I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH
Similar Messages
-
I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?
It means what it says - it's not compatible with modern Macs. You need to buy a current version.
Mylenium -
As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.
The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2) -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Time machine is not working under "Applications". I get this message: You can’t open the application “Time Machine” because it may be damaged or incomplete. What do I do?
Time machine under system preferences lets me setup time capsule. But backup fails because "Volume is in use" Help please!It does sound like you have a corrupted install.
The volume in use error is something we see all the time.
Look at C12 here. http://pondini.org/TM/Troubleshooting.html
But I suspect you have more serious issue.
I would run a disk verify on your local OS disk. A5 in the above reference has some info. -
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?GrandmaGG wrote:
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?
Do you have iLife '11 Discs or did you download it from the App Store? -
I spent ages digging out the disc as it was installed on my old iMac and it clearly states that it does not require a Power PC.
I also tried upgrading to imovie 11 but all my old movies won't import.
I've heard from others in these forums that iMovie 6 is the only way to resolve this and people have described how they are running it on Lion.
So how can I get iMovie 6 to run?Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)
You will find that the above applies to any PPC-only software including old iLife. You can purchase the new iLife versions on the App Store. -
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
GiraffeHero wrote:
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
Ralph Landry1 wrote:
The only viable solution is to upgrade to the latest versions of the PPC legacy software that will run under Mavericks.
Except for the other viable solution:
If you are unable or unwilling to upgrade to a version of Filemaker that runs natively under Mavercks, you can run your existing version of Filemaker by installing Snow Leopard Server into Parallels:
[Click on image to enlarge]
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564 -
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales.. -
Have can't open iphot because power pc apps are no longer supported
I recently burned up an 8 year old Mac (all in one machine) for lack of better terminology.
It was replaced with a MacMini so I could connect to an existing monitor.
Upon launching, I have an error, when I open iPhoto or iDVD, etc that says: Can't open Iphoto because power pc apps are no longer supported.
What do I need to do now?
I'm assuming the software I had originally on my old machine is outdated? But I also thought it was pre loaded with all the basic stuff.
AS you can tell I'm not the biggest user............ but I would like to be!Sounds like someone restored your programs from you old PowerPC-based system to your new system, probably running OS X 10.7 Lion or 10.8 Mountain Lion. Apple dropped the capability to run PowerPC-based code in these systems. You can go to Launch pad and access the App Store to buy updated versions of the iLife programs. However, iDvd is no longer available from Apple. You can buy iLife in a box from sources like Amazon.com that will have iDvd included, and possibly even by calling the Apple online store at, in the US, 800-MY-APPLE. Ask for the latest version of iLIfe with iDvd off the legacy products list.
You probably should click on the apple on the left of the menu bar, click about this mac, more info, systems report, and applications (which will take a few moments to display). Click kind to sort the list. Any programs that say PowerPC won't run under 10.7 Lion or 10.8 Mountain Lion. -
Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?
PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"
You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.
Maybe you are looking for
-
How to call RFC in Async Mode using TCP/IP RFC Destination ?
Hi experts, Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ? Regards, Umesh
-
Other people must be facing this problem as well - I don't have a computer I can download iTunes on. I have an older home computer that won't work with iTunes (windows millenium anyone?). The security and network guys are coming down on non-company s
-
./dbca not working in LINXU REDHAT 9. HELP
HI, I INSTALLED NEW REDHAT 9 LINUX SUCCESSFULLY, AS MY SYSTEM CONFIGURATION IS P4, RAM 256,HD 40GH. I TRYIED TO INSTALL ORACLE 9I (9.2.0.4)DATABASE. INSTALLATION GOINE NICELY WHAN DATABASE CONFIGURATION STARTED ONE MESSAGE CAME "ONE OR MORE TOOLS HAV
-
Change in multiple classification through ECR
Dear experts, We are using class type 050 (Reconciliation) for the classification of material BOM. I have assign two different classes (but same class type i.e 050) to a material BOM. but whenever I changes the classification data in reference to an
-
Hello I have an N79 and its the first time i am using an N series phone. In fact its my first mp3 phone, so pls bear with me if this sounds pretty dumb. Lately i synced some songs and also added some ringtones in the default "Ringtones" folder. Probl