I am trying to set up the MiFi4620L jetpack to my brother-in-laws computer, which has WIFI. It does not recognize the jetpack. What do I need to do?
I recently put in a new SIMS card to our MiFi4620L Jetpack. When I was at the Verizon Store the person who was helping me was able to sign onto the internet via the jetpack. Now that I have my brother-in-laws computer, which has WIFI, I am unable to set up the Jetpack. It does not recognize it. What do I need to do to get it set up?
If the PC cannot "See" the Jetpack then that means one of the following has happened:
1. The wireless adapter in the PC is defective
2. The Jetpack is defective
3. The wireless adapter on the PC cannot see the signal coming from the Jetpack (2.4 Ghz vs. 5.0 Ghz)
4. There are too many competing wireless signals and the PC cannot see the signal from the Jetpack
Solving 1 and 2 is a simple matter of trial and error. Confirm that the PC can see and connect to other networks. Confirm that the Jetpack can connect to other PCs. After that you need to check the specs on the Jetpack and the PC wireless card to make sure they are compatible. If they are but the Jetpack is still not visible then that usually means the air is too crowded with competing SSIDs/Network names. This is common in urban/apartment/dorm scenarios where multiple signals are exposed to a single machine. The solution is either to move to an area with less competition, convert to an Ethernet cable via a wireless bridging device, or migrate to 5.0 Ghz (this jetpack only works on 2.4 Ghz).
Similar Messages
-
Is there another way to convert the .orf files that are not being recognized ?
I used a card reader.
The Olympus Viewer software reads the raw images just fine.
ThanksI do not see your camera on the list of supported cameras, sorry.
Apple - Aperture - Technical Specifications - RAW Support
The Olympus Viewer software reads the raw images just fine.
Does this program have an otion to export the photos in a different format? Then it would be the best way to convert the image files to a supported format.
Or check, if Adobe's free DNG converter supports your camera: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
Aperture can import DNG files with the right settings.
You might also simply import raw+jpeg and work with the jpegs as original files, while you are waiting for the raw support to be released.
Regards
Léonie -
so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it. -
When visiting a site I frequent I tried to download a linked .pdf file. Previously I've used Firefox 7.0.1 to download the link with no problem. Using Firefox 8 however I the browser does not recognize the .pdf link's mime type. Instead of recognizing the download link as a .pdf file Firefox 8 tries to download it as "index.php". Firefox 8 does this with .doc files and .txt files as well. When I downgrade to 7.0.1 again the problem disappears.
Hi hakmacpace,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps! -
I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?
Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test. -
Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?
Download VLC and try playing the video...
http://www.videolan.org -
I am trying to install an old PhotoShop disk Elements 2.0 but during installation the site does not recognize the serial number I have on my registration form. Help?
Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
Thank youThere is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
About the error code.....
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If needed.....
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again. -
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry -
Hi…I am trying to email photos from iPhoto and I keep getting a flag that says "the server does not recognize the username/password combination. Can you help me to reset it?
Thank you very much for the quick reply and it was so easy. Make my life much easier now
Thanks so much -
Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help
Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.
-
I am trying to connect a MacBook Pro to a network using a Linksys PLEBR10 USB ethernet adapter. The MacBook does not recognize the USB device nor the network behind it.
Anyone have a solution?
Thanks
AJBContact Linksys or post in their forum area.
-
Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas? -
Iphoto 8.03 and it does not recognize the camera
Just downloaded IPHOTO 8.03, It does not recognize the camera
Not able to download new photosWhat camera is it? Have you set it to PTP or Mass Storage? Did you check the cable, camera battery, try a different USB port? Have you tried using a Card Reader?
Regards
TD -
I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except the last Library on my computers will make Virtual DJ recognize it. I tried renameing the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around in there. Any help would be appreciated.
Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.
Maybe you are looking for
-
How to get last Build date of a dll in the real time target
Info On My Project I am working on LabWindows CVI 12.0 for development . This project is a real time application for hardware, which is having Phar Lap ETS as RTOS... I am facing some problems while checking Build date of my Application file
-
Batch rename files preserving the original file name in metadata
How can I batch rename files while preserving the original file name in metadata? (Don't want the old file name as part of the new file name) (Adobe CS Bridge can do this with some success, but I don't want to be dependant on this software. Results a
-
Design View Not displaying the page
Recently I asked the same question here but I think I did not explain myself correctly. I have hunted for answers but not found any so I am asking again with images this time. I have had this site written for me and I know it was written in DW. They
-
Tree component flash cs3 multiline/wordwrap
Hi All, I have a tree component customized ..now i am stuck at the length of the text ..i need to have the text in the tree node to word warp for lengthy text.. thank you for the help in advance.. kakas
-
Deja vu, all over again. WEDU has spotted the arrival of Windows Embedded Compact 7 Wave 2; Unfortunately, I have installed shared source - and like when Wave 1 arrived, the shared source update doesn't seem to be available via WEDU; last time, this