I am unable to wear my persona selection, even after retarting firefox
I am unable to install any personas, even after restarting firefox. When I click "wear this persona" nothing happens.
Error 3 or 1669
Is your phone jailbroken?
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Check for outdated or modified software
Related errors: 1015, “The required resource can't be found.”You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
Similar Messages
-
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
Unable to sync with MacBook Pro even after installing Po...
Unable to sync with MacBook Pro even after installing PocketMac
why don't you post the same thing again (since you posted it 3 times already)?
perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL -
Unable to generate form CSTFVTLC.fmx even after Patch 8528194
Hell EBS Gurus,
We have recently upgraded from 11i to 12.1.3 EBS and adadmin is failing on gerating form CSTFVTLC.fmx. I have followed Note 130686.1 and applied Patch 8528194 and a manual compilation:
frmcmp userid=apps/apps module=CSTFVTLC.fmb output_file=$AU_TOP/forms/US/CSTFVTLC.fmx module_type=form batch=no compile_all=special
or
$ORACLE_HOME/bin/frmcmp_batch.sh module=$AU_TOP/forms/US/CSTFVTLC.fmb userid=APPS/APPS@OFD1 output_file=$AU_TOP/forms/US/CSTFVTLC.fmx module_type=form batch=no compile_all=special
or
$ORACLE_HOME/bin/frmcmp.sh module=$AU_TOP/forms/US/CSTFVTLC.fmb userid=APPS/APPS@OFD1 output_file=$AU_TOP/forms/US/CSTFVTLC.fmx module_type=form batch=no compile_all=special
all still get the same error:
FRM-91500: Unable to start/complete the build.
I manually edited $TNS_ADMIN/tnsnames.ora adding:
OFD1=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ofindev03.macott.com)(PORT=1528))
(CONNECT_DATA=
(SERVICE_NAME=OFD1)
(INSTANCE_NAME=OFD1)
and then had a different error:
$ORACLE_HOME/bin/frmcmp.sh module=$AU_TOP/forms/US/CSTFVTLC.fmb userid=APPS/APPS@OFD1 output_file=$AU_TOP/forms/US/CSTFVTLC.fmx module_type=form batch=no compile_all=special
Errors:
Compiling KEY-NXTBLK trigger on MTL_MATERIAL_TXNS_VAL_QF data block...
Compilation error on KEY-NXTBLK trigger on MTL_MATERIAL_TXNS_VAL_QF data block:
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 3, column 1
bad bind variable 'parameter.G_query_find'
Compiling KEY-LISTVAL trigger on FROM_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on FROM_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling KEY-LISTVAL trigger on TO_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on ITEM item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on TRANSACTION_SOURCE_TYPE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on TRANSACTION_SOURCE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger on CLEAR item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger on FIND item in MTL_MATERIAL_TXNS_VAL_QF data block...
Compilation error on WHEN-BUTTON-PRESSED trigger on FIND item in MTL_MATERIAL_TXNS_VAL_QF data block:
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 4, column 1
bad bind variable 'parameter.G_query_find'
Compiling ON-POPULATE-DETAILS trigger on MTL_MATERIAL_TXNS_VAL_V data block...
No compilation errors.
Compiling ON-CHECK-DELETE-MASTER trigger on MTL_MATERIAL_TXNS_VAL_V data block...
Compilation error on ON-CHECK-DELETE-MASTER trigger on MTL_MATERIAL_TXNS_VAL_V data block:
PL/SQL ERROR 905 at line 10, column 19
object APPS.CST_LAYER_ACTUAL_COST_DTLS_V is invalid
PL/SQL ERROR 0 at line 10, column 5
SQL Statement ignored
Compiling PRE-QUERY trigger on MTL_MATERIAL_TXNS_VAL_V data block...
Compilation error on PRE-QUERY trigger on MTL_MATERIAL_TXNS_VAL_V data block:
PL/SQL ERROR 49 at line 1, column 4
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 4
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 10, column 10
bad bind variable 'parameter.g_query_find'
PL/SQL ERROR 49 at line 10, column 10
bad bind variable 'parameter.g_query_find'
Compiling QUERY_FIND trigger on MTL_MATERIAL_TXNS_VAL_V data block...
No compilation errors.
Compilation errors have occurred.
Form not created
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Has anyone encountered and resolved this problem?
thanks
MathiasHello Hussein,
I was focussing on an SR (3-6322036041) I opened on this but there has been no solution from that end.
When I executed
$ORACLE_HOME/bin/frmcmp_batch.sh
The complete error output is:
Compiling KEY-NXTBLK trigger on MTL_MATERIAL_TXNS_VAL_QF data block...
