I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit

Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq

Similar Messages

Cd printing with a canon pixma ip4200 + photoshop/illustrator

Sorry if im posting this in the wrong forum.
I just recently bought a canon pixma ip4200 printer mainly for its cd printing function.
the software that comes with it is very basic. I have photoshop and illustrator, but i cant get the print to allign properly through these 2 programs. i can only succesfully print with the canon software.
i was just wondering if anyone here uses the same printer with photoshop/illustrator and can get 100% allignment on the print.
Ive played with the settings within photoshop/illustrator, but i dont want to keep wasting cds trying to perfect it.
failing that, does anyone know of any other good software for cd printing.
i recently installed a demo of Disc Cover from MacWorld magazine, but wouldnt want to commit to buying it until i was certain it worked properly.
Cheers

http://discussions.apple.com/thread.jspa?messageID=728440&#728440
http://discussions.apple.com/thread.jspa?messageID=729785&#729785
http://discussions.apple.com/thread.jspa?messageID=1992804&#1992804

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

Don't know how to use the air print with my ipads.

i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

Hello.
In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router. Once this has been done you should be able to print.
The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

Trying to setup RAID 1 with new SATA drives on xserve 2009 model

Trying to setup RAID 1 with new SATA drives on xserve 2009 model
I have an Xserve rack mount model Xserve 2.26 Quad Core (EMC# 2279) with an Apple RAID card, 24GB RAM (running 10.9 Server software)
Purchased two Western Digital 1TB SATA III 7200 RPM 64MB Cache Black WD1003FZEX drives
It came with three 160GB SATA drives. I'm leaving one of the original 160GB drives for the OS, but I want to replace the 2 other drives and set it up with RAID 1 (mirrored). I bought 2 brand new Western Digital 1TB SATA drives and formatted them on another Mac through Disk Utility with Mac OS Extended (Journaled) formatting. I then placed the new drives in the Xserve and booted it up. After I login it immediately gives me 2 error windows saying...
"Apple RAID Card
The Apple RAID Card installed in your system requires your attention."
It has two buttons underneath this message allowing me to either select 'Ignore' or 'Open RAID Utility'
I've tried to RAID the drives the Disk Utility and through the RAID Utility with no success.
I have both drives mounted on the desktop, as separate drives, but I really need to set these up as a RAID 1.
I've been reading other forums, where others have been able to get this to work by using a jumper on certain pins (5 & 6)of the drive to back down the transfer rate to 1.5 Gb per second. I tried that and it didn't work for me. Maybe I used the wrong pins -- I just don't know. I'm also wondering if there is some Apple firmware that is required on these drives? I'm asking for help from anyone who has gone through this same issue. Thanks in advance.

UPDATE -- I had an issue with the RAID card battery, it was dead and I have since replaced it. But I am still unable to setup the RAID 1 drive configuration. Does anyone know if it has something to do with the faster transfer rates on these new drives. Maybe they need to be clocked down with certain jumper settings on these Western Digital drives? Or am I fighting a losing battle because these drives don't have Apple firmware? Any help would be appreciated. Thanks.

Air Print with iOS 7

I am unable to use Air Print since getting my iPhone 5s and also cannot use it with my iPad since upgrading to ver 7.0. Has anyone else had this problem?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Can I Air Print with Photosmart C4180?

How Can I Air Print with Photosmart C4180?

Take a look at this link. It will give you information on the options you have
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Why cant i use air print with my hp deskjet 3050

why cant i use air print with my hp deskjet 3050

The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.

Air print with hp officejet pro 8000 wireless printer - a809n

The question is the same as the subject: how to air print?

Hi,
Hope these instructions and tips help:
http://reviews.cnet.com/8301-19512_7-20023976-233.html
http://www.aramistech.com/tips-tricks/enable-airprint-in-windows-and-use-any-printer/
Pease post back the result.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help

I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help.

With an attitude like that, you got nicer replies than you should have. I have my work email on my iPhone and my iPad, but there's no way on earth anyone here would have known what my companies server is other than my company system administrator.........

