I am trying to do a clean install of Snow Leopard on an Intel Macbook Pro. (Need to partition for Boot Camp)  I have done it in the past so I know it works but whenever I select the install disk as the boot device it gets stuck on the Apple logo/pinwheel.

Prety much what the question says. HELP!

stephenfromlynchburg wrote:
No the mac had come with Leopard. Then I bought the snow leopard DVD and did a clean install of snow leopard.
If you just stuck the disk into the Leopard Mac and run the upgrader, you didn't do a "fresh install" you basically upgraded from 10.5 to 10.6 leaving all the programs and files intact.
The white Snow Leopard disk was the right one for that machine as it had Leopard (10.5) on it previously.
So you already have Snow Leopard installed, if you want to erase the entire drive (along with all your programs, files and OS X) and want to install Snow Leopard again, you hold the c or option/alt key down and boot the machine off the disk. Then use Disk Utiltiy to erase the entire drive, then quit and install Snow Leopard.
How to erase and install Snow Leopard 10.6
Once Snow Leopard is installed you log in and use Apple Menu > Software Update until clear to get to 10.6.8 and fix security issues.
Now I can't get it to do the install again.
To install Windows into BootCamp, you read and run the BootCamp Assistant located in the Applications > Utiltiies folder
It's important to change the drive format from FAT32 to NTFS before installing Windows using the Windows disk.
Windows is rather complicated to install, if you boot to a blinking line with "press any key to continue" you need to press and hold the power button down and reboot holding the Option/Alt key down to get back into OS X.
https://www.apple.com/support/bootcamp/
If your Windows programs are not going to be as CPU/GPU demanding, you may rather prefer to use a virtual machine instead
Windows in BootCamp or Virtual Machine?

Similar Messages

  • HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

    I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
    Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    that's a step by step walkthrough.

  • While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    Does the disc look like this DVD?

  • I have just upgraded my 2 apple computers to OX Lion and my macbook pro is having ip address issues. I have manually changed the ip address, renewed lease which works but everytime I switch on it does not connect to wi fi until I edit the ip address.

    I recently upgraded to OX Lion and have an ipod, ipad, iphone and other apple mac computer on the network besides my macbook pro.
    Since the upgrade I am having issues with my ip address. I have edited this number under renew lease, taken it to a manual edit and on any of these occassions found an address which allows the computer to go on wi fi.
    However everytime I use my computer it starts off without wi fi and I have to manually go back to ip address and either adjust to manual or renew lease.
    Any ideas?

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Trying to re-install Snow Leopard over Lion and Macbook Pro is beeping like a memory failure

    I installed Lion on my work 15" MacBook Pro i7 to give it a go, and it's not working with the system we use for Active Directory login, so I need to roll back to Snow Leopard.
    I don't have a Time Machine backup, but I have pulled all the data I need from the machine, and have wiped the hard disk ready to reinstall Snow Leopard.
    I have a retail copy of Snow Leopard that I've recently used successfully for fresh installs on other machines, but now once I insert the DVD into this machine that's had Lion on it, it's not responding and just making alarming BEEP BEEP BEEP noises.
    I googled that and it might be bad RAM (possible, but unlikely? the machine has been running very well up until now)
    I've wiped the PRAM, but the instructions for wiping the SMC are a bit cryptic for these machines ...
    Does anyone have any clues as to what might be causing this? A firmware issue of some sort?
    Maybe the hidden EFI partition on the drive won't let you install Snow Leopard over a disk that's had Lion?

    Might be some useful info here:
    http://forums.macrumors.com/showthread.php?t=1175934
    " I used target disk mode to install Snow Leopard on its partition. I used a friends Macbook Pro, but I put my machine into target disk mode and ran the installer from his user account and optical drive. From a couple things I read online, it seems that Apple recommends putting the other machine in target disk mode and doing it the other way around. I guess some critical files might not have been installed? I also used a retail copy of Snow Leopard instead of my grey recovery disk, so that might be it too. "
    "Your machine is newer than the retail copy of Snow Leopard. Use the restore disks it came with.
    The installation will need to be done from your machine. You may need to do a net install, so look at "Remote Install Mac OS X" in Utilities."
    I'm currently installing from the macbook firewired to the other machine as recommended so hopefully that might help

  • Trying to install software from iomega to my new macbook pro need help

    Need help trying to install software from an iomega to my new macbook pro.....any help appreciated.

    Contact their tech support department since it's their product, not Apple's.  Did you read the user manual?  You make no mention of doing so.

  • I am installing windows 8 on MacBook pro- and it asked me to reboot, I have done that and now not working. Please help, I am installing windows 8 on MacBook pro- and it asked me to reboot, I have done that and now not working. Please help

    The computer then shut down then came up with the message No bootable device---insert boot disk and press any key.  I have inserted the disk and nothing is happening.  Any ideas?
    Thanks in advance.

    Bootcamp will support your MacBook Pro, and 32 bit versions of windows 7 for sure. To find out if you can run 64 bit versions go through the boot camp assistant on your mac, partition the disk, and it will list compatible operating systems. Windows 7 will still work even if it's not there.
    You can find the type of ram by going to About This Mac in the Apple menu and clicking on More Info…
    Your hard drive will be 2.5" sata drive, though I'm not sure if it's user replaceable on that generation. My friend has a similar one and I think only the ram and battery can be changed on his. Good luck!

