I am unable to see a project on the i Movie player screen

I am unable to see any project (saved or in process) in the player screen of i Movie.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Similar Messages

Unable to see any Tasks in the WCB or in Telnet.

Tasks are not getting generated in WCB and also in Telnet.
All the task setups are done.
Shipping transactions form --> Status is Released to Warehouse.
But unable to see any Tasks in the WCB or in Telnet.
can any one help me.
Thanks and Regards,
KVR

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

I am unable to see Shopping cart in the Purchaser's Worklist

Hi All,
i am unable to see Shopping cart in the Purchaser's Worklist after Approval, the status shows "In Purchaser's Worklist".
can any one tell me what will be the problem
Reg.
Ravi

Hi
I think, the user is having authorization role problem or Do this
Also check, in the Extended search option, include the options, Bought on behalf of as checked ('X') and Include Completed Shopping carts as 'X' with Time Frame - (LAst Year) and Status = ALL
Refer to Transaction BBP_MON_SC (Monitor Shopping cart ) to check it whether it's pending in with whom and at what status.
Also, alternatively, you can refer to BBP_PD transaction, Specify the Shopping cart number there in the Object_ID field and you will get the details.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Unable to see my project template after creating the same

Hi All,
I Created one (Multi Org)Organization and enable all the required secutiry profiles (HR: Business Group, HR:Security Profile, HR:User Type,MO:Security Profile),When i am creating the Project Template unable to see the same template its moving to some other Org its showing.
what i have to check in setups. could you please any one.
Thanks

Hi Murali,
Can you check whether you have setup the following profile options for that responsibility to see the created templates.
PA: Cross Project User -- Update
This option allow you to update the project with out assignment on the project.
PA: Cross Project User -- View
This option allow you to view the project templates by using that responsibility.
Best Regards,
Sreenath

Unable to see an iView in the Portal

Hi All,
I have a scenario, where in I have an iview in a page, the page can be in the workset,this workset has assigned to a role, and this role has been give to a user,now I have a user login to the portal , i am unable to see the iview in the portal, what could be the possible reason?
Regards
Chandra

If U r not getting the Role navigation structure in the portal then make sure that the "Entry point" for the role has been set to True.
If you are getting the Role structure in the portal but not getting the iView then check the iView Property "Invisible in Navigation Area" property set to false.
Next you can check for the iView Permission , if the User has permission for te iView or not.
Hope now u can get the iView in the portal
Cheers
Chinmaya
Reward for helpful answers

I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
Roger

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

Unable to see imported RFCs in the BPM

Hi,
I want to invoke a BAPI from a BPM, but I am unable to see the BAPI request / response interfaces in the BPM.
I am trying to create Containers and Transformations in the BPM, but I am unable to select the BAPI request / response interfaces.
What do I need to configure to invoke BAPIs from the BPM ? thanks,
-Manish

Hi Manish,
you need to create three things:
1. An abstract synchronous interface with the same message types as the BAPI
2. An abstract asynchronous interface with the message type of the BAPI request
3. An abstract asynchronous interface with the message type of the BAPI response
From 2 and 3 you derive Container elements and use it for request and response of the synchronous interface.
Regards
Stefan Grube

Unable to see Subject Areas in the Manage Privileges

Unable to see Subject Areas when tried to set permissions for the Subject Areas using Manage Priviliges option under Administration.

Hi,
This is the Data Mining forum.
If your question is about OLAP, then try the OLAP forum.
OLAP
Thanks, Mark

Unable to see sales organization in the t0code bp

Hi Gurus,
i am trying to upload the sales area data through the fm crmx_if_partner_save for the role crm000 (sold-to-party).the fm is creating the bp but i am unable to see it in the t-code level.
Please help.

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

Unable to see substituion variable in the reporting studio

Hi,
I have added substitution variable to the reporting studio the variable name I gave as var1
and value as 2009,but I am unable to see the substitution variables in my reporting studio.
What can be the reason for it?
Thanks

Hello,
you have to quote the value because it doesnt start with a letter.
Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
Bye
Kevin

I can see my project in the movies folder but cannot open it, why?

I have been working on a project for three hours, the FCP quits unexpectedly and when I restart the prgram the project is gone as if I never started it. I can see the project in the Movies folder but it will not open. What am i doing wrong?

Can you provide us with a screen grab of the folder so we can see the current structure.

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

MW 2.08: Unable to create a Project in the MW after creating a customer

error from Apache logs for this issue:
Ranga: [Thu Dec 27 23:49:15 2007] [error] [client 10.200.200.41] [ecid: 1198779553:192.168.5.14:23842:0:19,0] mod_plsql: /pls/EOF/Eof_Manage_Instance.insert_record HTTP-404 ORA-29541: class MW.oracle/support/mw/SupportRuntime could not be resolved\nORA-06512: at "MW.EOF_TOOLS", line 2388\nORA-06512: at "MW.EOF_TOOLS", line 930\nORA-06512: at "MW.EOF_MANAGE_INSTANCE", line 841\nORA-06512: at "MW.EOF_MANAGE_INSTANCE", line 353\nORA-06512: at line 23\n
Invalid Java class that we are unable to compile:
SQL> select * from dba_errors ;
OWNER NAME TYPE
SEQUENCE LINE POSITION
TEXT
ATTRIBUTE MESSAGE_NUMBER
MW /a7446180_SupportRuntime JAVA CLASS
1 0 0
ORA-29521: referenced name oracle/support/mw/StreamGobbler could not be found
ERROR 0
Please help to resolve this issue.
Thanks
Ranga
~

Sounds like the Java Packages did not load properly. I would log in as the MW owner and do:
 
cd $EOF_HOME 
. ./EOF.env 
cd config 
export EOFPASSWORD <your passwd> 
./load_mw_java.sh LP 
 
and see what it says. That should reload the java into the DB. Then try your operation again TWICE. (The reason for trying twice is that most times, java will give an error the first time you use it after loading it into the DB, but will work fine the 2nd time.)
 
-Vikki 
Product Manager for the Maintenance Wizard

When I send a webpage via email, some of my recipients are unable to see it properly. The website was made with iWeb, and a Mac person advised me this was the best way to do an email campaign with iWeb, but it's not working for a lot of my customers - why

I have recently created a website for my family's business. When we bought the Macbook the guy in Apple said the best way to send an email campaign to our mailing list was to publish a hidden page, find it in the browser on Safari, then share it via email, so that is what I do. For most of my customers this works fine, however I have a number of people each month who cannot see any of the content of the email. I have added an 'If you can't see this email properly...' link at the top of the page, with no shapes or images etc near it, but even that does not appear for them.
I am a self-taught novice unfortunately, so haven't a clue what the problem is. I'm not sure of the operating system, but we bought the Macbook in May and it has all the recent updates installed. I have just had a new baby so can't get into the store fdor a one-to-one, so if anyone could explain why this happens / what I can do about it, I would be very grateful! Thanks!

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Unable to see text data in the reporting bw 3.5

Dear Gurus,
My clinet wants to see the text data for all the records in the reporting.unfortunately he cant see text data for only 5 records in the colum. i checked in the query designer for that object ,in properties its given as key and text. can any one suggest me why the text data is not comming for only that records..
Thanks in Advance.
Srikanth.

Dear Pavan,
Thanks for the reply, the query properties are already set like key and text before, the problem text is showing to all the records except 6 records,for this 6 records in the place of text it is showing only same technical name..please guide..
Thanks,
srikanth.

I am unable to see a project on the i Movie player screen

Similar Messages

Maybe you are looking for