I am trying to print to a dell printer and need a good app

Does any one know of a good app to print to a dell V313W wifi printer from an ipad 2?

You might want to try Airprint Activator. Free/Donationware. Works really well for me.

Similar Messages

  • How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    Vera,
    Use View > View Options, and set 'Sort By" to "Manual Order."
    Then you will be able to drag-n-drop songs up and down the list.

  • I am trying to print and only blank pages and codes are printing?

    My family have recently got a FujiXerox DocumentCentre C240 and I am trying to print to it. I have downloaded the printer software and added the printer through the IP address with selecting the right printer software. The printer says it is installed corrected and when I go to print it starts printing pages with a codes of what I'm trying to print at the top as well as lots of blank pages after.
    What can I do to make this work and print what I want it to print?

    Contact FujiXerox

  • Safari is trying to "print" and it won't let me force quit or force restart

    I tried to print something yesterday, but it keeps trying to reload the page and goes to the printer page which doesn't allow me to regularly "quit" the program.
    Here is what I've tried:
    -Opening Force Quite indirectly...does not allow because it thinks it's trying to print
    -Restarting the computer...does not allow for same reason as above
    -Force Quitting the computer (holding the power button)...it says the computer is already restarting because I tried above first.
    I can't open any other window in Safari either as the one with the print window takes precedence over the others.
    Thank you!

    Thank you Linc!
    Right before I got your response, I tried exiting out when the computer was offline, and it allowed me to take it off.
    Thanks again for your answer...have a good day!

  • Trying to print and getting enter IPAD admin password

    Trying to print a document wirlessly from my 2007 macbook pro and when I do it says enter IPAD admin password?
    What do I have to do?
    thanks

    Hmmm, never heard of that... is there an iPad in the house?

  • HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

    I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
    It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
    The Power on the actual printer is flashing slowly as well.
    I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is. 
    This question was solved.
    View Solution.

    Hello there! Welcome to the forums @Chinadoll702 
    I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
    Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
    Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
    Try printing from Text Edit on your Mac as well, and get back to me with the results.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I used to be able to print the Guardian Crossword, but since I changed the Page Setup margins for another website it is scrambled. I've tried resetting printer and all printer settings, still not working

    Here is the link http://www.guardian.co.uk/crosswords/cryptic/25504/print - it looks fine on screen, but print and print previes loses the format. I reset the margins back to 12.7, no effect, and did the "Reset print.print_printer" and edited prefs.js as in the Troubleshooting page of Firefox help.

    Thanks for your response, disconcerting though it may be.
    I guess I'll have to look at other platforms.

  • Trying to create a Field Validation Expression and need help

    I have a picklist field and another field that are in question. I want to set some sort of rule that forces the second field to be populated only If specific values are selected from the picklist field.
    I was going the route of a field validation Rule, but everything i've tried so far does not produce the results i am trying to achieve.
    The first type of expression i tried was:
    ([<plProduction_Print_Account_Category_ITAG>] <> LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print") AND ([<stSIC_Code_ITAG>] IS NULL))
    This is generating the field validation error message when i select any of the correct values from the picklist. the problem is still the second field, which will generate the error if a value is entered into the second field, regardless of the picklist value selected. Switching the "IS NULL" to "IS NOT NULL" only reverses the problem on the second field, causing the error to generate when the second field is updated to a NULL or blank value.
    I also tried :
    = 'No Production Print' AND [<stSIC_Code_ITAG>] IS NOT NULL
    and got similar results.
    ([<plProduction_Print_Account_Category_ITAG>] = LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print"))
    Similar results as well.
    Does this need to be an IIF statement? Do I need to make this a workflow expression instead? i could really use some help as I have tried everything i can think of and admit, i'm not the expression guru!!!. Any assistance would be appreciated.
    TeknoMan