  • Can i install snow leopard on my new macbook pro

    I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

    Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
    You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link).  Units from pre-July and last year can be found, and come with warranties just like brand new.

  • Anyone install Snow Leopard on a 13" MacBook Pro and have any issues?

    Just wondering if anyone is this forum installed Snow Leopard on a MacBook Pro 13" and what occured if any?
    just want to know to really think before i upgrade.... getting really tense about this after seeing all these problems that are not only happening to third party apps but to the acctual system and native apps (safari, itunes, etc) Kinda Scared... i know Apple is a great company and does great things never imagined and im a big fan for 6 years when i was little, so i was surprised to see so many problems after release...

    I am having a similar issue. I have upgraded my Mac Pro without any issues. However, my MB Pro has told me that the install was successful and was to restart. Upon restart the machine passes the initial boot (Apple Logo and Spinner) then it presents a black screen and will not complete the boot to the login screen. The fan is running, if I close the lid it tries to sleep, but does not appear to sleep. It is on and the light is solid (no pulsing for sleep).
    I booted in verbose and the messages all looked good and then it posted the last messages to fast to see and it went to black screen.
    Very Frustrating....

  • New Macbook Pro: Need to Partition Hard Drive & Install Windows 7 - help!

    My macbook crashed and I just got a new macbook pro (4GB). I run Fusion 3, but I need bootcamp for a program required for my law school exams. I have a full version of Vista and an upgrade for Windows 7 Home Premium.
    Should I install Vista first in Bootcamp and then upgrade to Windows 7 or just skip Vista and install Windows 7 using the upgrade disc only?
    If you could help or direct me to someplace that answers this question, I would greatly appreciate it! Thanks!

    Hi,
    I have not yet done this on my macbook pro, but I plan on doing it this way when I get an afternoon to myself. I would follow the link below. You can use the windows 7 upgrade disc to do a clean install. That way you don't have to worry about vista at all.
    http://www.winsupersite.com/win7/cleaninstall_upgrademedia.asp
    That link will explain the proper way to do it and it is completely legal and it will satisfy Microsoft's license requirements providing you own the upgrade disc and the Vista disc as you described.

  • Do i need to install snow leopard on my new macbook pro?

    i picked up a new macbook pro and it came with snow leopard. i don't know what the snow leopard will enhance and if i should even install the program.

    Your MacBookPro comes with Snow Leopard pre installed. It's not a program, it's an operating system. Mac OS X - Snow Leopard.
    You might benefit from viewing these videos.
    http://www.apple.com/findouthow/mac/

  • Can I install Mac OS X 10.6 (Snow Leopard) on my new MacBook Pro?

    Hi all, I'm user of Mac since lot of time and I`ve got a question. I have bought a Macbook Pro on September 2011 and it cames with Lion and no installation disc. Can I downgrade this Macbook Pro with Lion preinstalled to Snow Leopard with SL Retail disc?

    Not with a retail disc — it doesn't contain a recent enough version of Snow Leopard to boot the machine. You'll need to obtain duplicates from Apple of the discs that would have been shipped with your machine before the release of Lion. Call Customer Relations at the number below and ask to have them sent to you for a small fee.
    1-800-767-2775 (USA only. Outside the USA, call AppleCare)

  • Can i install snow leopard on my new macbook pro which came loaded with Lion?

    My new MBP came loaded with Lion. Can i install S.L. on it?

    Don't install a version of Mac OS X earlier than what came with your Mac

  • I Installed windows 7 on my macbook pro 13 inch Late 2011 with bootcamp, i have no wireless icon or bootcamp icon, i checked my flash drive and it is blank!! what do i do?

    i Installed windows 7 on my macbook pro 13 inch Late 2011 with bootcamp, i have no wireless icon or bootcamp icon, i checked my flash drive and it is blank!! what do i do?

    Download and intall the Windows Support software. You can start Bootcamp Assistant again and only select the option to download the support software. Then follow the instructions to save and install the support software.
    Or, manually download the support software here http://www.apple.com/support/bootcamp/downloads/.

Maybe you are looking for

  • DVD Region Code

    Problem: Most of my DVDs have the Hong Kong region code (whatever it is) and my macbook will not play those dvds only the north american region coded ones. Is there some kind of codec to let me play these other DVDs which make up 95% of my DVD collec

  • My TC won't startup with ethernet cables connected.

    It will start up fine w/out ethernet cables, but with ethernet, it won't startup.  I have two wired connections, my thunderbolt display/mbp and my cannon printer. It will sit with amber light solid. When I disconnect the two ethernet cables, it will

  • Waiting for sprint note 4 pre order

    Pre ordered device on Oct 15,was told it would be there release day the 17th. Come to find out it still hasn't shipped. I called 1877 bby mobile number and they called the store and was told they will not be receiving any this week. So now another we

  • Toolbar not displaying in Internet Explorer window

    I have several machines running Adobe Reader 9 which do not display the toolbar when displaying PDF documents in a browser.  These machines upgraded last week from an older version where the toolbar displayed.  Any ideas how to get the toolbar to dis

  • Will the AVCHD format from the Lumix FZ100 work with iMovie?

    I'm looking to buy a camera, the Panasonic Lumix FZ100, but was wondering if the format AVCHD works with iMovie? I intend to use it for vlogging and don't want it to overcomplicate things.. Thanks