I am using a Pro 100 printer. I am on a Mac using Adobe Illustrator and printing on A-2 paper.

Hi Guys -
I am trying to print on A-2 paper which is 5.5" x 8.5". On a Pro-100
I would like to print my image without any boarders - "edge to edge".
I am using a Mac and I am using Adobe Illustrator CC
It seems that my margins in the pre-set are off  - the preview shows what I am printing, which looks correct - but when it prints the left side is getting cut off. Very strange.I re-set the margines to 0.3 but that gives me a boarder. I tried changing the paper type to boarderless - which changed everything.
Any adivice would be great.
Thanks!
Mario -

If you installed the Seagate software, remove it according to the manufacturer's instructions.

Similar Messages

  • Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing

    Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing functions will not be availableuntil you have selected a printerm and reopened any documants.

    Your printer driver is having problems.
    Resetting Photoshop's preferences sometimes clears it up (by removing previous print settings that the driver is supposed to read, but sometimes fails at).
    Otherwise you'll have to work with Canon to figure out why the driver is misbehaving.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • My Mac desktop went offline and printer stopped working

    My Mac desktop went offline and printer stopped working.  I have attempted everything I can do, without luck. When I attempt to reset my belkin router, the mac will not accept my password. My PC, set up 3" away, is online. HELP

    It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Hi, I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

    I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

  • Recommended hardware configuration when using Adobe Illustrator and Photoshop

    Hello!
    I am an Illustrator who uses Adobe Illustrator and Photoshop most of the time. Today I am using Adobe CS5.5 suite and is thinking of getting the Adobe CC. As my computer today is abit old and "tired", I am unsure about what to focus on when updating my hardware?
    I am using today a HP workstation with following hardware:
    Software:
    Windows 7
    Adobe Creative Suite CS5.5
    Hardware:
    Processor:              Intel i7-2600 3,4GHz
    Internal memory:     8,00 GB DDR3
    Disc drive:               500GB SATA disk 7200rpm
    Graphics card:        NVIDIA GeForce GT 1GB
    Since I work both with Technical Illustrations with loads of anchor points in Adobe Illustrator, I get sometimes error messages like "Out of memory" and such. I read about having two discs, one system disc and one work folder disc, that would solve that problem. But I am also working alot with large illustrations for comercial and advertising situations and I feel that it tend to get a bit slow, especially when I add gradients and blendmodes to an illustration.
    So If I could get som recomendations of what to focus on to boots the speed in my system, also taking into account that my budget is somewhat small, I would really appreciate it!
    Best regards
    Ulf

    I have similar setup to yours.
    From my point of view you need more RAM. I have 16GB. Than you will need to change in preferences to adjust memory used by PS and Illustrator. Maybe take a look at virtual memory in Windows and disable aero effects.
    Disk. It is better to have one disk for system (eg.SSD) and one for documents. But don't buy something like WD Green series that is intended for backup.
    Graphics. It is not a major player I think for your tasks, but OpenGl can speed up rendering in Photoshop and Illustrator.
    When exporting AI with layers to PSD it will always show "out of memory" unless you turn off anti aliasing.
    and the most important thing reinstall Windows after some time... It will work faster.

  • When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its

    When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its acrobat.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • I tried to open my adobe illustrator and this window popped up saying my trial had ended. i was not using a trial version, i have been paying monthly. so i went into my account online and my account still reads that my plan is active and will be until Mar

    i tried to open my adobe illustrator and this window popped up saying my trial had ended. i was not using a trial version, i have been paying monthly. so i went into my account online and my account still reads that my plan is active and will be until March 11, 2015. can you please tell me what the issue is and what i need to do to fix the problem.

    The CC purchased in March 2014 is active & working. Please follow :
    Creative Cloud products revert to trial after upgrading to Mac OS X 10.7.4 | CCM
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    In case the issue is still unresolved, you can use the Contact Support link in the above links.
    Regards
    Rajshree

  • I want to know if it is legal and acceptable for me to buy the Individual version of Adobe Illustrator and use it for commercial purposes

    Good day, I'm looking to buy the latest Adobe Illustrator. I am an individual / freelancer and I work from a home office. I am based in South Africa. I want to know if it is legal and acceptable for me to buy the Individual version of Adobe Illustrator and sell the illustrations / vectors etc I produce on sites such as RedBubble etc. In other words to use the Individual version as a freelancer for commercial purposes.
    Also why the price difference between the Annual Plan, paid monthly and the Monthly Plan?
    And once I have paid for a year, with whichever plan, is there a continued annual subscription due or am I done paying after a year?

    wendy
    It is perfectly fine to sell what you create with all versions of Illustrator, even the educational one.
    The price difference is because if you commit for a full year you get a better price - kind of like a volume discount.
    If you subscribe, you will have to continue paying each month if you want to continue to use the software. It's a subscription, so you'll need to pay for as long as you want to keep using the software.

