I am trying to upload an imovie to youtube. it says project too large but i have permission for larger projects. Help and thanks.
I am trying to upload an imovie to youtube. It keeps saying "project too large" even though I have permission from youtube for over 15 minutes. Please help. Thanks.
share the video via a quicktime movie in whatever format you want to use, I usually create an mp4. Once you that video is set (I usually save to my desktop) go ahead and upload from YouTube rather than going direct from iMovie. I suspect you will not have the same size issue.
Similar Messages
-
while trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
And while trying to unlock screen after lock , slide not working 'slide to unlock'Hello there, charialji.
The following Knowledge Base article offers some great steps for troubleshooting your issue:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I'm trying to upload videogame footage to youtube at 1080P and 60 FPS what specs do I need to do to do that
How big is that movie file? I don't know if iMovie on the iPad lets you see the properties or if you have to import it into your computer to see the file size. But another issue could be the movie file being many hundreds of megs or even gigs.
I had a 3 minute video that I shot with my iPod be 300 megs and when I tried to upload it to youtube it took about half an hour for it to upload and process. -
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
I'm trying to upload proof of purchase of the macbook pro i bought, but every time it just stops. How to upload it ?
Why don't you contact the online store's customer support?
-
FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...
You're in totally the wrong place... this is the Mac Pro (no Book) forum for hardware. You want
Final Cut Pro X: Professional Applications: Apple Support Communities
Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy. If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
Good luck -
I'm sorry! This is my 1st post to the support community and I put my problem in the topic bar! When I try uploading an iMovie to YouTube I keep getting a message to sign into YouTube when I am already!! I've done this in the past with no problem...including as recent as in December. Hope you can help ... Need for my students ASAP.
Do you have the YouTube app loaded on your iPad? Are you signed in there (in that app)?
-
I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtubeNo, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key. -
I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?
If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem -
i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?
Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M. -
trying to add podcasts to shuffle I tunes says they are there but when I play them only a few are available?
Hello rhdarby2,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod shuffle: Playing audiobooks and podcasts
http://support.apple.com/kb/HT1831
Adding Audiobooks and Podcasts to iPod shuffle
The Autofill feature of iTunes will not add audiobooks and podcasts to any iPod model. They can be manually added by dragging them to the iPod shuffle in iTunes.
For iPod shuffle (3rd generation), you must enable Manually manage music in the Summary tab to drag songs to iPod shuffle. Additionally, you can automatically sync audiobooks using the Music tab and sync podcasts using the Podcasts tab in iTunes.
Have a nice day,
Mario -
I am trying to update my apps but it is asking for my card details and when i enter them it says my card was declined but i havent bought anything, can i see what the purchase is for?
Again, Apps will always be tied to the account from which they were purchased and will always have to be updated using that account.
Always, mean exactly that, always.
If you want them to be on your account then you need to buy them using your account. -
How can I find movies created in past versions of iMovie? They are still on you tube but I want the original higher quality versions and I can't find them anymore.
Paul -
I'm sorry you've lost files, but when you set up an account as Guest, there's a message that clearly states "When a guest user logs out, all information and files in the guest account's home folder are deleted". If you want an account where files are retained, you should create an Admin or Standard type.
You will need to use data recovery techniques to see if your file can be recovered. The more that you use your computer, the greater the risk that the file will be overwritten. You can contact a professional data recovery service such as DriveSavers (which will be expensive, but you can judge the value of the file) or try something like Data Rescue. The latter has a demo which you can install to determine if your file can be recovered, and then, on purchase, you can actually recover the file.
Good luck!
Matt -
I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
ThanksThe netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you. -
Hello, I have changed my apple password recently. But when I am trying to install application it is showing your password is incorrect. But I can sign in . Please help me?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh
Maybe you are looking for
-
how to display month end date for every month by default?
-
Hi Gurus, I would like to add a column to my report. Any ideas as to how to go about it in Report Painter ? Regards
-
Does anyone know where I can find a floppy with System 6 on it so I can run my Mac Plus again? I don't know what happened to my system disks. When I boot with my System 6.08 tools disk it doesn't work. I'd love to play Loderunner again.
-
How to Programmatically generate .asdatabase from SSAS database from SSAS server?
Is there a way to Programmatically generate .asdatabase file and other ssas config files from SSAS database? Not by devenv .dwproj.
-
Comcast mail on mavericks locked out
Why comcast mail on mavericks locked out