I am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk
i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk
Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
sudo chflags 0 /Volumes/
Then, copy & paste these next two, one at time, into the window and hit the return key after each:
sudo chmod a+rx /Volumes/*
killall Finder
Quit the Terminal app and try installing again.
Similar Messages
-
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
My iphone 4 screen black out suddently! I tried to restore to factory setting but still nothing show up on screen! Anyone can help?
1st, u could just restart ur home, pressing the home and power botton together for few sec,if it wont work .....
2nd, try restore ur phone with itune, and it ****** me off last time when i dont normally backup with my itune after the icould thing showup, so restore with icloud backup wont 100% work, if not just try restore from older icloud backup. if it still wont work.....
3rd hand it over the the apple dealer... they are the pro... never ever open it up urself or bring it to one of ur so call SMART FRIENDS, they will freak up ur phone even worst.... i think this method will definately solve ur problem.. -
Trie to install new garpahic FW update on my HD2400XT but says dont need it
Hi
I read there was an firmware update for the HD 2400 XT graphic card, from Apple see below
About iMac Graphics FW Update 1.0.2
This update is for iMac computers with an ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card installed, running Mac OS X 10.5.2 or later.
"It updates the graphics card firmware on the ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card in the iMac to improve system stability"
Here is the snapshot from my system profiler
"ATI Radeon HD 2400 XT:
Chipset Model: ATI,RadeonHD2400
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x94c8
Revision ID: 0x0000
ROM Revision: 113-B2250A-207
EFI Driver Version: 01.00.207"
I tried to run it, but then says, your computer does not require this update?
why is this? why wont it install?
cheersUnderstand what your saying but in this case I don't think you're right. The installer log gives the following message:
Installer[1299]: Package Authoring Warning: Package reference does not include required hash for package id auto.
Also I have yet to hear of anyone being able to install this update. Seems to me that if they are going to post it there probably ought to be some computers out there that actually need it. -
When i was at school I left my Ipad at a table and forgot it but i realise it when i got out of the room it was in the cafeteria it only took like five minutes for them to stole it. i had find my iphone app but it seems they turn it off or restore my Ipad. is there a chance i can track it with just the serial number?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
Cheers, Tom -
I backup my iphone onto itunes on my laptop. Recently I got a new laptop, so that counts at two itunes locations.
Unfortunately this new laptop was faulty and had to be set up again from scratch.
Apple now says that's three itunes locations when in fact it's two.
How can I get this changed back to two locations?If by locations you mean "authorized computers" then one of your computers (apparently the new laptop) may be using multiple authorizations.
To check on this and correct see here: http://support.apple.com/kb/HT1206 -
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart. -
I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?
What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.
-
hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net
I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
Trying to install new upgrade to my iphone 4 and it put the phone in recovery mode. How do I get it out?
i have this problem too! have you fixed yours yet?
-
My iPad is stuck--when I tried to install new IO7 (auto-invite) it stuck at the Agree/Disagree page. How do I get it going, get unstuck, or dump the new OS?
Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
trying to install new software for OS mavericks and i get the the product distribution file could not be verified. It may be damaged or was not signed error message
.can you assistWhat "new" software?
Barry -
I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise
Go to Setings>iTunes and App stores and make sure you are signed into your account
Maybe you are looking for
-
How to use SET ID in select statement of SQ02
Hi, I have a infoset, where for one of my Zfield, i have writen a select statement in order to get my ouput. if aufk-aufnr = 'XYZ'. select sum( FKBTR ) from fmifiit into zfmifiit where fikrs = aufk-kokrs and fipex IN capex and wrttp NE '51'.
-
Sub folders and Process multiple files in Photoshop Elements 10
I am looking to apply the same adjustments to numerous images in numerous sub-folders and overwrite the original images. Using the Process Multiple Files options, I added the main folder (which contains no images) to the Source field, selected the I
-
ActiveX Viewer on IE displaying grey screen
We are running crystal enterprise XI rel2 with FP4.7. When running reports via infoview or the crystal management console, reports display. but when running the reports via a java app through the webcompadapter, the reports only return a grey screen.
-
Calling a screen in a user exit!
friends, Is it possible to call a screen (Normal or modal dialog box) to display an error message or some 2 or 3 lines in a user exit? thanks all
-
If a number is blocked on an iPhone is it also blocked on the iPad it deals with?
If a number is blocked on an iPhone, is it also blocked on the iPad associated with that number?