  • Using Pixma Pro 100, can I print twice to a sheet of Luster Pro?

    I have some early prints where I mis-sized the image and ended up with a lot of extra white left over. Can I run it through again and print to the unprinted areas?
    Solved!
    Go to Solution.

    "Can I run it through again and print to the unprinted areas?"
    Yes you can I do it all the time.  But ONLY after the print has completely dried.  I mean DRY!  Several hours is required.  If you get ink all over the printer's rollers and/or paper path, you will not be a happy person.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • Can I use Acrobat 11to download pdf that only allows me to read, enter data, and print?

    I need to complete gov. forms available online as pdf.  I can review, enter data and print, but I cannot save to my computer or anywhere else.  I need to be able to save so I can return to the form and enter information as I access it.  Can this be done if I purchase Acrobat 11 and, if so, can I get the Standard edition?  I currently only have Reader.

    Yes, if you upgrade to at least Acrobat Standard you will be able to save. Since you can't save with Reader (assuming 11), the forms are probably XFA forms (created with LiveCycle Designer), which must be Reader-enabled in order to be saved with Reader. Reader 11 can save non-enabled AcroForms (forms created with Acrobat), but not non-enabled XFA forms. If you have a Reader version prior to 11, try using Reader 11 to see if it will save.
    If you can provide a link to one of the forms, I can tell you for sure what the minimum requirement for saving is.

  • How do i print a document from a mac to a dell 5100cn printer wirelessly

    Having a problem printing wirelessly from a macbook pro to a Dell 5100cn printer.  I have entered the IP address for the printer on the mac and it appears that the printer did receive the command from the Mac but it says that it is printing and a message is also saying it will retry in 25 seconds but nothing happens.
    Any input will be much apprciated.
    Charles Saliba

    Care to share which OS you are using?  If ML....
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
    =======================
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    What to do when you can't print
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    Contact Dell tech support and/or read the printer user manual!  Especially the troubleshooting section.

  • I downloaded the trial versus of Adobe Illustrator to print clip art to my Graphtec CE 5000 vinyl plotter, the image goes to my paper printer instead, my question is how I set the illustrator to print to my vinyl cutter?

    How do I connect the trial version of Adobe Illustrator to my Graphtec CE 5000 vinyl plotter?  When I go to print the image goes to my paper printer, any help will be appreciative

    Yes, I have been using the software that came with this printer and has been working great for 2 years however I couldn't print clip art, I asked the place that sold the plotter to me and they said with the software that came with the printer I could not print clip art and I had to formal an illustrator and recommended Adobe
    Sent from my iPhone

  • Printing on Network with C4780, Mac OS 10.6.7 Prints eventually but may take 30 min to complete.

    I am using am apple router. If I connect the printer via USB it prints fast. On a network connection the printer stops repeatedly depending on the information to be printed. A simple paragraph with 4 or 5 lines is slow but reasonable.

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 10.0.1.2 to .200.  Let's select 10.0.1.220 for your printer.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Unable to see Bursting Control file in Data definition

    I have installed the Patch 5968876. But I still dont see the upload Bursting Control File" Button . I see the new concurrent program XML Publisher Report Bursting Program being added, however Data definition screen is unchanged . Can someone pl advis

  • MySQL 4 Connection not quite working

    I am attempting a db connection to MySQL vsn. 4.0.12 from JDeveloper. It works in that the connection wizard test says 'success' and I can open the connection. However when open I can not see any tables in the JDeveloper tree. It does seem to indicat

  • Images as sharepoints?

    hello, we have the problem, that our colleagues always put stuff on our xserve raid 1TB until it is almost full. we searched for solutions to give specific groups a quota on the server, but there are no solutions, only for all users, but not for grou

  • Unable to launch Photoshop Elements 11 Editor

    I have successfully downloaded Photoshop Elements 11 and Premiere Elements 11. Both work fine. All that's missing is the Editor for Photoshop Elements 11. How do I re-install the software in order to get this obviously vital component? Message title

  • Too hot to use

    Hello Gang, For the last two weeks or so my MacBook Pro has become too hot to use. The bottom is so hot that I can not longer use it in my lap and the top, especially the left side gets so hot that I must stop typing. Also, the fans run continually.