latest version and how do I obtain it?

The latest and last version of iDVD is 7.1.2. iDVD 7 is included in the boxed disc of iLife 08, 08 and 11. You can get copies of them at Amazon.com.
The History of iLife
Version
Intro
Cost
OS
IPhoto
iWeb
iMovie
iDVD
iTunes
Garageband
iLife
01/03/03
$49
10.1
2
3
3
3
iLife 04
01/06/04
$49
10.2.6
4
4
4
4.2
1
iLife 05
01/11/05
$49
10.3.4
5
HD 5
5
4.71
2
iLife 06
01/10/06
$79
10.4.3
6
1
HD 6
6
6.0.2
3
iLife 08
08/07/07
$79
10.4.9
7.0
2.0
7.0
7.0
4.0
iLife 09
01/06/09
$79
10.5.6
8.0
3.0
8.0
7.0.3
5.0
iLife 11
10/20/10
$49
10.6.3
9.0
3.02
9.0
7.1
6.0
No matter what iLife version you purchase you'll need to run the latest updater which is availalbe from the Apple Downloads webpage.
OT

Trying to connect an iMac with an e-Mac via Linksys

We are trying to connect my son's eMac with our iMac using a Linksys Wireless-G broadband router on the iMac and a Linksys Wireless G USB adapter for the eMac. We cannot seem to get it going. The router is connected via ethernet to my computer with no problem, we just can't get the eMac side on board. I tried plugging in the same network info from the iMac into my son's computer, but that wouldn't work. Neither computer has an Airport card.
We really know nothing about networking-zero- and the setup disc is of course only for PCs.
We really just want to share an internet connection. Is there any tech document out there that can take us through this step-by-step? Did we just buy the wrong stuff? My son is suffering from iTunes withdrawal and I really need some help before my husband starts drilling holes in the wall. Thanks!

Maria, Welcome to the discussion area!
Unfortunately you need the proper driver before that USB device will work with your eMac. Because of the need for drivers, USB wireless adapters are notoriously unreliable when used with the Mac OS.
The best solution is to get the proper wireless card for your eMac. Depending on the model of eMac, it may require the original AirPort card or it may require the AirPort Extreme card.
Another possibility is a Ethernet wireless adapter. These require no drivers and therefore will work with any Ethernet device. Examples of Ethernet wireless adapters are the Linksys WET11, Linksys WET54G, and the Buffalo Technology WLI-TX4-G54HP bridge.

My screen continually freezes up. I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
You can read about restoring the software here.
iTunes: Restoring iOS software - Support - Apple
Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
You should read this first before you restore from either backup.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
This is a must read before you erase the iPad should you decide to go that route.
iOS: Understanding 'Erase All Content and Settings' - Support - Apple

I'm trying to connect a subVI with my VI, they both share common variables and the subVI is not reading one of the variables from the main VI...

I can't figure out why the subVI will not read this one particular variable from the main VI. How can I figure out how to make sure these two VI's are communicating properly?

Yes, please post example.
We could probably give you an answer rather quickly if you did.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

TS3988 I just bought a used iPad and reset/restored it to its factory settings. Im trying to connect to iTunes with my macbook but don't have the apple id or password that was used to activate it originally. What can i do to activate it or to bypass activ

How can i activate without previous owner's apple id and passsword or bypass activation so i can use it??? Please Help...???

Hey IROCZ,
Thanks for the question. The following resource may provide a solution:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Thanks,
Matt M.

HT203167 tell me why i can't buy music with itunes card What is the security questions and answers Why is it so complicated to buy music??

I.m trying to buy music on my iphone 5s but it's so difficult
can't remember that l ever answered any of those security questions?

Go to > Apple - Support - Product Selection
Click iTunes then click iTunes Store
Then select Account Management
Then select iTunes Store account security
Explain the issue.
Select your location
Click Email
Should hear back within 24 hrs.

I would like to transfer my itunes library on my pc to my wifes Imac which has her itunes library on it. Is is possible to do this and have two separate librarys on one imac? If so, what is the best way to transfer it?

Is it possoble to transfer my itunes library from my pc onto my wifes Imac which has her itunes library and establish two accounts on her Imac? If so what is the best method to accomplish this? I have a itouch player.

There are many ways to accomplish this, depending on how you want it. Setting up multiple accounts is easy under System Preferences:Accounts. After that open iTunes on your newly created account.
Now, is where you could do a couple of different things. If your PC is sharing the same network and you are able to see the files on the PC from the iMac, then just drag and drop the iTunes Library music folder structure (just the part that contains the actual music) into the iTunes window. If you can't access the PC files, then you need to copy them all to an external hard drive, and import them w/ the same method.
If you don't want to create a second root-level account for yourself, but want to keep the music library separate, create another iTunes Library. You do this by holding down the Option key while starting iTunes, then click on the Create Library option. Then import the music using either method above.

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

I am trying to connect my HDTV to my MacBook Pro using a Mini Display Port to HDMI and the TV seems to not be receiving any signal. Is there something wrong with my TV or Adapter?

Whenever I connect the minidisplay port to the HDMI cable, my MacBook Pro screen turns blue for a moment and then nothing shows on my HDTV. I have tried to "detect displays" with each resolution listed, but none seem to work with my tv. Is there any way to fix this issue?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

I just got an iphone and am trying to connect it to my itunes account. Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started. How do I start it? Have already been back to the store with it and no change

I just got an iphone and am trying to connect it to my itunes account. Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started. How do I start it? Have already been back to the store with it and no change.

http://tinyurl.com/3hs3g2u

Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

I live in Japan,
I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

Similar Messages

Maybe you are looking for