I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes a

I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes ages. Any help out there?

I believe there are a couple of similar threads about CC or CC2014 behaving this way that might give yo some hints, but CS5 is not supported on your OS and may not run properly regardless of what you do. An in-place OS upgrade or an attempt to migrate the application would both be major problems for ID, so if you did either of those things you'll want to uninstall, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall.

Similar Messages

  • HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

    My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

    Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
    http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
    Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
    Don't use wi-fi wireless for Mountain Lion recovery.

  • Project can be shared because it is refrencing media on the camera, but i have imported all the footage. what do i do?

    i have imported my videos and edited it. now i am trying to export the file but it says it can be shared because it is refrencing material on the camera. i have tried importing it again and nothing works. help me please!!!!!

    Go to your event folder and open the orginal media folder and post a screen shot of the open folder and its files.
    Russ

  • I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    Hi
    That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
    Remove all your tabs and set the text in justified paragraphs.
    I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
    Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
    The text will jump into place the way you want it to.
    Hope that helps
    Paul
    PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
    after you've set it will be LOADS easier this way.
    You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

  • TA44475 I have just bought a new macbook and trying to add all my music to my new itunes from a previous version of itunes (iTunes 9) in my seven year old Mac. I can import all the MP3 songs but iTunes ignores all the m4a format files. What to do?

    I have just bought a new macbook and trying to add all my music to my new itunes from a previous version of itunes (iTunes 9) in my seven year old Mac. I can import all the MP3 songs but iTunes ignores all the m4a format files. What to do? I have copied them into the music file along with the mp3 files but they still dont open in iTunes.

    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    Also... have a look at these 2 Videos...
    http://macmost.com/moving-your-itunes-library.html
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • I did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    You downloaded Adobe... what? Adobe has tons of applications.
    Which Adobe product did you download?
    Clinton

  • I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

    I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

    Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

  • Interactive pdf using Indesign CS5.5 problem with layering

    Hi all
    I have designed an interactive pdf - not for the web. I have a problem layering out a page. On the page there are 6 buttons. Each button when pressed will bring forward a box containing content/information. When I designed the page using indesign cs5.5 I made sure the largest box of information was at the top of the layer. I thought this would be the cleanest way to present the page. By having the largest content box (each of the six content boxes are different sizes) at the top it would cover the other boxes. When I exported the file out the smallest box was at the top, then the secondest etc. It looks pretty messy.
    Is there a way to ensure that the lagest content box is at the top when it exported to pdf????
    Regards

    Have patience!
    Have you tried putting that largest box on it's own layer at the top?  I don't know much about buttons etc though, if you wait someone will come on here that does.  A lot of contributors are in different time zones though.....

  • I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know

    I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know !

    In a PDF you can´t change single letter.
    You can only try to convert the PDF document into a Word document.
    Now you can search and replace a letter.

  • I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced.  I just want regular jpg with a high resolution.  What am I doing wrong, never had this problem

    I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced.  I just want regular jpg with a high resolution.  What am I doing wrong?  , never had this problem before.  Help!!! 

    Your description of the issue is not clear:
    What format, bit depth and color was your original file "from the net"?  It sounds like it was a Color Indexed GIF, which would cause what you are describing.
    In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
    If the image is a 256-color GIF, remember the rule:  GIGO = garbage in, garbage out.

  • I need a help to use InDesign CS5 without problems every 30 days.

    30 days is the time limit that i have to use InDesign CS5, i want to use that forever without pay for, it's possible? Please help me.

    Has to be.
    And we don't help people who want to use programs without paying when the trial is over.

  • Greetings. I have finalized an Arabic Language brochure using indesign CS5.5. Once I opened it in CC 2014, I found Axtmanalblack font look like vertical rectangles crossed. Any suggestions?

    Greetings Dears.
    I have finalized an Arabic Language brochure using indesign CS5.5.
    Once I opened it in CC 2014,
    I found Axtmanalblack font look like vertical rectangles crossed. Any suggestions?
    Thanks.
    Tariq

    AXT fonts don't work well in new versions of InDesign. Your best bet would be to replace the font with a Unicode compliant OpenType font. I believe there are a few Arabic fonts that are included with InDesign that would work.

  • Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.

    Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
    Thank you for your help.
    Walter

    Thank you very much for your help. Now, I was able to install the update (Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5, Mac). But I couldn’t mark the answer as correct. I didn’t find the „correct“ button.   
    Kind regards
    Walter
    Am 25.12.2014 um 16:06 schrieb station_two:
    Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
    created by station_two in Photoshop General Discussion - View the full discussion
    OK, here's the Windows version of the update:
    Adobe - Photoshop : For Windows : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
    and for Mac:
    Adobe - Photoshop : For Macintosh : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
    Of course, ignore the idiotic recommendation that appears there to try to use Help > Updates.  We already know that doesn't work.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043416#7043416 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043416#7043416
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Is it possible to install/use InDesign CS5 with an InDesign CC subscription?

    I need to use InDesign CS5. From the trial, I'm taken to a purchase page where the only option is to buy the CC subscription. After removing the trial and running the CS cleaner to get rid of everything and running the CC installer, it downloads InDesign CS6.

    We have built an InDesign plugin that need to be tested against CS5.
    If it's impossible to use CS5 with a CC account, why is that the only option you're given when you click 'Buy Now' in CS5?

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Maybe you are looking for