Compilation error on KEY-NXTBLK trigger on MTL_MATERIAL_TXNS_VAL_QF data block:
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 3, column 1
bad bind variable 'parameter.G_query_find'
Compiling KEY-LISTVAL trigger on FROM_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on FROM_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling KEY-LISTVAL trigger on TO_DATE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on ITEM item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on TRANSACTION_SOURCE_TYPE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-VALIDATE-ITEM trigger on TRANSACTION_SOURCE item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger on CLEAR item in MTL_MATERIAL_TXNS_VAL_QF data block...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger on FIND item in MTL_MATERIAL_TXNS_VAL_QF data block...
Compilation error on WHEN-BUTTON-PRESSED trigger on FIND item in MTL_MATERIAL_TXNS_VAL_QF data block:
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 1
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 4, column 1
bad bind variable 'parameter.G_query_find'
Compiling ON-POPULATE-DETAILS trigger on MTL_MATERIAL_TXNS_VAL_V data block...
No compilation errors.
Compiling ON-CHECK-DELETE-MASTER trigger on MTL_MATERIAL_TXNS_VAL_V data block...
No compilation errors.
Compiling PRE-QUERY trigger on MTL_MATERIAL_TXNS_VAL_V data block...
Compilation error on PRE-QUERY trigger on MTL_MATERIAL_TXNS_VAL_V data block:
PL/SQL ERROR 49 at line 1, column 4
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 1, column 4
bad bind variable 'parameter.G_query_find'
PL/SQL ERROR 49 at line 10, column 10
bad bind variable 'parameter.g_query_find'
PL/SQL ERROR 49 at line 10, column 10
bad bind variable 'parameter.g_query_find'
Compiling QUERY_FIND trigger on MTL_MATERIAL_TXNS_VAL_V data block...
No compilation errors.
Compilation errors have occurred.
Form not created
With this form not being created, there is also a bunch of about 45 views and 4 packages that are invalid.
I will apreciate anyhelp on this form.
Thanks
Mathias
Edited by: user558643 on Nov 27, 2012 8:24 AM -
Unable to print on hp 1320 even after installing upd
I am unable to print (even test pages) to my printer. I've tried installing the upd and after days of working on it, was finally able to print. But I'm finding that it won't print again today.
I also notice that there are 2 printers installed. One is called HP Universal Printing PCL5 and the other is hp Laserjet 1320 series UPD PCL5. I'm not sure which of the two printers I should focus on. I was able to get the latter to print but now am unable to get either to print. It is connected to a netgear router.
This question was solved.
View Solution.Hi,
Please follow the steps in the link below to solve the issue :
http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=410622&docId=emr_na-c00026681&docLocale=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
I initially thought that my laptop froze up, but this was not the case. I do not want to have to uninstall, I am in school and have a lot of bookmarks that are vital to my learning, to lose those would be detrimental to my education. Can anyone help with this malfunction?
Please update Firefox to 3.6.17 a.s.a.p. the reason being that there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/ -
I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Unable to print, pages not selected.
I have reader XI and I get an error message saying unable to print pages not selected. the only things on the forum have been they same error with reader 9. I have tried all of those fixes with no luck. I have to open Acrobat with the Internet to print with is frustrating as I work with a proprietary software program that most of my reports come up in acrobat.
Please help.Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum. -
I am unable to sync all my selected songs to my iphone. The error message is that the computer is not authorized. However, I have authorized the computer and iTunes confirms that. Any ideas what can be done to fix this. My phone is an iPhone 4S.
Were some of the songs purchased from a different itunes account?
-
In the LDB selection screen -Diff b/w Data selection / person selection
Hi Experts,
Want to know what is the difference between
Data Selection Period
Person Selection Period
in the other period , in the selection screen of the LDB PNP.
Thanx in Advance.
Regards,
IFFhi,
Please Refer to this link.
[abap hr question;
This will Help You.
Reward if helpful.
Regards
Sumit Agarwal -
LDB selection screen -Diff b/w Data selection / person selection period
Hi Experts,
Want to know what is the difference between
Data Selection Period
Person Selection Period
in the other period , in the selection screen of the LDB PNP.
Thanx in Advance.
Regards,
IFFhi,
Plz follow this link.
Re: Data selection period & Person selection period
This will Help.
Regards
Sumit Agrwal -
Hi All, difference btwen data selection and person selection period in ldb
Hi All, difference btwen data selection and person selection period in ldb -pnp
If possible provide with an example .Its Urgent pls.Hi,
Difference:--
Data Selection Period
The data selection period enables you to specify the period in which employee data records are read. Only records which overlap with the specified period by at least one day are selected. To define an interval, enter the start date in the left column and the end date in the right column
Person Selection Period
When you enter a person selection period, the system selects only those employees who are members of the enterprise on at least one day in the specified period. These are persons with a valid Organizational Assignment (0001) record. Entries in the standard selection options fields limit the personnel numbers that are selected. You can specify an interval by entering the start and end dates in the left and right columns respectively.
Selection criteria in PNP are just used to determine the pernrs which meet them. For these pernrs then all wanted data is selected. This data then is not checked against this criterias.
An Example:
Pernr 4711 has benn assigned to costcenter 10 from 01.01.2004 until 31.12.2004. On 01.01.2005 costcenter changes to 20.