    Yes we have the same request and we used the following expression. Example we have a field "Método de pago" ( [<plMtodo_de_pago_ITAG<]), it's values are "CHEQUE and DEPOSITO" if we select DEPOSITO three more fields were requiered Route, Sucursal de banco and Clabe so we have to put this validation in the four fields including Metodo de pago.
    [<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL)
    well in the field CLABE we put the following [<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL AND Len([<stCLABE_ITAG>])=18) this was because the len of the value must be 18 characters.
    I hope this works for you
    Regards Catalina Valadez
    Edited by: CatalinaV on 12/03/2009 10:54 AM
    Edited by: CatalinaV on 12/03/2009 10:55 AM

  • I just purchased the envy 7640 all in one printer and need to enlarge the print

    I just purchased the all in one envy 7640 printer and want to print from my lap top but the printing that comes out is very very small and i need to enlarge it, I am not a real computer whiz so I just need step by step instructions on how to enlarge the copy being printed.  Thank You in advance for your help.

    Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are trying to enlarge the size of a document you are trying to print. While the specific directions will change depending on your operating system, the program you are using, and the type of document you want to print, I can certainly make sure you get pointed in the right direction. Assuming you are trying to print a text document (and please let me know if you are not) then first you will want to highlight the text you are trying to change the text of. Once highlighted you are looking for an option found at the top of most windows. The option usually has a font name to its left such as Times New Roman. When you select a larger font size it will change the highlighted text so that it matches the size you selected. I've included an image of the option below.  If you are trying to print something that is not a text document then please let me know what program you are trying to print from as well as what operating system you are using. If you are not sure what your operating system is you can click here to find it. If you have any other questions please let me know. Also, if this resolves your issues then please let other forum users know by clicking on Accept as Solution below my post. I hope this helps and I hope you have a great evening!  

  • TS3297 I can't empty the trash. I keep getting error code -8003, I have tried the terminal methods including both sudo and chflags. The apps that won't delete are

    I can't empty the trash I have three different versions of Quicken Essentials that should have been deleted and also some iskysoft apps [two ]. I tries to delete them but I always get a -8003 error. I ve tried using the terminal with both the sudo and chflags methods. No effect. Can anyone give a method that would work to delete the five? In advanced appreciation.

    Hey donnie90,
    It seems like this article might be the best for helping you address this issue:
    You can't empty the Trash or move a file to the Trash
    http://support.apple.com/kb/ht1526
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Tried to print and nothing happens......

    I've tried everything and nothing will print. It acts like it's printing but nothing is on the paper. Its a Lexmark 2250 and i've gone to it's site and nothing has helped me. BUT I had an epson printer that did the same thing before this lexmark that I just got so it seems like it's my computer and some setting?? Any ideas at all, please help me.

    Take a look at /Applications/Utilities/Printer setup utility. From here delete any printer in the list, especialy the espon and lexmark. Power the computer down and disconnect the power for 5 minutes. Plug the compuer back in aswel as the printer's. Go back to the printer set up utility and add both printers again. Try printing in Text edit. You should be able to print from there. If you can't let me know. Hope this Help's

  • HT4356 I print from this app frequently with no problem however when I tries to print and configure folded card it is stalled

    How do you get Martha Stewart craft studio to print without hanging up?

    Hello, Iantoj. 
    Thank you for visiting Apple Support Communities. 
    I see you have a Epson SX525WD and this is a Wi-Fi capable printer.  However, I do not see this model listed in the supported AirPrint printers at this time. 
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    Regards,
    Jason H. 

  • Just plugged in my wireless printer and need assistance please - can anyone help me to start printin

    just plugged in my hp deskjet 3070A e-ALL-IN-ONE SERIES and want to do a test print - I'm not sure what I am doing and don't want to make any stupid mistakes - the software was loaded on to my new hp laptop when I bought it from PC world/currys - can anyone "talk me through" the basics that I need please?
    sorry to be such a wuss but am okay once I know what to do - if I get in a jam when first trying, I get a bit worried about what to do so would much rather get it right first time and then I can go on from there
    thanks in anticipation ...

