I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8). I am using LiveCycle version ES (installed with Adobe Pro 9). I can open the fhe form, but the tools are greyed out. It apears the file is locked for editing, but I cannot determine where/how to unlock it.

You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Similar Messages

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I have adobe xi pro, but i can´t edit a form create with adobe 8.0, the message is this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

If the form was created using LCD then it can only be edited there. This
application used to be bundled with Acrobat Pro, but that's no longer the
case. So if you want to edit this file then you need to purchase it, yes.
On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]>

Unable to edit Data Forms in EPM 11.1.2.1

Hello Gurus,
I have recently exported the form from EPM 11.1.1.3 and have imported it to EPM 11.1.2.1 successfully without any issues.
I then checked the Data forms to see if the forms load properly and I have observed that it is not using the Alias dimensions for the Page/Point of view dimensions.
Now when I try to edit the form I get the following error/message. I am not sure as to how I can edit the form.
You cannot edit an ad hoc grid from this context. If you have an Ad hoc grid creator role, open it, and use Save.I am not getting as to how I can edit this form so that I can select the option to use Alias in the data form settings
Thanks
HyperEPM.

Hi HyperEPM,
To solve your problem, try to follow these steps:
1. Create a report into the EPM 11.1.2.1 platform. Then export it.
2. Open a report exported from EPM 11.1.1.3 platform and copy all the "query" tag (<query>...</query>).
3. Select all the "query" tag from the report you've exported from the EPM 11.1.2.1 platform and paste the tag that you've copied in the previous step.
4. Import the updated file.
Regards,
David Mendele.
BI / EPM Project manager at Business & Decision
Lima, Perú

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Can I edit a form created in Adobe Designer/livecycle in Acrobat Pro. 8

Hello
I have a client that sends me PDF's created in LiveCycle. IN the past I've used the following information to open these files.
You can however create a workaround if you absolutely must edit an LCD form in Acrobat. If the form is not a Dynamic form, open the form in Acrobat and choose Document | Extract Pages. (You'll know if the form is not a dynamic form if the Extract Pages command is not grayed out). The extracted pages will not permit accessing the form objects in Acrobat. All scripts in the document are lost and naming conventions for field objects are bizarre. However, the form is editable.
If you want to convert an LCD dynamic form to an editable Acrobat form, you need to use Acrobat 7 Pro. This won't work in Acrobat 8. In Acrobat 7 Pro choose File | Create PDF | From Web Page. Open the form in the Create PDF From Web Page dialog box. Again, all scripts are lost and field object names are bizarre, but you can edit the form in Acrobat 7 or 8 Pro.
But these files must be saved as Dynamic pdf's. I have tried saving them as static forms but the Document | Extract Pages is still greyed out when I open in Professional? What gives how can I get around this most annoying situation? I need to get the extract pages from being greyed out?
Thanks,
Dan

Acrobat 8 Professional includes LiveCycle Designer 8, so if the form was created with LiveCycle Designer 8 or older, the yes should have the option to edit the form. Acrobat 8 Professional under the menu option 'Forms' will have an option to open the form in LiveCycle Designer. If the form was created with a newer version, there could be some issues with newer features not available in version 8.

Need to edit a form created in Adobe Acrobat Pro X

I created a form in Adobe Acrobat Pro X but now I can't edit the form questions, I know I'm missing something obvious but its driving me nuts right now.

here is a link to the file:
Wikisend: free file sharing service
I want to be able to edit the following:
I Squared R, LLC
Meeting Attendance Form
1-901-0001-00001 Revision 1
and pretty much everything else... I created the file a while ago but I cant remember how to edit the file and I really don't want to have to redo everything again. As far as i can figure out the file isn't locked or anything. Any ideas?

Ability to edit a form created in Forms Central

When I open a form created in forms central in acrobat pro XI, how can I get permission to add a watermark? The system says I do not have permission to make the change. That makes sense, but can I save it in Forms Central with a password that would allow me to further edit it is Acrobat Pro XI? Is there an alternative solution?

Hi;
This FAQ describes how to edit a FormsCentral PDF in Acrobat: http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh

I am unable to edit my form

Why can't I edit the form previously created in forms central?

