I am trying to setup iCal syncing with Mobile Me on Mac Pro and Mac Pro Notebook.  I have accounts added in for MobileMe and Gmail.  Problem is that iCal does not appear as one of the Sync choices in the MobileMe sync window on either computer?

I am trying to sync iCal with all my computers and devices via MobileMe.  I cannot sync iCal on my Mac Pro nor Mackbook Pro.  I believe accounts to be setup properly BUT on both computers there is NO choice to select iCal among the choices in "Sync Menu" on the MobileMe window in System Preferences.  Help?

Greetings,
If you delete individual messages they will be deleted from other accounts.
If you setup the accounts as IMAP (which is the default for MobileMe accounts) you can remove the accounts and the other users will still have the email.
Alternatively if you don't want to see the account in the other user go to Mail > Preferences > Accounts > MobileMe account > Advanced > remove the check mark for "enable account".  This leaves the account and just turns it off so you don't see it  and it doesn't send / receive messages.
Finally,  you should be backing up your data for safekeeping so even if you did delete the account and the messages magically vanished you could restore them: http://support.apple.com/kb/HT1553
Hope that helps.

Similar Messages

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

    Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
    Is it because the backup on progress?

    Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
    Make sure you are using ipv6 in the computers..
    See
    http://support.apple.com/kb/TS4597
    The 6.3 utility will not work without it.
    Make sure all names are short, no spaces and pure alphanumeric.
    Do a full reset and start over.
    But there are no more controls.. you cannot set mode..
    You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
    Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

  • When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.

    When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.
    Any help would be welcome

    This is a bug in Mail. The mailbox archiving function does not include attachments, which  gives the error with the import. To workaround this you can create a mailbox in Mail and copy to it all emails you want to export. Then go in Finder to [user]/Library/Mail/Mailboxes en select the created mailbox. Copy this to the public directory of your other mac. Then start Mail on that other mac and import the mailbox from the public directory. Should work now.

  • Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

    Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

    Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • How do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

    how do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

    reinstall over your current installation and then uninstall, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    or uninstall manually, Manually remove Adobe Creative Suite 2.x | Windows

  • I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    Hi vindog60,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    Alex H.

  • My cursor frequently stops working.  It still moves but nothing happens when I click with it.  Also, when I go for support Apple tells me my serial number does not exist but I am sure I am entering the correct one.

    My arrow cursor changes unexpectedly to the "tall I" cursor and then I can't open links.
    My two delete buttons only work one letter/number at a time.
    When I go for Apple support it says my serial number does not exist?  But I know it is correct!

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I am trying to restore mu I mac to original settings bu HD Mcintosh does not appear which one do i select

    i am trying to restore my i mac to original settings but unable to HD Mcintosh does not appear so which one do i select

    The first one says 1TB APPLE HDD ST100
    the other says  \FV/R4Q

  • IPhone  does not appear in list of devices in iTunes in the cloud

    my iPhone does not appear in the list of devices

    Hi, cdv2007. 
    Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac. 
    Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
    Follow these steps to resolve your issue:
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below. 
    Mac OS X v10.6: iOS device not recognized in iTunes after restart
    http://support.apple.com/kb/TS3540
    Cheers,
    Jason H. 

  • EXC_BAD_ACCES at object that exists (Does not appear on NSZombieEnabled)

    Hello everybody, I got an EXC_BAD_ACCES. I made upa n iPhone/iPad App, and one day testing it on iPhoneSimulator, I found that the app chrashes, when I´m trying to remove something from an array. I have a Selfmade object-class, called Box. In every box are 6 NSMutableArrays. In the init method, they are all alloced and inited, and of cause they have to be released in dealoc. And in this dealoc, I get an EXC_BAD_ACCES on the last array, although its handled exactly like the other five. I turned on NSZombieEnabled, to fight the bug. But it was away. Everything worked well. So I thought it might be just a bug of the iPhoneSimulator. Now I´m testing the App on a real device, and the Bug comes back. Not when I turn on NSZombieEnabled on Xcode and start it from there, but if I´m starting it on the device (an iPad 1) itself. So I tried different things: 1.) I set a breakpoint right before the release. I found out that the object is NOT released at this time. It has a place in the Memory, and it seems just like a complete object. This is strange, because such errors usually appear on overreleased objects. 2.) I tried to log the retainCount of the object. It ended in the same EXC_BAD_ACCES as the release. 3.) I tried to Log the retainCount of the object #5 wich is released before #6 without any kind of problem. This is intressting, because it leads to an bad_acces in the [array removeObjectAtIndex:... line. 4.) I thought: If there is an bad_acces on these objects, why should I release them? So I commented out the dealoc funktion. It worked. But instruments showed tons of leaks. So this is no option. In conclusion:
    There is an EXC_BAD_ACCES although the objects are not overreleased.
    This error does not appear with NSZombieEnabled
    The objects are there, they EXIST, instruments shows that and Xcode, too. But there is an bad_acces anyway.
    I am really confused, and I don´t know an answer, I have never seen anything like this before.
    I´m waiting for iOS 5 with Garbage collector

    EDIT:
    I also tried
    if (array) {
            [array release];
    but it did crashed in the [array release]; line

  • Trying to setup my Airport with, mobile hotspot. I am using an iPad for setup.

    Hey there, I am using my iPad to set up my Airport Express.
    I'm actually trying to set up a POS, with a printer and it's been a huge headache.
    Finally I've come to this possible solution of using an Airport. I did a quick google search and it brought me to this page. Only problem is when I use the Airport utility to tell the Airport to join a wireless next work.
    As soon as I press update it'll process then just compeletly not recognize the Airport saying "No Base Stations have been found."
    Noticed a few people had the same issue but their solutions were found using a Mac, where as I am limited to an iPad. Any help would be MUCH welcomed.

    Once the AirPort Express joins another wireless network it become another wireless client on that network and is no longer performing as a wireless router. To be able to access it with the AirPort Utility, you much connect your iPad to the same wireless network that the Express is connected to.
    Another "trick" is to temporarily enable "Airplane Mode," and then, disable it to allow your iPad to search and reconnect to this wireless network.

  • In the download box, the check box for "always do this for this type of file" is grayed out for the type of file I want, and that application does not appear in the application menu, so how do I set it to perform this function every time?

    The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.

    The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.

  • HT5312 The phrase does not appear Forgot your answer so I can change the answers

    forgotten answer for security question
    Please, I want to let me change my answer to questions of safety and I want to know why you do not see the phrase Forgot your answer

    It doesn't appear because you haven't set up a rescue email address. You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
    (79927)

  • Successful download of Lightroom CC, but icon for this updated version does not appear on desktop.  How do I access the installed current version of Lightroom CC?

    Repeat:  I successfully downloaded the Lightroom CC application, and the updated version of Photoshop.  However, a Lightroom CC icon never appeared on my Mac laptop pro, and I am apparently unable to access the Lightroom CC application.   The updated (current version) of Photoshop and icon did appear on the desktop.  How do I access Lightroom CC??

    Hi
    Find the Application and create a desktop shortcut to Lightroom CC
    How to Make Desktop Shortcuts on Mac - OS X Tips - LAPTOP

Maybe you are looking for

  • Help!  I can't open a slideshow in PSE 8

    I've created a slideshow in the organizer, but need to do some editing.  I can see it in the organizer, but when I click on it nothing happens.  In fact, when I check the task manager in windows XP, it tells me it's "not responding" and I have to "en

  • BI MOBILE Application pin

    For SAP BI MOBILE 1. We can force the user to setup the 8 DIGIT PIN. However - is there a way to not allow the user to change the "require application password  - after 5 minute" setting? Currently the user has to setup an application password but he

  • Inconsistency GLPCA and GLPCT

    Hi I have differences in GLPCT and GLPCA Does anyone knows how can I correct inconsistency in the total table GLPCT to the totals of the corresponding line items GLPCA thanks in advance ANC

  • HT4847 I have an iphone and ipad, how do I merge the two icloud space together

    I have an iphone and ipad, how do I merge the two icloud space together

  • Quicktime Broadcaster Crash

    Every time I try to open QT Broadcaster, it crashes before it even opens the window. Has anyone else had this problem, or have any suggestions to fix it?