    Since you installed it, just follow what the manual and instructions say and print away....
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HT1338 I have a Mac Desk Top Computer OS X10.5.8. I have a new hp 7525 printer and need to upgrade. Can you help me do this online?

    I have a new HP 7525 printer. I have a MAC desk top coputer. It has OS X 10.5.8. I need to upgrade so I can complete the install of my printer. Can I do this online(download a new system) I am also not sure if I need Snow Lepoard, or Mountin Lion. HELP!

    You need to have Snow Leopard to get to Mountain Lion. ML is available for download from the Mac App Store.
    The Snow Leopard (10.6.x) upgrade is available only on DVD from here;
    For US; http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    For UK: http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Update to 10.6.8 using the combo installer; http://support.apple.com/kb/DL1399
    Snow Leopard 10.6 system requirements:
    Mac computer with an Intel processor
    1GB RAM (2GB or more preferred)
    5GB available disc space
    DVD drive for installation.
    Lion is still only available from Phone Sales as far as I'm aware;
    in the US, call 1-800-MY-APPLE and ask for a sales assistant; they'll give you a download code to use in the Mac App Store.
    UK sales; 0800 048 0408
    If your Mac meets the requirements you can go straight to Mountain Lion from 10.6.8 using the App Store.
    Lion 10.7 system requirements:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7 or Xeon processer
    2GB RAM (4GB minimum recommended)
    OS 10.6.6 or later (10.6.8 recommended)
    7GB of available HD space
    Mountain Lion system requirements;
    Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminium, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    And meet the same RAM and disc space requirements as Lion.
    Many third party applications (and some Apple ones) may need updates for SL (Adobe particularly) and definitely will for Lion/Mountain Lion, so check with the vendors for compatability before you upgrade.
    Also, while most legacy PPC apps that run in Leopard will also run in SL under Rosetta, they won't run at all in Lion/ML as Rosetta support has been dropped. That may include drivers for some older peripherals as well as apps like Appleworks or Office 2004 or earlier and many Adobe apps.
    For what it's worth, I'd go to 10.6.8 and try the printer. If it works OK, stay there until you have a chance to try the newer OS on someone elses computer. It's not for everyone, as may be attested by the number of requests for info on rolling back to SL.

  • My settings and messages app open and then close in a matter of seconds, I've tried restoring from the back up of and downloading a free app. Nothing's worked. I'd really like to avoid setting up as new. I'm on 6.1    PLEASE HELP

    PLEASE HELP

    i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
    thanks

Maybe you are looking for

  • Problem with a pie chart

    Hi Gurus I try to do a pie chart and a i´ve a problem .in the format Categories i use percent 0.00% for to see the value but i can´t see the name of the categories .it´s possible and how ? thanks Gurs

  • Personal hotspot working via BlueTooth but NOT working via wi-fi

    Hi, Would appreciate some help with this! Using an iPhone 4, just upgraded to iOS 4.3, and trying to get personal hotspot working. Basically, see subject ^ .. I can't get it working. Devices (I've tried iMac, iPad) can see the wireless network create

  • Connecting ipod to my computer

    Up until tonight my ipod have been fine and it charges ok but..... When i connect to a usb to try and sync songs etc. its not recognized anywhere by anything have tried updating itunes using different usb ports and nothing. What is wrong?!?!?!

  • Activation of company code currency flag in CO-PA

    Hello, I have activated company code currency flag in CO-PA. I understand that CE1xxxx records are created in company code currency flag after activation. Is there a tool available to create the records retrospectively for transactions posted in the

  • Use of CMS/JDI for portal development

    I have recently installed JDI offline and online and configured it for use of XI develpoment but now i am asked to Use CMS to transport portal components or contents. My Question, is it possible to Use CMS for portal transports and Can i get any kind