I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006  via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Similar Messages

  • Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    I ran the adobe cleaner and that did not help. I then uninstalled norton antivirus. and that solved the problem and I was able to install photoshop cs3. I than reinstalled norton antivirus. My system seems to be fine,

  • I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    Apple only supports Windows on certain hardware.
    http://www.apple.com/support/bootcamp/
    Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
    It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
    Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
    http://refit.sourceforge.net/
    This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
    I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
    There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

  • ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

    Hello Everyone,
    I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS  2011 Standard.
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    the provided link says  "There is no additional information about this issue" i am helpless
    please tell assist.
    Thanks.
    Abdallah.M.M

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    windows vista home premium service pack 2。error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.

    I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.

    I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • I'm trying to install CS2 on a mac OS X 10.9.4 but get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported.

    I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?

    It means what it says - it's not compatible with modern Macs. You need to buy a current version.
    Mylenium

  • HT4623 in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyo

    in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help

    stell80 wrote:
    in settings and then general i do not have the option of software update...?
    That is only present if you have already updated to iOS 5 or later.  If you're on iOS 4 you can only update while connected to your computer's iTunes.
    stell80 wrote:
    How do I know if I am on IOS6
    Settings/ General/ About
    stell80 wrote:
    I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
    You can't access iCloud from your iPhone unless you're on iOS 5 or later.  Otherwise, refer to this article:
    http://support.apple.com/kb/HT4436

  • "The installer could not copy the necessary support files." Error message on 0S X 10.6.3 Install

    I have just wiped my iMac 21.5' Core i3 3.2GHz as I am going to sell it. This process went as expected but when I try to reinstall the OS from the disk that originally came with the system (10.6.3) it gets around 30% into the install and then produces the error message "The installer could not copy the necessary support files." No matter what I try the outcome is the same and the installation fails.
    I did have the hard drive replaced on this iMac a couple of years ago as it was of a batch that apple said could go pop one day. Do the hard drive and the OS X disk that comes with the system have to match, or is it just a case of a faulty disc? Any help would be greatly appreciated.

    Hi sonicdeathmonkey1882,
    If you are having issues reinstalling the OS on your iMac, you may find the following articles helpful:
    Apple Support: Troubleshooting Mac OS X installation from CD or DVD
    http://support.apple.com/kb/HT2956
    Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
    http://support.apple.com/kb/ts1394
    Regards,
    - Brenden

  • Tried to install mavericks on another mac from my purchases but not downloading

    Tried to install mavericks on another mac from my purchases account, but get to say downloading, and drops installing icon into the dock, but left overnight and didnt download anything. Previous mac took 12 hrs to expected a long wait, but this didnt even give me the downloading bar and time remaining. How do I not use the one in my purchases, do I need to download under someone else apple id?

    Mavericks downloads into the Applications folder, where you can install it.   Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer.   Failing that, try contacting Apple Support.

  • Install Failed. Installer could not copy the necessary support files

    I replaced the hard drive in my MacBook 13ac OS X" late 2009. I am trying to reinstall th OS and applications from th CDs that came with the computer. When I start the computer and try to install the OS, it starts to install, after about 2-3 minutes I get the following message. Install Failed. Mac OS X could not be installed on your computer. The Installer could not copy the necessary support files. Click restart to restart your computer and try installing again. I have done this several times with no luck. Is the CD missing something? Is there another way to do this?

    Disconnect any attached hard drives.
    Boot off the disk and try running Disk Utility Repair Disk and Repair Permissions. If that is successful, try to re-install. If that doesn't work boot off the disk and use Disk Utility to erase and reformat the drive as Mac OS Extended (Journaled).

  • After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

    After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
    Thanks

    Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
    What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
    Can you help me? Thanx

  • HT4623 My iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

    y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

    Try and force iPad into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

Maybe you are looking for

  • Randomised Restore!!!!!!

    I have a newly manufactured 2nd ipod touch 8gb and itunes now thinks it is in the middle of restoring. it shows the screen with set up as new ipod and restore backup. My ipod is in it's normal state with games on it and i can still use it. i can't sy

  • Photoshop elements 7  Help menu

    Does anyone know why the Help Menu on Photoshop elements 7 is no longer working?

  • No digital audio in/out - help

    Cannot establish a digital audio out/in connection. Stuck in analog mode. When I plug in a mini toslink the audio OX driver audio device indicates "headphones". There is no red signal being emitted from the optical cable either. Cable checks out ok o

  • CDI-23564 error when generating FORM.

    Hi, After installing Designer 6.0 and Patchset 1 (6.0.3.5) ,when generating FORM , system always prompt that it could not load CFG60.DLL. Had check that CFG60.DLL exists in orant/BIN and also in Window registry. Reformatted hard disk, change hard dis

  • NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL values

    sir, PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY). My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct t