I am trying to up grade my firefox to 5.01, I have an eee pc 1000, how do I get it to install? i can download the application, but not get it to run!! I am a novis with linux!

I am a complete novis with the linux system, it was a gift to me, I can in no way get the up date to install on the system, i have tried every which way i can think of...please please help!!

That is Xandros, from 2007. How you got 3.0.4 to run on Xandros is beyond me, the GTK package is too old.
Your best bet is to install a new operating system, like maybe Ubuntu 11.04. It's not an easy job though, it gets a bit more complicated because you don't have a CD/DVD drive in the EeePC. You have to get the ISO image onto a USB Flash stick first.
https://help.ubuntu.com/community/Installation/FromUSBStick <br />
http://www.ubuntu.com/download/ubuntu/download
That is what I did last summer with my EeePC 900 model.

Similar Messages

  • HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

    i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

    Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

    Use another browser.
    Mylenium

  • I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C  C  runtime error. I can open the organizer but not the editor

    I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C  C  runtime error. I can open the organizer but not the editor

    I'm keen to know if you get a response to this.  I've been running Elements 12 for a year now, and suddenly my Editor is not working.  I'm running Windows 8.1 and just get a message that says "The Editor is not working".    Not very helpful.

  • My mac OS doesn't support the new version of Firefox, so I don't have it at all now--how do I get back to the older version?

    my mac OS doesn't support the new version of Firefox, so I don't have it at all now--how do I get back to the older version?

    All firefox releases:
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/
    check this too:
    http://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox
    thank you

  • I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

    I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

    Lmwilliamson wrote:
    Kernel panics:
    After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists. 
    I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
    I am able to use my computer in Safeboot mode (only)
    Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
    If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
    If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
    Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
    ..Step by Step to fix your Mac
    Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

  • With my Airport Express, I can join the network but not extend it.

    I just bought a new Airport Express to extend the network I have setup with my Airport Extreme.  At first, it seemed the Express was unable to get a correct IP address, I think because I had my DHCP server running from the cable modem, and the Extreme was just acting as a bridge.  I switched the Extreme to run a DHCP server and now the Express correctly receives an IP address.  However, it still tells me that it cannot extend the network, but gives no details why.  It just tells me to make sure I have the correct password and to be sure I am in range.
    Clearly I am in range and have the correct password, because when I switch to "join network", all works fine.  Though when I do switch, I still get an amber blinking light and Airport Utility still thinks the Express is in Extend mode.  When I unplug and replug the Express, then it comes up with a green light and Airport Utility shows it in Join mode and all works fine. 
    I am thinking there might be something wrong with my Express and am considering exchanging it.  Just wondering if anyone has any ideas as to why this may be happening?
    Thanks.

    However, it still tells me that it cannot extend the network, but gives no details why.
    Suggest that you check your AirPort Extreme to make sure that you have enabled the wireless network to be extended.
    Open AirPort Utility, select the AirPort Extreme, and click Manual Setup
    Click the Wireless tab below the row of icons
    Just under the setting for Wireless Network name......make sure that there is a check mark next to "Allow this network to be exended".
    Update to save changes
    Now, try the configuration with the AirPort Express set to "Extend a wireless network"

  • AFAR test run showing the values but not posting in Real run.

    Hi Friends,
    i have an issue with AFAR recalculating the depreclation. The details are as below;
    1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
    2. The Period control method 11, the dep. is calculated for entire year for acquisition.
    3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
    4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
    5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
    6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
    We have opened FI periods as well.
    My question is  that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
    As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
    I  request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
    Best Regards,
    Padmaja

    Hi,
    Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
    Thanks for the help.
    Regards,
    Padmaja
    Edited by: PadmajaCH on May 19, 2011 3:26 PM

  • Two issues getting a headless error form windows & my clips audio plays in the preview but not once placed in th timeline. I taped with a panasonic HC 750 V. i believe it is with clips filmed using directed not surround audio.

    The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
    Any help apprecaited.

    pc
    Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
    Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
    a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
    b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
    c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
    rather than AAC audio.
    Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
    a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
    b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
    Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
    Thanks.
    ATR

  • Firefox is crashing continuously when I open it. I'm unable to open it in safe mode and reinstalling the application has not worked.

    I've been running Firefox v. 18.0.2 and for a few days the application continually crashes everytime I open it. I'm currently unable to get into safe mode and this is occurring on all profiles on the machine. I've went through and updated all my Add-Ons however the issue persists. I decided to re-install the application wiping out any configurations that were previously configured. I've also tried deleting the entire %APPDATA%\Mozilla folder. Up until this point I am unable to get Firefox running.

    1. Click the Windows Start button, and select Run... on Windows XP or press Windows Key + R on Windows Vista/7. Type in "%APPDATA%\Mozilla\Firefox\Crash Reports\submitted" including the quotation marks and click OK.
    2. In the resulting folder will be a text file for each crash report you have submitted. Using the View menu, arrange them by date to find out which is the newest file; and double-click on it to open it.
    3. Report back to us with the latest crash ids.

  • New Install - Can access the internet but not with Web Browser

    I just installed Solaris 10 11/06 with my new Ultra 20 M2 workstation. I can ping, complete NSLOOKUP commands on public domain names and can telnet; however, when I try to use the browser it says it cannot connect to the internet. I made sure of the following:
    - Web Browser is not using proxy
    - resolv.conf is accurate
    - defaultrouter is accurate
    - hosts, hostname.. are good
    - netmasks is fine.
    Any thoughts? thanks for your help.

    Is there a firewall between the server and the internet, try telneting the fully qualified domain name again but on port 80 (or 8080) (i.e. telnet www.yahoo.com 80), do you have another machine on this network that can access the internet through a browser (if so check it's settings) also if you have an intranet see if the browser can access that, if these don't work then the problem is settings\config in your browser.
    also try a traceroute and see where the packets are routed and how many hops it takes.

  • Trying to print coupons for Target store requires the site to install a plug-in but is only compatible with firefox 2.X is there a way around that or is there an archive of the older versions i can download the 2. version? I am currently running 9.0.1

    version of firefox 9.0.1
    OS is Mac OS X 10.5

    Firefox 2 was released in Oct '''2006''', over 5 years ago. It isn't supported by Mozilla any longer and isn't safe to use, as it is missing over 3 years of security updates that newer version of Firefox have.
    My advice is to contact Target and ask them to provide a plugin for current versions of Firefox - not one for a 5 year old browser.

  • Hi I am running firefox, as I could not get on with IE9 at home. But I need to install active X remote desktop to enable me to do work from home. I have downloaded the application, but it is not being seen in my browser. Any ideas how to resolve?

    Please help?

    Firefox does not support ActiveX technology:
    http://support.mozilla.com/en-US/kb/ActiveX
    https://support.mozilla.com/en-us/questions/692062
    https://support.mozilla.com/en-us/questions/682975
    thank you

  • I have a mini iPad with which I take pictures and capture video. In order to see them on my home tv I bought an Appletv and HDMI cable  and connected it to my home tv, Now I can see the pictures but not the video.Solution please?

    How can I view on my home TV videos that I captured with my mini iPad?

    Hey andrikos175,
    Thanks for the question, and welcome to Apple Support Communities.
    You are on the right track, you'll want to AirPlay these videos to your Apple TV. If you are having issue with AirPlay, please see the following troubleshooting resources:
    Using AirPlay
    http://support.apple.com/kb/HT4437
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Thanks,
    Matt M.

Maybe you are looking for