I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?
I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>
http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps
Similar Messages
-
List of transactions executed in the last one year along with the count
Hi all,
I want to find the list of transactions executed in the last one year in my IDES system. Also, i want to find how many times these transactions got executed in the last one year.
I already saw, ST03 and ST03N tcodes. But im not able to see the correct result there.
Could anyone tell me whether SM21 or ST03N tcode will be useful for finding the total number of transactions get executed in the last one year and the number of times these got executed..
If anyone of this useful for my exact requirement, then what are all the correct inputs need to be passed to these transaction?
When i see the MONI table, i find that it gets stored with some cluster key. How the data from this table will be usefiul for my requirement?
Or, is there any standard reports available for finding this count?
Thanks,
ShanthiHi Michael,
Thanks for ur reply.
I have few more clarifications in this.
When i click the "Standard" transaction profile, it shows a list of dialog pgms and the number of steps. But this count is different from the count which i get it from "Early Watch".
For example, the "Standard" didn't display the SE38 transaction code for a specific week which i selected. Whereas, "Early watch" displays the SE38 transaction.
So, which count is correct actually?. What do "standard" and "Early watch" represent?
Also, i executed a Z transaction today(13.03.2009). But im not able to select today (No application server is avaliable to select for today's date). So how can i check what are all the transactions executed today and how many times this Z transaction executed today, from this transaction.
Please help me...
Thanks,
Shanthi -
Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answerCould not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium -
I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
I am from Pakistan.The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
Activation issues are generally the result of the device being hacked or jailbroken. -
I live in Turkey and my father is bying me a Macbook pro from Dubai's airport, and I was wondering if I would still have the same "one year limited warranty" as if I bought it from an apple store in Turkey, and is the one year limited warranty international or not?
So can I return, replace or repaire the laptop in TurkeyIf the seller is an Authorized Apple Service Provider, then yes. Otherwise I do not know.
I do not see Dubai listed:
https://locate.apple.com/country
The Apple warranty is world wide.
Ciao. -
Over the past couple of months, my iPhone 3GS has had dead spots on the left side of the screen, preventing me from using the r, d and x keys, the number 4 and the semi colon and comma keys. Does anybody have any ideas on why this has happened or any ideas that I'll be able to fix this problem?
Just a note; I can't put my phone to sleep or turn off as my lock button isn't working, so I'm using the AssistiveTouch settings.
Thanks.hannahhfoskett wrote:
I would gladly upgrade to the next model if my contract was due!
This has no impact on the ability to purchase a new iPhone... it simply means that the newer one will not be at a fully subsidized price.
You could always take it to Apple and do an Out of Warranty exchange (I'm assuming the device is out of warranty) for $149 US. -
My Battery will not charge battery is at 4% now since I've purchased the new battery, When the adapter is plugged in it does not charge with the adapter or the AC cord. Any ideas what could be the problem, will I have to replace the adapter?
Model Name: MacBook
Processor Speed: 2.4 GHz
Battery Information:
Model Information:
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0000
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 217
Fully charged: No
Charging: No
Full charge capacity (mAh): 4947
Health Information:
Cycle count: 5
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 10376
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: NoOpen SystemInformation (in Utilities), click 'Power' in the left Navigation panel, then at the right make a screenshot of the whole part called 'Battery Information:' and post it here, please.
I would avoid the use of DiskWarrior, at least for now.
You may also start DiskUtility and do the 'verify disk', the message at the end of the verify should end with the word 'OK'. -
An erroe happened when i open my itunes , error -42032,my ipod wasn't connect to my pc at that point, the results is that i can't add songs and movies that i'm buying or had already bought in my ipod because it says that my pc isn't authorized to do it. the point is that i'm using this pc for the last 3 years with my itunes and ipod
check out this support article.
-
To display the WBS elements for last one year
Hi All,
Im displaying the details of all active employees. I need to display the WBS elements of all active employees for the last one year alone. Can anybody help me out to get this...
Regards,
SuryaHi,
select all the PERNRs with
BEGDA and ENDA as per ur req
to check if they are active or not
use the FM
HR_BEN_US_CHK_TERMINATION
then take all the active PERNRs and use
them to query PRPS table with
OBJNR = activePERNR -
I have a date field (upd_date) in my table (table1) and i need to retrieve the count of the records which contains the last one years's data alone.. Using the upd_date field as reference.
Thanks...user10871298 wrote:
I have a date field (upd_date) in my table (table1) and i need to retrieve the count of the records which contains the last one years's data alone.. Using the upd_date field as reference.
Thanks...So whats the problem in that?
You can just
select count(*)
from table1
where upd_date between to_date('01-01-2009','dd-mm-rrrr') and to_date('31-12-2009','dd-mm-rrrr')Or if you dont want to make the date static you can
select count(*)
from table1
where upd_date between add_months(trunc(sysdate,'year'),-12) and trunc(sysdate,'year')-1Edited by: Karthick_Arp on Mar 22, 2010 10:57 PM -
Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn’t work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?
Did you recently updated to 7.0.4? Even for me same also issues.
-
I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.
Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up.......... -
I can open all my docs in Pages except the last one I was working on. Does anyone know what might be the problem?
The document might be corrupt. If you worked on this particular document at all in the iWorks in iCloud.com beta, that may have caused a problem. If you don't know what I'm talking about, you can rule that out as a possibility.
In any event, you could try opening the documents in iCloud.com using your computer, and see if you can download it to the computer, edit it there and then upload it again. -
how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?
Hi john,
Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
Cheers,
GB -
I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?
Download a free app and try again, you can delete the free app afterward.
Maybe you are looking for
-
is it possible to add the nvidia quadro fx5500 card to the mac pro instead of the fx4500? and another question : is it possible to connect a m-audio card to a creative soundspeakersystem?it's just because i want to have 7.1 instead of 5.1 to edit in
-
Is it possible to do goods movement with reference to PR or STR?
My client wish to follow following process for fulfilling the material requirement. 1. User will create Purchase Requisition or stock transport requisition. 2. Purchase dept. will check the stock and will ask stores to issue the goods if available. T
-
How can I set my date and time to ebay network time server?
In the system preferences I would like to set the date and time to ebay UK time? I thought a quick google would be bring up the server and I can't find it. At the bottom of every ebay page there is a link to official ebay time But its not a live feed
-
Making filter setting changes propagate throughout my project?
I'm using FCPro 4.5. Say I want to apply a particular color correction setting to a bunch of clips in my project's timeline. What I've done is I've saved off an instance of the 3-way filter with the settings I like into my favorites folder, and I've
-
Is there an update for safari compatible with Maverick
I have just downloaded Mavericks but it seems to be incompatiblewith Safari?