I am unable to use Iboost app, when i try to use it, I get an error "iBoost App is damaged" and reinstall from app store. I get the same error even after installing a fresh copy. Need help to resovle this issue.
“iBoostUp.app” is damaged and can’t be opened. Delete “iBoostUp.app” and download it again from the App Store.
Because of the above error, i am not able to use iboostup application. I have even tried to reinstall from app store, but the issue still continues.
Need help.
Perhaps the damaged file is an auxiliary file outside the app bundle and stored elsewhere on your Mac. Try deleting the app and all it files with an app for that purpose. Afree one is AppCleaner;
http://www.freemacsoft.net/appcleaner/
Similar Messages
-
After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How do I correct this. I am using Windows 8.1 . My wife has never had an iTuunes account
Hello Lakesidetom,
It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
How to find your Apple ID - Apple Support
Use these steps if you forgot your Apple ID or aren't sure that you have one.
Apple - My Apple ID
If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Installed the iTunes 10 update on my computer (Windows 7). iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. What's the fix??
Hi sahgin,
The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply. -
When i update my IOS7 i lost my all pic from my IPAD2 can anyone suggest how to get back those pic? and i don,t think so i did kept back up before i update ios7. can anyone help me for this issue?
The photo's in your camera roll would be in a backup, if you have one (iCloud or iTunes). If you did not keep a backup somewhere, they are gone. Sorry, but that is the way of any data - if you don't have a backup of it somewhere, there is nothing to restore it from.
All other photo's should be on your computer somewhere anyway - whereever you had them to sync to the device originally. -
My email keeps loading the same emails even after deleting them. They keep coming back everytime I start up the mail app. What can I do?
After you delete them, empty the trash before they re-load.
-
My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.
Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My sister and I share computers, but it's really her Mac because she got it for her birthday. I'm using it because there is no other place to hold my iTunes library, documents, photos, etc.
She complains that I make the computer too slow after I downloaded/installed too many apps from the Mac App Store using my admin account and my iTunes account. However, they show up on her account as well, and she doesn't want to see them or have her computer slow down, so she deletes them. Is there a way to make certain apps unseen and inaccessible from other admin users on the same machine?Only by storing them on an encrypted disk image. Anyone who has an administrator password to a Mac can use it to access all unencrypted data on the system.
(59941) -
Can we remain in the same state even after clicking submit button?
Hello All,
Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
Expected Result : should remain in the same stage
Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
Please help.The above answer was proved wrong, so please follow this link to get the answer.
http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog -
My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in
If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this. -
HT204389 Siri sounds like beta Siri after installing a fresh Copy of iOS 7.0.2
I have a 32GB iPhone 5s on AT&T I recently installed a fresh copy of iOS 7.0.2 and now Siri does not sound like the new Siri she has the robotic voice again. I have went to Settings>General>Accessibility>Voice Over(Which is off)>Languages & Dialects>Default Dialect(Set to U.S. English) and turned enhanced voice on. I watched it download the enhanced voice. Still the same thing. I have powered off the phone and powered it back on. Siri still sounds like the siri of old. I have performed a hard reboot. Siri still sounds the same. When I first got the phone she sounded as advertised. Is there anything else I should try?
Hey hmj9007,
Great question. After restoring or updating a device, the system initially uses a more compact voice while the natural-sounding voice is downloading:
About Siri
http://support.apple.com/kb/ht4992
Can I change how Siri sounds?
Your iOS device initially uses a compact voice for Siri. Your device will automatically download and install a more natural-sounding voice when you first connect to power and a Wi-Fi network.
Change the gender at Settings > General > Siri > Voice Gender. The voice genders that are available vary by country and region.
Change the language at Settings > General > Siri > Language.
If you change either of these, the new enhanced-quality voice will download when you connect your device to power and a Wi-Fi network.
Thanks,
Matt M. -
FCE 4.0.1 won't open when I click the icon in the Dock or in the Applications icon of FCE. It had been working well but I had trouble when I trashed the reference Scratch disk to a project and I was asked to get it back. I checked all my drives through verify in Disk Utility and a couple needed repair - eventually were given the OK. I then Shut Down and rebooted, I then trashed the FCE App and reinstalled from the Install discs and , finally, I tried opening a FCE project. None of these caused the FCE App to open with Browser, Viewer, Canvas,. Time Line. All that happens is the the first FCE window, the one that says FCE registered to...and the other that says loading AE Effects, Video Effects does show but then nothing except my Desktop with it's various folders and files I also downloaded the Plug In Tom Wolsky suggested to a recent query.
All I can think of is to backup everything to HDs and take this iMac in for a service.It is only six months old - I reckon it will be poor driving by it's proud but unskilled driver!
James Bowman
New ZealandDon't panic . . . . . yet!
You may not have trashed FCE properly.
Deleting the application icon is useless as there are a number of files hidden elsewhere which may be corrupt.
