I am unable to generate a Dunning Proposal for Promise to Pay items

Please advise how or if its even possible to generate a dunning proposal for overdue Promise to Pay items. Currently after debugging I find that the Dunning Proposal filters out any items that are from open promises. Is there a way to generate the dunning proposal for promise to pay items that are overdue? I'm using ECC 6.0 EhP 4.0 PSCD module

Within SPRO there is some config to define a dunning block for a promise to pay. I would suggest you check here.
FSCM >> Collections Management >> Int with AR >> Promise to Pay >> Make settings for Promise to Pay.
If this does not work, I would assume this is because you are using FI-CA and the config is slightly different.

Similar Messages

Dunning proposal for item and account master record

Dear Friends,
In the dunning proposal list:
Block the line item or remove the block in the current dunning proposal
and also have another statement like Change the dunning and correspondance data of an account in the master record which is not at dunning proposal level.
as per both the statement I have confusion of below statement:
After the dunning proposal has been created, changes to the dunning data in items or master records are ignored in the current dunning run.
is it true?
Please reply.
Thanks and regards,
Mahendra Dev

Dear Deepak,
Thanks for your reply.
My doubt is some changes are made dunning list:
in the sap book its given a changes made at master record and items are not affected to the current dunning level
and only you can block and unblock the items which is affected to the current dunning level.
Is this conditions are ok or not?
Thanks and regards,
Mahendra Dev

Dunning proposal for more than 8 documents using F150

I have a requirement to make dunning proposal for more than 8 documents through transaction F150 in a single run for same or multiple customers but it is not allowing to create .Can somebody please advice what i could do ??
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi Nanditha
According to SAP, BDC is not possible for Enjoy transactions. BDC is based on screen technology where as Enjoy transactions are based on control technology and are not compatible for BDC....So better try to use bapi( BAPI_INCOMINGINVOICE_CREATE)
Regards
Jeevi

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

HOW TO MIGRATE DUNNING LEVEL & LAST DUNNED DATE FOR ALL OPEN LINE ITEMS

Hi,
We need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated) which is different for each and every line item so if we use mass upload (fbl5n) we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID table.. Please share your valuable Inputs how we can go ahead..
Thanks in advance

Hi Mark,
Thanks for your reply.
It is complete a Zcopy of a standard one, but we are facing one or two records are not updating correctly out of hundreds of customers in the worklist.

Unable to generate a PDF file for 1 of 3 books

I'm making three documents (books) in FrameMaker and then converting to PDF. The first two books generated to PDF with no "major" problems. There were a couple of glitches here and there but most were simply operator error. This forum solved two of my problems.
Now, with the third book, I can't generate the PDF and get error messages in the log file. I've gone back and triple checked everything and can't find a thing that's different between this last book and the first two. I've used the same templates and all of the paragraph formats and character formats are identical in all three documents.
I'm setting all of the PDF setup parameters the same. In the Adobe PDF setup, I've made certain that the "Rely on system fonts only..." check box is unchecked.
One of the error messages in the log file says,
%%[ Warning: LucidaSans cannot be embedded because of licensing restrictions. ]%%
%%[ Font vendor (B&H) does not permit this font to be embedded in PDF. ]%%
This would make sense if Lucida Sans font were only used in this one book. But it's used in the first two books as well and they generate as PDF with no problems. In fact, just to make sure, I went back and generated one of the first books over again and it worked perfectly.
The only significant (?) difference in the third book is that it is much larger than the first two. It runs to 150 pages while the first two are 45 pages and 70 pages. But I've worked with books as large as 450 pages in the past.
I've been creating the PDF documents by the FM Save as PDF feature. But because of this problem, I downloaded and installed a trial version of Acrobat X. Then printed to PS file, opened with Acrobat and tried to distill. Got the same results and the same error messages.
My experience with FrameMaker and Adobe in general is that error messages and indicated results may be cryptic and sometimes have absolutely nothing to do with the actual problem. In any event, I'm totally snowed by this one. (I really shouldn't pick on Adobe for that. Microsoft is much worse when it comes to vague and cryptic error messages!)
Sure wish I had a Mac right now. Or Linux. Or...