Printing with Epson & Canon printers

I’m new to a Mac having been a Windows PC user for years. I certainly like what I've seen so far. Reasonably competent with Photoshop CS3 and have loaded Mac version.
Main printer is Epson R2400 but also use Canon Pixma iP8500 and both worked fine with PC.
I had a number of files set up in a folder on my Windows PC which involve an image of 7.5" x 5.5" centred (on A4 canvas) and then framed by a thin 1px border of 10" x 8". These are for a particular task I perform and they need to be like that. Copied these on to Mac.
When I print out on A4 photo paper on either printer the whole image incl. the border shifts about 0.25" towards one end - i.e. in portrait mode it shifts up the page. Also, the long sides of the border don't appear, but the short sides do. I have reduced the size of the border slightly and all 4 sides then appear which indicates that the printers are not printing up to the edge of the paper which of course they are capable of doing. I sometimes need to print right up to the edges of paper.
Responses from suppliers as follows:
Apple helpline - they said contact to Canon and Epson who can send a download for Mac operation.
Spoke to Epson, they say maybe a download will work (they told me which one) but they say it's to do with the CS3 software. Download had no effect. Not spoken to Canon yet but suspect the same will happen.
Apple store - I go into local store for tuition and one of their people uses same gear as me and doesn't have this problem with it. Suggested uninstalling printers and reinstalling. Tried several times - no joy.
I'm going around in circles here. Solution maybe a blinding flash of the obvious - I hope so.
By the way, in the printer dialogue box that appears as part of the Photoshop printing process I have got "centred" checked.
I realise that Macs will have different screens to PCs but am I missing something here in the Mac print dialogue boxes? My first impression is that there are not as many options there as with PCs but I may be wrong.
Am I right in assuming that this problem is something to do with the way my Mac is working - especially as someone else in the Apple store says there's no problem with his printing on the Epson?
Help please!!
Bob

One simple thing to look for is that sometimes the printer drivers include a "borderless" paper size. Try looking at the paper size settings in the print dialog to see if you're printing on A4 regular, or A4 borderless. Also, I recall with one epson printer, I had to actually add the printer in again as another printer with its "borderless" driver. So if the paper settings don't help, try going into SystemPrefs>Printing&Fax, hitting the + sign to add a printer, find your printer, and see if there's another driver offered that's called something like "borderless".
This assumes of course that you've checked with epson and canon for the most up to date drivers. Check their sites for any updates.

Has anyone else had problems with the Canon Pixma MG3250 on their air?

I bought a Canon Pixma yesterday, and I have had problems setting the printer up as one I don't have a cd drive- so I had to download the software- and two my laptop does't seem to recognise the printer wirelessly. It is fine when I stick the USB cable in. I contacted apple to see if it was a software issue, they helped by getting a couple of things up- then I followed the guide from canon on how to install the printer and and connect to WPS but it just doesn't seem to like my mac. Help I'm at my wits end!

I had a similar problem. After i extracted the audio track from a clip (so i can edit it down for a drop zone in iDVD) iMovie aborted and i couldn't get it to run correctly with that video again. Each time i tried to open it, iMovie would hang with the startup dialog saying there was less than a minute left to load the video.
I trashed the video and pulled up my backup from my outboard drive (tedious; >.5hr over USB 2), i'm going to try again.
I have QT Pro also (i upgraded for the file conversion features, mostly).
PowerBook G4 Mac OS X (10.3.9)

I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks., I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks.

I have OS5 on my IPad.

You first need to setup the printer with your computer to use it wireless with your router. Use a Static IP address for the printer on your router.
Then be sure the iPad is on the same WiFi network and the printer is on.
Then you can use this Apps on your iPad;
http://itunes.apple.com/app/hp-eprint/id299531647?alreadyRedirected=1&mt=8
You can also try this App; http://itunes.apple.com/app/hp-printer-control/id469284907?alreadyRedirected=1&m t=8

SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
"The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
"GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

Hi,
Search for routine FORM SORTFELDER_ERMITTELN
in SAPF150D.
Put a breakpoint in statement
ASSIGN (T047F-FELDN) TO <H1>.
in above routine and debug to the point where error is occuring.
Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
In that case, simply change the T047F-LENGT field accordingly in change mode.
Cheers,
Vikram
Edited by: Vikram Jalali on May 27, 2008 5:56 PM

I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

Similar Messages

Maybe you are looking for