Download this free app to uninstall FCE completely and then reinstall it.
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
I know it is called FCS Remover but it also works for FCE. -
What's the best way to (re)install Logic Studio? Need Help.
I bought Logic Studio a few months ago and installed it on my new MacBook Pro 2.4Ghz with 2G Ram, 160G hard drive @ 7200 rpm. Being new to Logic, at install, I just put all 40+ gigs of content on the computer. After a while I considered putting the Apple Loops (roughly 12gigs) onto an external hard drive to save space on my computer, just to see if it would work, then consider moving more content over later. After doing this the Logic application couldn't find the Apple Loops, and I couldn't find a way to help it see the new path, so my Apple Loops were essentially rendered useless (since I had already deleted them from the computer). So I stopped right there, and haven't done anything else. Just worked with Logic without using Loops, which I have to say is still an incredible program.
What also seemed strange was this: In moving the Apple Loops, the available disk space on the computer didn't seem to change much. It went down a few gigs, but not the 12 or so I was expecting. Not sure why that is. It seems like Logic and all the content is actually taking up around 50 gigs or so on my computer (and the Apple Loops are supposedly gone or not available). What is that about?
Feeling like I had really fouled things up, I called Apple Care. They said that the content of Logic is stored in many places in the computer's libraries and system folders, but it was really confusing trying to locate all of it, because the info they sent was from Logic 7 and older versions of GarageBand. I guess Logic 8 is too new for them to have anything on it. There is no uninstall for Logic Studio. But they strongly recommended that I perform an Erase and Install, and then re-install all my software including Logic, and then assign the hard drive I wanted the content in. That would open up a lot of the computer's hard drive space, they said. It seemed like an extreme measure to take for such a small blunder, and I haven't tried it yet, but will if it's the best option.
If I do this, is running Logic content (i.e. Loops, Impulse Responses, Jam Packs, etc.) from an external hard drive (and the one I have to use is 5400rpm--is that too slow or am I getting too picky?) the best way to go, or should I have all Logic material coming from the same machine? How do I get some of my hard drive space back?
Ugh.
Has anyone out there experienced this too? Is there anything documented about where the content is stored for Logic Studio? Is Erase and Install really the best thing to do in this situation?
So many questions...
Thanks.Hey Blue,
Let me see if I can help you a bit.
Logic Studio has 28+ gb of loops. Almost 23 for STP and 6 for the Jam Packs, etc. They should be located in /Library/Audio/Apple Loops/Apple (that's the default install loc.). Copy them to an external drive and then delete them from your main drive. Go to /Library/Audio/Apple Loops Indexes and delete those text files. Now go to /Library/Preferences/Soundtrack Pro and delete those text files, too (more Loop Indexes).
Now open Logic Pro and it will say 'No Apple Loops found'. Click 'OK' and then open your Loop Browser. Drag all the Jam Pack folders, STP folder, etc. that you want to use onto the Loop Browser. Logic will ask you if you want to 'Copy to Loops Folder' or 'Current Location'. Choose 'Current Location'. Logic will now index the loop folders.
NOTE: You can change the names of the folders to suit your liking. For example: I added the 2, 3, 4, 5 after the Jam Pack names to make it look smoother on the popup menu and changed iLife Sound Effects to Sound Effects - iLife and Apple Loops for STP to STP. Now the Jam Packs 1-5 come up first on the popup menu and the FX stay at the bottom. I likee!!
Now, if you like you can take your EXS Factory Samples and Ultrabeat Samples, 3.35 & .889 gb respectively, and copy them to an external drive. I have mine in the same place as my Jam Packs, etc. You can find these files in /Library/Application Support/Logic. Toss out the originals and put ALIASES from the external drive back into the /Lib/App Sup/Logic folder.
Also, if you open STP and click the Search tab in the right pane you will see a button that says 'Setup' next to it. Click that and you can use the checkboxes in the window to activate/deactivate any of the loop folders available.
A clean install is the best IMO if you have a little time because a) you DO NOT have to install GB at all (that saves the .aif file size - Logic Studio uses .caf files at half the size of the originals) b) Logic Studio will install the extra GB or Logic 7 content if you need it at it's reduced size. It will basically get rid of all the old clutter that you do not need. Only install what JP's you want and move the bigger stuff to an external.
Rock up Logic and it should all be in place. That procedure saved me 32.5 gb on my main drive.
NOTE #2: You have another 12 gb (if you installed all Jam Packs) that reside in the /Library/Application Support/GarageBand/Instrument Library/Sampler. These are the Jam Pack Instruments & Sampler files for World, Symphony, etc. They cannot be moved from the startup HD (as far as I can tell). So keep that in mind if you don't want a certain JP.
