I am using Firefox 3.3.23 which works fine for me. Whenever I try a newer version, I find that I can read my email, but I am not allowed to send email messages. Is there a fix for this problem so I can switch to the latest version of Firefox??
I am using a web-based email system maintained by my university, not gmail or yahoo or outlook.
Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22
Similar Messages
-
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?
Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on? -
Is there a reason that I can't download the latest update for my iPhone 4? It downloads halfway and then stops.
Have you ever jailbroken your iPhone with tether? Because if you have the jailbreak keeps a file on your phone making it so you can't update. To solve this problem your going to have to reset your phone.
-
Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???
Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....
-
I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?
see if this article helps: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook
-
My flash drive which worked fine for 2 years crashed
I have a 32G flash drive which worked fine for 2 years. Then the Disk Utility says it needs repairing but the repair command is disabled.
So I transferred the entire content of the drive to another drive .
Now I want to reformat the drive that needed repair and hopefully save keep it as a spare drive. Somehow I don't know how to format it and I'm too lazy to drag up my PC and do it there.
How do I format it straight from my Macbook Air.
Thanks
Sil...cluelessThe following previous discussion covers it and some of the options: How do I format a USB stick on my iMac
-
My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!
I have just found the problem to be windows firewall on my library PC
I can only presume there has been an update to windows firewall or iTunes
all the relevant programs were on the allowed list
I'm now currently running with firewall turned off on my library PC.
I'll update when i have found the rogue setting. -
Most of the question is in the discussion header. I have a Tango TRX bluetooth speaker that worked fine for three weeks with my third generation iPad. I started having trouble connecting and recieved the "not supported by iPad" message. It connects just fine until I open any app that requires sound and at thet point I recieve the message and the device disconnects. The Tango still pairs flawlessly with my laptop which is not an Apple product. How could a product suddenly become unsupported?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer. -
Light Room 4 does not recognize my Raw Images (NEF) for my Nikon D810. How do I correct this issue so that I can import NEF files into lightroom 4
The D810 requires Lightroom 5.6 or newer. There is no way to import the NEF files into Lightroom 4. You can download the latest DNG converter and use it to create DNG copies that can be opened with Lightroom 4. Or, you can upgrade to Lightroom 5.
-
3G isnt working and I cannot receive or send picture messages...Anyone else having this problem?
When I try to connect to the web on my Droid 2 it says its not connected and there is no 3G symbol at the top of my phone. I also cannot receive or send picture messages from my phone...Is anyone else having this problem or knows how to fix this?
I do apologize about the issues you are experiencing with your device and I will be more than happy to assist you with resolving those issues. First step will will take in resolve the issues will be by updating your device.
On your phone, dial *228
Select option 2 when prompted
Listen to be advised that the update was successful
The device will power off and on (if this is not completed automatically, complete is manually)
Once the device is power back, go ahead and check to see if you are able to send and receive picture messages and that your 3G is working properly. If not, here is a link to additional troubleshooting information:
http://support.vzw.com/clc/faqs/Equipment/faq_troubleshooting.html?grp=3&faq=3 -
Does the hdmi adaptor which works with ipad 2 work through the 30 pin adaptor to lightening? I keep getting that it doesn't recognize the device
It works fine on my ipad2It will not work with the 30-pin to Lightning adapter. See footnote 3 in:
<http://support.apple.com/kb/HT4108>
You need the Lightning Digital AV Adapter for the iPad Mini.
<http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter> -
Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older. I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system. Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email: [email protected] or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
Can Microsoft Please fix this problem! We cannot update to the latest Build!
Microsoft,
We are still stuck at build number 9841.
We cannot update to the latest release build number to do beta testing!
It's been so dead frustrating!
What are you guys been doing?
Can you please fix the problem!I have downloaded the latest build 9879, I format my hard disk and reinstall the OS with the latest build.
Right after installation, I did a check via the preview build just to make sure I did not get the same error again.
And guess what, I still get the same error again.This is impossible. It should not have that same error again while checking for a new preview build updates!
See the screen shot, see at the watermark build number at the right hand bottom corner.
So what could be the problem then?
Your screen shot shows you are running the latest build, 9879, therefore you will not see a new preview build when checking. I agree that the wording in the message could be better however.
Maybe you are looking for
-
DS 5.2.4 Upgrade Issue - Unable to login to console
Hello! I have not been able to login to DS console after I have patched it to 5.2.4. I have found another thread with the same issue with solution https://forums.oracle.com/forums/thread.jspa?messageID=8517561 (add ldap library into runtime linking e
-
Believe Acrobat Pro XI (cc) has bug - need to uninstall immediately
Under deadline - working on Saturday. installed Acrobat Pro XI update Wed. or Thurs. on Friday noticed when I print PDF'd documents containing Calibri font to PCL printer multiple random parts of the text are MISSING. This happens both when I create
-
When I log in and click on my user name, my name is displayed as my handle. If I click 'Edit your profile' I am told that my email address is my handle. If I hide my name from posts, I am given a number as my handle, but when I preview a post my emai
-
IWeb-created RSS Feed - How to Modify keywords?
I have a podcast with 2 episodes that have been approved by iTunes, but they are still not showing up in a Search. I keep reading about people entering keywords into their RSS feed to help .... but how do I do that? Remember I'm using iWeb. Thanks.
-
AW client configuration updates
Hi, Any updates done from AW client (configuration manager) will be updated in Logger database. Right.? So is there a way to backup the configuration data before user make any configuration changes.? So that we can backup the configuration data and r