If you now select all employees with costcenter 10 and list their costcenters, you will get both costcenters 10 and 20.
Most reports which use PNP have to sets of date-ranges:
- Person selection period that controls selection of pernr.
- Other period that controls selection of data.
If you set person selection period in above example to 01.01.2004 and other period to 01.01.2005 and select costcenter 10 you will in fact get employee 4711 with costcenter 20 shown.
Same effect with org-unit or any other selection criteria.
Regards
Vasu -
Data selection and Person selection
Hi all,
What is the difference between 'Data selection' and 'Person selection' in PNP screen.(PNP logical database)
I searched so many . But couldn't find appropriate one. Still confusing.
Can any one explain me with example?
must use both at a time or any one selection is enough?
Which situation use 'Data selection' and which situation use 'Person selection' ?
Thanks in advance.thanks for all reply.
I have one pernr 700098
Hiring date : 01.01.2008 - 16.08.2008
firing date : 17.08.2008 - 31.12.9999
I developed a customized report using PNP LDB.
If , I entered 01.01.2008 - 31.12.2008 in 'Data selection'
3 in employee status( active)
or
I entered 01.01.2008 - 31.12.2008 in 'Person selection'
3 in employee status( active)
If , I entered 01.01.2008 - 31.12.2008 in 'Data selection'
0 in employee status( active)
or
I entered 01.01.2008 - 31.12.2008 in 'Person selection'
0 in employee status( active).
In above all cases picking the same record. what is the use of PNP screen?
after 'GET PERNR' pernr structure get the value of latest record from infotype P0000.ie firing record. Because it doesn't bother the status.
For below case picking the proper one.
If , I entered 01.01.2008 - 16.08.2008 in 'Data selection'
3 in employee status( active)
or
I entered 01.01.2008 - 16.08.2008 in 'Person selection'
3 in employee status( active)
If , I entered 17.08.2008 - 31.12.2008in 'Data selection'
0 in employee status( active)
or
I entered 17.08.2008 - 31.12.2008 in 'Person selection'
0 in employee status( active).
Plz any one clear me.
Thanks. -
Insbridge--Rate Manager--Unable to locate output schema selection.
hi, im getting the following error while testing / executing a rating or underwriting program
Rating Error
Unable to locate output schema selection.
Rating Summary
ID Values
Program Name Program not found!
Parent ID 1020
Line Of Business 3
Program ID 1
Program Version 1
Rate Status
Package Date Program Location Error
Rate Location system8-pc
Rate Environment rm
From Cache False
Running Time 0.454 seconds
how do i solve this ?
Edited by: user11436116 on Sep 29, 2010 2:11 AMSounds like your rate request XML does not match the schema required to obtain a rate, or the information in the rate request XML does not match up to a published rating program.
-
Advanced Benefits : How to use Person Selection Rule?
Hi,
For processing Open Enrollment we need to run"Participation Process:Scheduled" Concurrent Program for a set of 300 employees.How to create a person Selection Rule for this?
thanks.Okie.....then lets do this..
FORMULA TEXT:
/*=========== DATABASE ITEM DEFAULTS BEGIN =====================*/
/*=========== DATABASE ITEM DEFAULTS ENDS======================*/
/*============ INPUT VALUES DEFAULT BEGIN ======================*/
/*============== INPUT VALUES DEFAUT ENDS ======================*/
/*================= INPUTS SECTION BEGIN ========================*/
/*================== INPUTS SECTION ENDS ========================*/
/*================ FORMULA SECTION BEGIN =======================*/
l_ret = PER_SELECTION_FUN ( hard code all your employee number here like '938114' )
return l_ret
Function will be -
CREATE OR REPLACE FUNCTION test_load_runner (p_employee_number IN NUMBER)
RETURN VARCHAR2
IS
BEGIN
RETURN 'Y';
END;
Lets try this and let me know if this does not resolve ur issue.
Gaurav
Maybe you are looking for
-
Hello all, I have a question about after insert trigger. Will be new row inserted and commited if after insert trigger returns error? Thank you. regards, Miha
-
Hi all, I added new fields by using 'EEWB' for BP. i have assiged fields to sections also. but my problem in every BP type showing 'Custom fields TAB' i want to remove this Tab. i know Bupt also where i want to do i don't know pls tell me where i
-
Hi I have a web application which would enable users to see a list of PDF document on the web page and when the user select the PDF document, it will be open by a adobe PDF viewer. Within the content of the PDF document, it will contact URL links to
-
SAP Guru's- With the absence of BW and ABAP for customized reports, does SAP have standard reports I can use for A/R Ageing? Specifically, are there any t-codes I can use to populate reports of A/R and input queiries or parameters? POINTS PROMISED
-
I want to upgrade but want to know that I will be getting many of the features that I am expecting to. As of right now, running Snow Leopard, I only have 2 finger scrolling via trackpad. I have a magic mouse, but was wondering if the upgrade to Lion