I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT

Similar Messages

  • Rent a movie and do not know how to start it .. there is no button that says rent .... or see.  Since the beginning?

    It's so simple to rent a movie ... but not to be downloaded and not as log ... should be very simple.
    1 Video rented .... click .... and Begin!

    Hi Warnsix,
    If you have questions about how to rent or play a movie through iTunes, you may find the following article helpful:
    Apple Support: How to rent a movie from the iTunes Store on your computer
    http://support.apple.com/kb/ht1390
    Cheers,
    - Brenden

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • Vixia HF R400 and do not know how to get it to burn to a cd. Help!

    I have a Vixia HF R400 and do not know how to get it to burn to a cd, windows movie maker works, but it only has one 'chapter' so the all merge into one shot and all the dates are all mixed up! The camera did not come with any software that I can see and have no idea how to get my images to burn. Please HELP!

    Hi ford1003,
    Create PDF cannot be installed as it is a SAAS. However, when i looked in to your account, i see only export PDF.
    It can be used to export PDF to WORD, Excel,PPT.
    Hope it helps.
    THanks,
    Vikrantt Singh

  • HI there, I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep gettin this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.

    I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep getting this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.
    Any help will be highly appreciated.
    Thanks a lot in advance.
    Sincerely,
    Uvaldocj@@
    Here is a list of the products I am troubled with:
      Adobe After Effects CS5 10.0.2 Update
    There was an error downloading this update. Please quit and try again later.
      Adobe Bridge CS5 4.0.5 Update
    There was an error downloading this update. Please quit and try again later.
      Adobe Extension Manager CS5 5.0 Update
    There was an error downloading this update. Please quit and try again later.
      Adobe Illustrator CS5 15.0.2 Update
    There was an error downloading this update. Please quit and try again later.
      Adobe Pixel Bender Toolkit 2.5 Update
    There was an error downloading this update. Please quit and try again later.
      Adobe® InDesign® CS5 7.0.4 update
    There was an error downloading this update. Please quit and try again later.
      Dreamweaver CS5 11.0.4 Updater
    There was an error downloading this update. Please quit and try again later.
      Fireworks CS5 11.0.2 Update
    There was an error downloading this update. Please quit and try again later.
      Photoshop 12.0.4 update for Photoshop CS5
    There was an error downloading this update. Please quit and try again later.
      Photoshop Camera Raw 6.7 Update
    There was an error downloading this update. Please quit and try again later.

    I'm having the same issue. And Dreamweaver now crashes after just a few seconds.

  • I bought an album in the I Store and it shows there as a Purchased item.  However, I cannot find the album in my iTunes and do not know how to redownload it.  What should I do?

    I bought an album in the I Store and it shows there as a Purchased item.  However, I cannot find the album in my iTunes and do not know how to redownload it.  What should I do?

    If you are in a country where music can be redownloaded then it should show in the Purchased link under Quick Links on the right-hand side of the iTunes store homepage - that it where you can redownload items (as long as they remain in the store).

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • We can not remember pass word to ipod and do not know how to get around it

    We forgot the password to Ipod touch and do not know how to reset it?

    Read the manual.
    It says to restore the ipod.

  • HT2731 Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

    Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

    The verification email will have been sent to the email account that you put as the primary email address on the account - log into that email account as you usually do and you should have an email from Apple.

  • I installed Premiere Pro CS6 and do not know where it is located.

    Just like in the topic. I do not know how to run Premiere Pro CS6. Help pls.

    Windows or Mac, part of the Cloud or from the individual purchase link... and other questions
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • I GOT A GIFT FROM I TUNE STORES BUT CAN NOT DOWN LOAD AND INSTAL ON MY I PHONE....I GET THIS MESSAGE ASKING FOR A CODE WHICH I DO NOT HAVE AND DO NOT KNOW HOW TO GET......

    i got a gift for my i phone 4s but i can not download and redeem same as i tune is asking for a code number which i did not get and i do not know how to get..........pl help solve this problem...thanks.

    SW,
    I don't know what the problem is with your corrupt/unopenable document on CD. I wonder if you can display it with QuickLook.
    Select the file in Finder and hit the Spacebar. If the file is displayed properly, you can capture it as an image with Grab.app or by Shift-Command-4, > drag capture box.
    Not knowing the complexity of your document, it's difficult to say what you should do next. I'd submit the graphics to an OCR application and extract the text, to be used in reconstructing the original document.
    Jerry

  • Missing files to open my Photoshop CS5.1. Need to reinstall and do not know how. Help please.

