I am unable to set up voicemail on my iPhone 5

Hey, I tried various time to set up voicemail service and the same message, "unable to save voicemail," pops up every time. Has anyone had success with solving this issue?

lizdance40 - I have had the phone for over thirty days so I did wait over that time, why is that? Is there a different protocol once thirty days is past?

Similar Messages

  • How to set up voicemail in my iPhone 5

    How to set up voicemail in my iPhone 5

    Voicemail is a carrier feature.  Contact you carrier for directions for setting it up.

  • Unable to set up voicemail

    I've tried following the instructions on setting up voicemail on my new 3G iPhone. I put in a password, enter it again, and then click Default. After a few seconds it tells me that there is an error - "Password Error - the old password is incorrect." As I haven't successfully entered a password, this is clearly not correct!
    I've even tried to go into settings to change the password (as suggested in the iphone guide), but that option isn't available).
    Help!

    Hi,
    If you are on O2-UK the default passcode is 1875, then you change it.

  • Unable to set up iCloud email on iPhone with apple id as a yahoo email?

    I set up my wife's iPhone with the new iOS 5 software. Her apple id is a yahoo email address. I also set up a @me.com email address for her and merged it from MobileMe to iCloud. However, I am now unable to have her phone set up with the new @me.com address and I am unable to change her Apple ID from the yahoo address to the @me.com.

    Its really straight forward.  My Galaxy s5 started at 4.4.4 and now is at lollipop 5.0. 
    You are talking to fellow users and ones using residential products.  IF you are a Verizon Wireless user you might do better to ask there.  https://community.verizonwireless.com/welcome
    You may have been caught be the recent retirement of some of the old servers rather than the upgrade to 4.4.4.‎
    Triple check your email configuration
    http://www.verizon.com/emailsettings
    if not using Verizon/yahoo email
    outgoing smtp.verizon.net port 465 SSL plain txt passwords
    incoming pop.verizon.net port 995 ssl plain text passwords.
    Not if you happen to use the Yahoo interface to Verizon email its
    outgoing outgoing.yahoo.verizon.net port 465 SSL plain txt passwords
    incoming incoming.yahoo.verizon.net port 995 ssl plain text passwords.
    Someone recently posted a step by step for android in another thread.  If you can't get yours to work, you might want to search this forum for it.

  • Unable to set up security questions on iPhone 4

    I have a new iPhone 4. I am trying to set up my 3 security questions so that I can download apps. However, when I click on the third questions, it turns blue, but doesn not show me the options, I am therefore unable to complete the screen and download any apps. Wehn I visit the apple ID website, there is only an option to set up one question rather than three.
    Can anyone help please?

    A quick Google search tells me that Webmail is an Earthlink system.
    Perhaps one of these POP server settings will work?
    http://support.earthlink.net/email/email-server-settings.php
    If you have an IT department or Internet administrator within your company, they may also be of assistance.
    Best of luck!

  • Unable to set up email account on iPhone

    Hello everyone,
    Please bear with me because I am new to the iPhone and a recent convert from Blackberry. OK, here is my problem.
    I have 3 email addresses, 2 of them have set up just fine and dandy on my iPhone, the third refuses to get past the bit where you type in the imcoming and outgoing server bits (I've copied the setting exactly from Microsoft Outlook so I'm pretty sure I'm doing it right). It says that 'secure connection failed' and that 'the certificate may not be valid', I've tried clicking on continue anyway but nothing happens, it just tries for ages to verify the account. I'd be grateful if someone could please help.
    Best Wishes,
    Jules

    A quick Google search tells me that Webmail is an Earthlink system.
    Perhaps one of these POP server settings will work?
    http://support.earthlink.net/email/email-server-settings.php
    If you have an IT department or Internet administrator within your company, they may also be of assistance.
    Best of luck!

  • Setting up voicemail on my iPhone

    I have a friend whose grandson made her incoming voicemail message a garbled mess.
    She would like to redo the message ASAP.
    HOW CAN WE DO THIS?????
    I know this is simple. Please help.
    Evan Jacobs

    Change your greeting:
    1. Tap Voicemail, tap Greeting, then tap Custom.
    2. Tap Record when you’re ready to start.
    3. When you finish, tap Stop.
    4. To review, tap Play.
    5. To rerecord, repeat steps 2 and 3.

  • When i try to set up voicemail iphone says voicemail error try again later

    i tried to set up voicemail on my iphone 4 and it just displays a message saying voicemail error try again later

    You can also call you voicemail by just calling your phone number.  Follow the instructions and than you will be able to be set your password and greetings.  If this does not work, go to your celluar carrier and apple and they will be able to help you.

  • Unable to  set some dates  in Adobe bridge cs2

    HI ALL
    Our keywording team using  the  Adobe bridge CS2.
    Kindly  hep me to understand Why  some dates  Like
    1/1/1970
    1/1/1642
    1/1/1890
    etc  .....
    I unable to  set in  ITPC image Tab  information .............
    Lakhan

    Hi
    Thanks for revert ......
    I  tried   with  CS2 & CS3  but only  specific  dates like (1/1/1970) i above  mentioned  is still  not   reflecting in IPTC image  info   ........
    Please suggest....

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • Service Desk Unable to set status to Customer Action and Proposed Solution

    Hi Everyone,
    We are unable to set a service desk issue to the status Customer Action or Proposed solution.
    I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
    I have checked the following:
    1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
    2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
    3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
    4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
    Your assistance is greatly appreciated.
    Michael

    Hi Michael,
    please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
    You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
    If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
    Hope this helps,
    Christoph

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • Unable to set  kernel parameters using solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • Unable to set kernel parameters using Reource Control in solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

Maybe you are looking for

  • H/T make it so a contact can no longer see convers...

    my private conversation with said "contact" is sharing our conversation with other people. i need a way that will not just delete what i see as our history, but the history for the "contact". actually i would rather keep the history for myself, but b

  • Ipod not working properly after ios6 update

    I recently updated my ipod touch with the ios6 update, and now most of my apps wont open, and others shut down after a few seconds including the app store and itunes! is there any way of reversing the update? or fixing it without having to go to the

  • How do I buy photoshop for mac without creative cloud?

    I get it - Adobe wants me to subscribe to a monthly or annual plan for their creative cloud. I don't want that, though. I usually work offline. All I want to do is install Photoshop (CS5 would be fine) on my MacBook Pro. I'm not finding anywhere on A

  • A Important problem about CMS Transport Studio Test Tab

    Hi experts:     I am use NWDI and modify ESS source code, when i check in my  modified project like esstratre and release  it .  In CMS  transport studio i consolidation , assembly it then test it .but i make a  fatal mistake,there is some mistake in

  • Motion 4 Template problems

    I am using Motion 4 and however nothing happens when I am trying to open certain templates.  What could that to happen and how could I fix it.  I am on mac os x version 10.5.8