Was this an HTML form or did you convert it to PDF? Were you the original author or was the Form shared with you? Can you share a link to the form so we can have a look at what might be causing the problem?
Andrew

Enabling Usage Rights In A Form Created In Older LC, But Updated In Newer Version of LC

Has anyone run into the situation where updates have been made in a form that was originally created in an older version of LC with a newer version not enabling the usage rights for Reader? I have a form that I created that was done in an older version, and I recently needed to make updates to it, and I now have Adobe Pro X. Anyone who has Adobe Standard or higher can access the form and fill it out, but if someone only has Reader, they really cannot do anything with it. It has created a problem in my office. Once we figured out what was going on, I had to find someone with Adobe Pro 8 to pull up the form and enable the usage rights in Reader. I'm really hoping it is that I am missing something, but I don't know.
Here is how the form is set up as a default:
Thanks for any help that you can give me!
Maribeth

Sorry it took me so long. Things have been crazy, but here's what you do:
File > Save As > Reader Extended PDF > Enable Additional Features...

Are Distributed Forms created in Acrobat XI Pro compatible with Response Forms in Acrobat X Pro?

I want to be able to use distributed forms (created in Acrobat XI Pro) that I have received back through email with Acrobat X Pro. That is, I want to be able to import the form information that is being sent back to me into a response form in Acrobat X Pro. Is this kind of "forward-compatible" issue possible?
Or, since I created the distributed forms in Acrobat XI Pro, can I only import data from those forms in an appropriate response from in Acrobat XI Pro?
Thanks!

The distribution technique for email, network folder, or internal server haven't changed between Acrobat X and XI so you should be able to do this; however, it won't be managed through Tracker because you're distributing the form through different programs.

Unable to edit New form if fields/Columns are more than 60 or 65

Hi SP Gurus,
I am facing very unusual problem which is I am not able to eidit NewForm if fields/Columns are more are more than 60 or 65.<o:p></o:p>
https://support.office.com/en-au/article/Create-a-custom-list-form-using-SharePoint-Designer-917d8fdb-ee00-4441-adb3-a94612d1d105<o:p></o:p>
By following above link I have added TestNewForm.aspx and trying to edit but I getting very stupid and unclear error message like this<o:p></o:p>
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer.
If the problem persists, contact your Web server administrator.

Hi,
Per my understanding, the NewForm.aspx is not editable when there are more than 60 or 65 columns in the list.
Is there any warning or error message when editing the NewForm.aspx page in SharePoint 2010(screenshot would be better)?
I tried creating a list contains more than 60 columns, then edit the corresponding NewForm.aspx in SharePoint Designer 2010, it works as expected.
I suggest you create another list and make the test again to see if it is an issue of this list.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Editing a form created with trial version of XI

I have some forms that I have created with the trial version of Adobe XI and now I need to edit them. I keep getting an error that says the file is restricted and asks me to save a copy that is not restricted. When I save the copy, it won't let me edit that copy either.... HELP!!!!

Pay close attention to the saving process. When you save a copy, it makes a NEW COPY of the file, and leaves you with the old file open. You therefore have to CLOSE the file you have open, and OPEN THE COPY.
In general, be sure to save PDF files BEFORE adding the special rights, because you sometimes can't go back at all.

Edit a form created with a template

I created a page by using a template in Dreamweaver. It was an invitaiton form:
http://www.eddieandalice.com/invite.html
I didn't use validation fields (lack of knowledge at the time). I am trying to go back and make that happen however, when I try to add a validation field, it tells me the header is locked andI cannot.
Can I unock the header momentarily or how can I make these changes?
Thnaks in advance,
Rob
Gramps, if you see this, this is the ministry site I will be making the honeypot for.

Open the template for this page (Select Modify > Templates > Open Attached Template) and add these comments into the <head>...</head> section:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Eddie and Alice Smith</title>


<link href="css/main_css.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" /></head>
You have probably deleted these comments when creating the template. These lines allow Dreamweaver to add code into the <head> section. Save your template and say Yes to allow the changes to pages that use this template (or just to the pages you want).
See http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7acda.h tml for more information.

Unable to fill in form created in Acrobat 5

Hi
I created a Word document and then printed it to Acrobat Distiller 5. Then I added form fields in the document in Acrobat 5. When I use Adobe Reader 8 to open it, I can see & type in some of the text fields but not the checkbox fields. Help please. Thanks

Hi again
I thought I would redo the form fields - this time it seems to work perfectly. I think I probably did something wrong the first time.
Thanks

I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

Similar Messages

Maybe you are looking for