    I cannot open Photoshop CS5.1
    Message says that I need to reinstall but I do not know how. Can someone help me please?

    If you have the discs and serial number that came with CS5, you place the disc in your drive and run the installer program. Enter the serial number if asked.

  • I added an app that said FREE then it is giving to me for 14 days,,,I want to delete it and do not know how..

    I added an app that said FREE then after installing it said I had a 14 day trial..I want to delete this and do not know how

    If you downloaded the app in iTunes on your computer, and synced the iPod touch, you can unselect the app in iTunes, in the iPod's sync settings for Apps, and Sync the iPod again.
    If you downloaded the app directly on the iPod touch, tap and hold on the app's icon (on the iPod's screen).  The icons start to "jiggle."  Click the X next to the app's icon, to remove that app from the iPod.

  • SO HOW I DELTED MY LIBRARY FOR MY MOTION3.2  PROGRAM AND DO NOT KNOW HOW TO GET IT BACK HELPPLEASE!

    I do not know how to restore my library with all the 3d effects, particles etc and need directions on how to do this so that I can create those awesome action art pieces. thank you

    Restore it from your backup.
    If you do not have a backup and you deleted it and emptied the trash, then unfortunately, you are out of luck. Unless you wish to pay for a data recovery software or service (by company techs).

  • Is anybody else getting external MIDI clock tempo issues using Logic Pro 9 and OSX Lion 10.7.5?

    I am having really serious tempo issues when sending midi clock to any external device - The tempo wavers and alternates around 5 bpm above and below the tempo set, and to be frank is totally unuasable when trying to clock arps from hardware synths.
    I have the problem both with Logic and Ableton LE, as well as through both my MOTU Ultralite and Focusrite Liquid Sapphire 56 interfaces. I am therefore presuming this is a MIDI issue with the actual computer (MacBook pro, bought new last september).
    I moved to Mac from PC, so I'm not totally up to scratch with the Mac architecture yet - can anybody shed any light on why this is happening? It's driving me mad!

    Pancenter,
    Yes.. I do see the occasional minor variations much like yourself when I sync up to my Oasys or more usually the Motif... to a fair sized and complicated project,,. Maybe +/- 1.. or on rare occasions +/- 2 bpm... but nothing close to the OP's +/- 5 bpm experiences...
    It actually got better for me when I installed 10.8.x... along with the newest Motu drivers.. and in fact I can't remember the last time I had any unworkable issues with syncing though admittedly I haven't done that much syncing recently.
    I do have a project coming up in the next 10 days..  that will require me to use the Oasys synced to Logic so I'll make a note of any issues i have and post back if any occur.
    As an aside, I have recently been doing a lot of work with iPad Instruments and Arp Apps and Logic... and the sync as been rock solid over USB...

Maybe you are looking for

  • Creation of Business Event Type

    Hi We have already created a Business Event Type called Safety Refresher. Actually this training will happen every month. already created Safety Refresher and again trying to create its showing business event type already exists. Now i want under saf

  • Synchronize iPad to Imac via WIFI

    Hi guys, I know that is possible synchronize iPad/iPhone with Mac via WIFI but I´m not able to do. It say that iPad must be connect to electicity and on the same WIFI of the Mac. After checking this, the button Synchronize on mi iPad is always greyed

  • Getting error 127 8080 apex wwv flow

    hello, I am getting error while loading data using APEX Admin option of load data. It was working fine earlier when i was using Oracle 10g XE. Recently i have updated it by APEX 3.2. After that i am unable to load any file using load option. It si go

  • Autoconfigure does not return UPN

    Hi there I host several organisations on my exchange service.  the default SMTP addresses for these are [email protected] [email protected] [email protected] however the upn is [email protected] autodiscover always returns the primary email address,

  • Curtain image does not appear in Curtain Mode

    Although, ARD 3 has been touted to put up a nice red curtain image in place of a lock whenever Curtain Mode is implemented, for some weird reason, all I keep getting is the lock image. Is it just me, or is everyone experiencing this? Does anyone know