I am unable to launch Elements 8 on my MAC OS 10.9.3. Downloaded Licence Recovery App" Tried to run Licence Recovery Launcher and get message 'can't open app"Licence Recovery Launcher" because Power PC applications are no longer supported" Don't
Can anyone advise if I am too far behind in releases and will be unable to use my Elements 8 on this OS?
I included a link in my previous response and this is not allowed. I have attached a screen print of where I got the link for the Licence Recovery App.
Similar Messages
-
I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported. How can I retrieve them"?
Here is a post I assembled for another with a similar problem:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PPC software or Lion/Mt. Lion;
3. Upgrade to an Intel compatible versions of your software, or find alternatives that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales.. -
Pages software in 10.8.3 does not support previous work done on microsoft office 2004. Pop up says -- You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported. What can I do now?
Use Numbers, OpenOffice, LibreOffice, Microsoft Office 2008 or newer, Google Docs, or similar tools to open the files.
(85829) -
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
GiraffeHero wrote:
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
Ralph Landry1 wrote:
The only viable solution is to upgrade to the latest versions of the PPC legacy software that will run under Mavericks.
Except for the other viable solution:
If you are unable or unwilling to upgrade to a version of Filemaker that runs natively under Mavercks, you can run your existing version of Filemaker by installing Snow Leopard Server into Parallels:
[Click on image to enlarge]
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564 -
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
jennyba wrote:
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation. -
I can't install Rosetta Stone onto my new Mac OSX (version 10.7.5)
Any suggestions?
The message says "can't open application because Power PC applications are no longer supported."
Thanks!Thank you... spoke to Rosetta Stone and they said the same thing, and the give a nice discount when upgrading.
Normally 5 levels of a language run about $479. When upgrading, you can get the same 5 levels for $199.
Fewer levels costs even less. -
Since downloading osx v10.7lion every time i try to connect to the internet using BT Broadband i keep getting a message saying
" you cant openthe application ) because Power PC applications are no longer supported." this is very annoying as i likeBT and the way it opens with all the local up to date news plus other apps +++
Please can anyone help me as apple will not help unless i sign up for a new product agreement which i cannot understand as every thing worked before this so called very latest software that everyone cant do without ?????I had the same problem with some apps and printer setup software. SInce Rosetta has been discontinued on Lion my only solution was to restore to 10.6 since the manufacturers either have not yet or will not release updated apps. In this case you have to determine how important those old PPC apps are to keep around and if there alternitives that are available to replace the functionality. I would expect a broadband provider to update thier apps if it is something that is required to connect.
Mike -
i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
'You can't open the application Window Media Player because Power PC applications are no longer supported'. What do I do?
Latest version, 2.4.2.4: http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
Needs QuickTime 7 at the least... -
This was immediately after I downloaded Lion. None of the other applications open, I'm getting a similar error message. I can't get online either.
PowerPC emulation has been dropped in Lion. This is one of the big reasons people try to downgrade back to SL.
-
What do I do to fix this error? Can't I use MS anymore?
You have many choices, the least attractive in my opinion is to upgrade M$ Office to the newest version.
Look into Pages ($20 from Apple), NeoOffice, or OpenOffice (both free). All open and save MS Word formats. -
Can't open MS Word because Power PC application are no longer supported?
I've just upgraded to Lion and it shut me out of Excel, Word and PPt. Am I missing something?
You need to upgrade to Office 2008 or newer, switch to a product such as OpenOffice or iWork, or if you really want to, use a product such as VirtualBox to run Mac OS X Server 10.5 or 10.6 in emulation.
(60419)
Maybe you are looking for
-
What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??
Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated. I am thinking o
-
Creative Zen 8gb -- doesn't works/no chargi
Hello, i've just received CreativeZen 8gb for christmas. I'm very happy, but i have problem with it. Yesterday i putted it charging in agreement with included tutorial for 4+hours. When i wanted to turn it on after 4 hours, nothing happened, on/off b
-
Please Fix: copy paste footnotes
When Apple updated Pages to 5.0 it broke a feature that I and many others use. In using Logos 5.0, software that I use for school and work research, when I copied a section and pasted into the previous version of Pages (including the current version
-
This problem is driving me bananas. I'm getting the dreaded "The file 'iTues Library.itl' does not appear to be a valid iTunes library file.." All of my media lives on a Lacie external drive. I've saved all of the media to my desktop, wiped and re-
-
Hello, I am attempting to play a game that has previously run fine on my other windows 7 PCs, but when I try to start on this one I get the following crash error. **I have tried to enable DEP and add trgame.exe to the list with no luck. Problem signa