Thank you very much for the input. That makes perfect sense to me. The Lucida fonts are, indeed, all from Bigelow & Holmes (B&H). So that explains the difficulties I was encountering. Now, here’s where it gets a little weird.
I created the first two pdf files at work. I work about half of the time from home and was trying to create the pdf file yesterday at home. And that didn’t work. This morning, I loaded all of the files back into the computer in the office and tried again. No problem! Created a nice looking 162-page pdf file. Oh, I did say it got weird, didn’t I? Well, the computer at home and the one at work are both running the same version of Win 7 Pro, the same versions of FM10 and Acrobat X. And the Lucida fonts installed (probably the default set with Windows) are all B&H fonts. That’s right; the same on both computers.
Your input was very helpful because I might have continued spinning my wheels for another day or so on this thing. As it is, I’m considering the matter solved because I just won’t try to make pdf files from these three documents at home. The other alternative would be to use a different font. Umm, no, not at this time. All of the body paragraphs are Lucida Sans. What a task that would be! The other alternative, of course, is to spend a few bucks and by fonts for my home computer that have the proper licensing.
Again, thanks!

FBPM unable to generate MT101 - Issuer details for paying CC missing

Hi All,
I am faceing problem to generate DME in MT101 format via FBPM. All settings are fine as I managed to generate DME in MT202.
The error is:
Issuer details for paying company code XXX are missing
Message no. BFIBL02305
Diagnosis
The issuer details for the paying company code 207 are not maintained.
System Response
The payment medium might be erroneous or incomplete.
Procedure
Maintain the issuer details of the paying company code in Paying company code data.
Thanks for your answers!
Regards,
Martins

Thru SE91, we can se that message BFIBL02305 is issued when fields aust1, aust2 and aust3 are all empty. We can find fields with these names in table T042E, so I suppose you have to fill table T042E. This can be done in FBZP, "Pmnt methods in company code"; select the payment method and open the "Form data"; then fill the "Drawer on the form".
("Drawer on the form" = issuer details, so I'm nearly sure it is what you are searching for)

Unable to generate an execution plan for query

Hi,
I created 4 dimension and two measures ,but while Iam trying to create a presentation bean thru' jdeveloper it is throwing an error "unable to Create olap cursor.
My cubes as well as all of my dimensions are getting validated.
Can anybody help me in resolving this

Hi Yann,
You OLAP metadata may be corrupted. Can you please run the bi_checkconfig utility, which can be found here:
http://otn.oracle.com/products/bib/htdocs/tech_notes/bi_checkconfig_tn.html
Hope this helps,
Katia

Unable to Generating a proxy class for the Enterprise Service

Hi ,
I am trying to consuming an SAP XI Web
Service in Visual Studio 2005. I followd this document <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3057b5a7-99d0-2910-8f8f-f357dc4b70b5">Consume ES Workplace Enterprise Services with Microsoft .Net 2.0 and Visual Studio .Net 2005:</a>.
While try to create a Proxy Class for the WSDL file(XI) using wsdl.exe tool it shows the error like this "There is an error in XML document -Value cannot be null Parameter name:name".
If there any way to pass the parameter through wsdl.exe tool .
Regards,
Malini.V

Check for unnecessary spaces in the WSDL file. Especially in xsd:union tags.
I had the following problem:
<xsd:union memberTypes=" xsd:time genericTime" ...
Correct:
<xsd:union memberTypes="xsd:time genericTime" ...
and WSDL.exe was able to generate the proxy class code.
Kind regards
Holger

Unable to generate IDOCs in BD30 for BOMs because of Validity Date

Hello everyone,
I am having a unique issue with our Bills of Materials. After they are created and set to active, they have validity dates that go from 2001 to 9999. When I go to BD30 to distribute the BOM to the external systems I am getting the following error message:
No bill of material exists on 08/25/2009 for 2557B27H02/FBLR/1/01
Message no. BOM014
Diagnosis
You want to distribute BOM 2557B27H02/FBLR/1/01 via ALE. However, the BOM is invalid on 08/25/2009.
System Response
The system does not distribute the BOM.
Procedure
Check the BOM's validity.
If you want to distribute all BOMs with the change status for another key date, enter another valid-from date on the initial screen.
If you only want to distribute a certain BOM with the change status for another key date, enter another valid-from date or a change number on the selection screen.
We get this for any BOM in this system.
This is our QA environment and do not have this problem in our Development system. BD30 finds the BOM we specified but claims it is invalid on that date.
We are trying to figure out if there is another status or approval step that I am missing here.
SAP v4.7 level 19
Thanks and points awarded for helpful answers!
John

Hi
Enter a lower validity date like 8/25 2004 and try. If not check if there is any change management activated. Also check the ignore distribution lock. Please revert for further discussion
Krishna

Unable to hotsync Centro with Palmdesktop for Contacts and Calendar items.