Hope that helps,
Dave -
I am using iPhoto to edit my pictures from my Canon 60d. As I edit the photos, I send them by email within iPhoto (using the Large setting) to several members of my family. Last night I sent about 20 different pictures with different descriptive titles in the email to multiple people. However, when they view them in their email on their iPhones, it is showing the first picture over and over again, no matter what the title of the email says the photo is. It is even stretching the picture to either landscape or portrait depending on the view of the different pics in each email themselves but is still showing the same pic no matter the orientation.
I need to figure out if this is a bug with iPhoto and iPhone or if I need to do something different. You would think if you choose an image and email it, it would be THAT image. It only began within the last two weeks or so but it has been consistent when emailing multiple single photos. Any help would be appreciated! Thank you!Greetings,
I've seen this issue myself between iPhoto and an iOS device. It appears to be an issue with the how the iOS device sees the email templates used by iPhoto '11's built in email feature.
Suggestions:
Let Apple know you have this issue: http://www.apple.com/feedback/iphoto.html
Go to iPhoto > Preferences > General > Email photos using > MailThis will bypass the email templates and send your images directly from the Apple Mail program. You won't have the pretty templates, but the images will come through (which is the important part in my opinion).
Keep your software up to date on your computer and on your iOS devices. (If / when a fix comes, that's how you'll get it.)
Cheers. -
I need help badly on this issue with OGG
Hi can i get help on this issue? We have set up Active-Active GG on Test Environment.
While testing Golden Gate on Test environment we observed that test module level caching is not working as expected. Generally if a ban number is previously launched then on any subsequent execution of the same ban we should see test modules with timestamps in red color ( which basically indicates it’s been executed previously and no fresh tests are run provided no test module failed with test error ).
Now with GG setup we can see that the Data is getting replicated on both the Data centers but still when we re-launch the ban at second datacenter it does not show us as being cached(i mean since after executing test the DB is updated but on second data center still it tries to re-execute again and again but it doest get cached).
These both environments work fine as a standalone caching but not replicating the test results.
Any idea people?Hi Mike, i have not architectured my application, i am contractor who came to implement Golden Gate in our environment, this is first time i am observing this kind of issue of caching not happening, it is replicating data fine but the cached results once we give any BAN on one side it populates data and it is replicating that data(records) fine, but when we give same BAN on other Datacenter it is executing tests and populating data agiain, which is undesirable.
Can you please tell me from whom i can find out what will be the root cause of this issue, and which team to contact.
By the way thanks for your response, i can give you some log file info which we foud in our application server while working on Golden Gate:
Here are more logs details:
1. Application retrieves data from non-replicated data:
2011-07-11 16:20:29,921|DEBUG| |SIBJMSRAThreadPool : 3|com.test.testViewPlatform.requestEngineExtension.initApplication.InitApplicationRequestHandler|processCachedResult()::Model 'HistoricalInformation' was cached. Returning cached results
2. Application retrieved data from replicated data:
2011-07-11 16:22:01,684|WARN | |SIBJMSRAThreadPool : 1|com.test.testViewPlatform.requestEngineExtension.initApplication.InitApplicationRequestHandler|loadCachedModels()::An unexpected Exception occured while attempting to get cached results for Test 'HistoricalInformation'. The exception follows:
java.lang.RuntimeException: Error deserializing EvaluatedTEST value :
Caused by:
org.xml.sax.SAXParseException: Content is not allowed in prolog.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at motive.ecotest.evaluation.EvaluatedTEST.deserializeValue(EvaluatedTEST.java:113)
... 17 more -
This happens often, and with different sites. I try to visit a site that I have previously visited. Firefox will not go to that site. It seems to attach "https" and then gets lost, or says the site does not exist. When I try to type the correct site name, it changes it to the incorrect name. I end up having to use a different. browser.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Maybe you are looking for
-
COGM Need to be a cost element?
Hai Gurus, In my client both the COGM and COGS are created as G/L Accounts, we activated the Costing basesd COPA. The question is weather the COGM is to be created as a cost element in Controlling? We know that the COGS is not to be created as cost e
-
Delete System error message in MDT automatically
Hi Experts, I would like to seek your help to solve the following problem. I would like to know is there any ways that we can cancel the messages in MDT which falls under "System Error"automatically. For example: Sender:A and Receiver :B I only like
-
I need help! I have two questions........ I recently bought a new Officejet 6500A plus. I have added the eprint service app to my iphone. It does pick up the photos that are on the iphone for printing. Does anyone have a Snapfish account? Is th
-
Timed out but services started
Dear all, When am starting the services as below adoacorectl.sh start script returned failure.. but when I check the services it is up and running as you can see .. any iea Executing service control script: /u01/prod/inst/apps/prod/admin/scripts/adoa
-
Edge Animate Free Trial Has not Been Available for 2 Days.
Is anyone else experiencing this, or is it just a local problem that I am experiencing? When I click the download button here: HTML animation | Download free Adobe Edge Animate CC trial it says: "We are currently experiencing some issues, please try