I am using Logic Pro 8, I interface with a firepod, got a new firestudio project, but I can only access 10 tracks at a time to record enable, anyone?

I know the two interfaces have synced, but I just can't seem to pull up more than 10 tracks in the input channel drop down. If any one has any idea , I would love to hear about it.

CCTM, Hello my friend, I wanted to thank you for your support with this issue, Your screen shots, and the tricks and tips book I have helped me set up the aggregate device, I now have 20 inputs and 20 outputs as it should be.
Thank you again, respectfully Eric King.
P.S. As I work my way through the two Logic Pro 8 series books from apple, I am sure I will have more questions, hope to speak with you again. Have a wonderful day .

Similar Messages

  • Logic Pro X Trouble Interfacing with M-Audio Axiom 49

    The Axiom 49 shows up in the track listing and visually indicates a signal, but does not make sound. I was, however, able to get the Axiom to make sound in Ableton Live.
    Most significantly perhaps, the 'Instrument' button on the Axiom does not light up.
    I have had two different audio engineers look at this problem and both were baffled.
    Any suggestions?
    Thanks!

    I will never spend another nickel on either M-Audio or anything from Avid. Their level of disdain for their customers who pay good money for their gear is unconscionable. Maybe I've been spoiled by Apple and other vendors. The Axiom Pro was not cheap and for them to abandon its support so quickly is like a slap in the face.
    In short, I am with you, Fibrechannel. I have to write-off M-Audio on the basis of the old adage... "Fool me once, shame on you. Fool me twice, shame on me."
    Frustrating beyond reason.

  • Can I use Logic Pro 9 Sound Libraries with LPX or do I need to download them all anew?

    I have LP9 installed on my system. Does LPX use the same sound files, or must I download them all again?

    Yes you can - maybe.
    These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You may need to contact Apple Legal:
    http://www.apple.com/legal

  • Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

    hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

    Friedrich sp wrote:
    Can you send me a mixer wich can do that, please ?
    Who do you think I am? Santa Claus?
    What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
    Roland UA 1010
    Focusrite Scarlett 18i8
    However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
    The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

  • Using Logic Pro with Reason 3.0

    I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
    When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
    From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
    I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
    Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
    Thanks in Advance.
    amerretz

    Common problem. LP doesn't rewire 'out of the box'.
    There are two ways to do this (well, more, but I'll tell you 2)
    1 (Easy Way):
    Restart Mac (Just to be sure things are sorted, not everytime)
    Launch Logic
    Launch Reason
    Arrange Window
    Choose a Channel> Pan Left
    Go to the Middle section of the Parameters on the Left
    With the Channel pop up menu, select Rewire> RWMix L
    Repeat for the Right and away you go.
    2 (More Advanced)
    Environment Window
    In the Middle section of the parameters on the Left select Create
    Name it Rewire
    Under that windows "New" pull down (Top Left), pull down to Audio Object
    In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
    Double Click the Audio Object to expand it
    Pan Left or right, or whatever you need.
    Rename if you wish
    Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
    Go to the Mixer window
    Double click the Bus you assigned, this puts it in the arrange window
    Arrange window
    Name the Bus "Rewire" or "ReDrum" or something great like that.
    Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

  • Quisiera saber si se puede utilizar Logic Pro con la interface Focusrite Saffire PRO 26

    Quiero comprar una interface Focusrite Saffire PRO 26. Quisiera saber si es compatible con Logic PRO X
    Gracias

    About a year ago I got a Mac pro with this reference, from an advertising agency. It was a series of computers that [they] were going to throw out, and a fellow already offered him one. From what I've read is the year 2006/2008.
    The issue is that I have tried switching connecting to a screen but I do not get anything out. The furthest I've gotten has been to see me for a password that I have not connecting to my Mac Book Pro with a FireWire cable (my partner is no longer in the company and do not know the password but I read that you can reset all that).
    I wonder if it's worth it to fix it or take it to look at it because if you could update it would be great to install Logic Pro to produce music.
    looking forward a reply.
    many Thanks
    That SMC number is for the original Mac Pro 1,1 from 2006. It is worth about US$600 in working condition. Its technical Specs are here:
    http://support.apple.com/kb/SP30
    If you hear the chime, that means it passed its Power-On Self Test, and it is working, but it could need a new Hard Drive.
    It shipped with a 7300 graphics card, and many of those are dead by now. To use it, you would need to buy an Apple-firmware 5770 card, about US$250.
    That machine can run Mac OS X 10.6 or 10.7, but not higher.

  • I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    I
    got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
    Thank you for your help, Frank!
    To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
    Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
    Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
    Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
    regards

  • Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

    Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

    For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence  and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
    Have a nice day

  • Can I use Logic Pro 9.1.6 on two computers with one licens

    I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

    Hi, is  the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
    If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • "Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    Yes. Click here for more information.
    (40435)

  • I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

    Hi
    rmarlia wrote:
    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
    Armadillosound wrote:
    To create a fade out press T to open the tool menu and select the fade tool.
    Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
    Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
    https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
    CCT

  • How to create chord charts from midi using logic pro x

    How to create chord charts from midi using logic pro x

    Depending on what you mean by Chord charts (Tabs?)
    Use the Score.......
    http://help.apple.com/logicpro/mac/10/#lgcpf755d649

  • HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

    HI. ...
    Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
    I have heard rumours in the past is that all sorted now?

    At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

Maybe you are looking for