I cannot hotsync my Centro Contact and Calendar items with the Desktop for more than 3 months even with the help of the Palmone support team.
I tried many version of the Palmdesktop,v4.1.4,v4.14e,v6.2 with no avail. No help from DBfixit program. Only backup and Memo data can be transferred to the PC. The hotsync failed to finish the complete backup for unknown reason.
Can any expert user help? I must use the same User Name as I have a lot of third party program installed.
Post relates to: None

If you have Verizon, make sure Wireless Sync (on your device) is disabled.
Post relates to: Treo 800w (Sprint)

Promise to Pay not creating a dunning block

Hi,
I inserted the dunning block in config in the 'Make Settings for Promise to Pay', however when I create a promise to pay 9even when its broken) the dunning block does not update the line item (where i would have expected it) nor does it update the amster record. We also have BTE 0001765
Has anyone come across this before and can you point me in the right direct for this to work, thanks
Eoin

sounds like it is working according to the SAP Help from F1
Dunning Block for Items with Open Promises to Pay
Use
Has the effect that no dunning notices are sent to a business partner for an item if there is a promise to pay for the respective invoice and the promise to pay can be kept within the agreed deadline. The tolerance days are taken into account.
Dependencies
If you have entered a dunning block, during the dunning run, the system checks whether there is a promise to pay that is not overdue for the invoice of an item to be dunned. If this is so, the system excludes the item from dunning using the dunning block entered.
You can reset the dunning block when you are processing the dunning proposal. Therefore, we recommend that you create special dunning blocks for promises to pay. This enables you to differentiate these items when processing the dunning proposal.
Technical information
The integration with dunning is implemented with Business Transaction Event 00001765 (Publish and Subscribe). The event can be implemented more than once. This means that you can influence the system behavior delivered by SAP without modifications.

Purchase Order Maintainer is unable to generate reminder / urging message

Hi all,
Purchase Order Maintainer is unable to generate reminder / urging message for purchase order.
In material mater reminder time is set as well in vendor master partner function is set.
But in ME91F message is coming like "Not possible to generate urging messages for all documents"
regards,
Nitin Patil

Hi,
The PO output should have been successfully processed before the urgig message to trigger.
The order generally is
PO output, urging and then reminders

Dunning Proposal-FPVA

Dear Experts,
I am doing the dunning proposal, when i have checked in the application log there is no dunning notices in the dunning proposal.
I am getting the message "Dunning Notices in Dunn. Prop. 0". There is no incoming payment method and lock in the contract account master data.
Could anyone give some idea please?
Thanks & Regards,
Aswin

Hi Amlan,
1. I have checked the dunning history table there is no item in that table.
2. I have activated the "additional info" i am getting below listed messages. But I am not able to get any info relevant to the error.
ID     No.     Message Text
EMMA     11     Start business process Dunning Proposal for Business Partner 2082
>3     226           1 dunning group(s) created
>3     346           No dunnable items in dunning group
EMMA     11     Start business process Dunning Proposal for Business Partner 2082
>3     226           1 dunning group(s) created
>3     346           No dunnable items in dunning group
>3     535     FICA Dunning Proposal Run
>3     535     22.05.2011 73
>6     372     Computer sapsbx, job name MAHN2011052273_001, job count 13060101
>3     248     Job no. 001, reconciliation key 1114273   AA
>6     378     Job started as update run
>6     354     Mass activity started: Interval 1 from 0000000001 to ZZZZZZZZZZ, activity type MAHN
0     18     COMMIT successful
MASSACT     101     Selected Item Groups         1
MASSACT     101     Selected Items         1
MASSACT     102     Accounts with Dunning Lock 0
MASSACT     102     Accounts with Posting Lock 0
MASSACT     101     Dunning Groups to be Checked         1
MASSACT     102     Groups w/o Main Receivable 0
MASSACT     102     Dunning Notices in Dunn. Prop. 0
Thanks
Aswin

Unable to create a catalog file for Windows 10 Enterprise (9926) using latest ADK

Has anyone successfully created a catalog file for Windows 10 Ent. Preview build 9926? Ii get persistent failures attempting to do so. Log output is below and any hint would be greatly appreciated.
7:20 AM : This application requires version 6.3.9600.16384 of the Windows ADK.
Install this version to correct the problem
7:33 AM :
7:33 AM : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows ADK User's Guide.
7:33 AM :
7:33 AM : System.ComponentModel.Win32Exception (0x80004005): Unknown error (0xc1420117)
Server stack trace:
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PostCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CatalogCreatorImpl.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.ICatalogCreator.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at Microsoft.ComponentStudio.CatalogGenerator.CreateCat(ProgressDialog pd, Object o)

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I am unable to generate a Dunning Proposal for Promise to Pay items

Similar Messages

Maybe you are looking for