I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

Is your version of Skype known to work with your operating system version?

Similar Messages

  • I bought InDesign (Creative Cloud) on my Mac Book pro and recently bought an iMac. I want to use the software on my iMac now, can't figure out how?

    I bought InDesign (Creative Cloud) on my Mac Book pro and recently bought an iMac. I want to use the software on my iMac now, can't figure out how?

    All you need to do is install Adobe Creative Cloud application using which you can download InDesign cc app .
    https://creative.adobe.com/products/creative-cloud
    Reference :
    https://helpx.adobe.com/creative-cloud/help/install-apps.html

  • I cannot install ODX Yosemite over OSX Mavericks as my Mac Book Pro (early 2011) advises that the disc "Mackintosh HD" is used for Time Machine back ups. This is not the case however as I use a separate external HD for this purpose, help please ?!  T

    I cannot install ODX Yosemite over OSX Mavericks as my Mac Book Pro (early 2011) advises that the disc "Mackintosh HD" is used for Time Machine back ups. This is not the case however as I use a separate external HD for this purpose, help please ?!
    Thanks

    Check this link out...
    OS X: Cannot install on a volume used by Time Machine for backups
    I was apart of this thread and it helped the OP...
    Re: System installer thinks my main drive is my time Machine backup and won't install.
    KOT

  • I have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
    B-rock

  • TS3694 Just took my 1st gen iPod out of it's original box, never used before.  Plugged it into my new Mac book Pro and it recognizes that the iPod is in recovery mode but when I click to restore, error 1611 comes up - but that error code doesn't say what

    I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up.  Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc).  Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10.  But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try.  The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine.  I also tried a different USB port on the Mac Book.  Any ideas?

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

  • I just bought this use mac book pro, and automatically when i try to go on the apple store to upgrade, its an other ID

    its always the apple ID of the owner who had the macbook before. All the info of the owner before has been remove. I check in the preference systeme under user and groupe and theres nothing. i put my apple ID and also my password.....
    help help
    ty

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Suddenly the facbook games page margens have become hidden by the face book section and I cannot see the arrows to control the games,

    It's as if the game page has been maximised behind the facebook face page, this happened suddenly, one day I could see the complet game page with its control icons in the bottom right hand corner, the next they appeared behind the face page, to play them now I have to use the Internet explorer browser

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • What you Mac guru's recommend for cloning a disc? I just bought a Mac Book Pro and I am on the learning curve from Windows. I have always used Acronis as I do an image and if I need to restore, I boot off the bootable cd and restore the image and everythe

    I just purchased a Macbook pro laptop.  I want to be able to backup and restore as I did in windows with Acronis.  In Acronis I take an image of the hard drive, I can then wipe it clean, (format, Dban, etc) and boot off the acronis boot cd, go to my backup and crestore it.  After the restore Windows comes up and everything from my pc before I wiped it is now there again, no reinstalling or configuring anything.  And it takes about 10 mins or less.
    I am looking for a package that will do the same for the MacBook.  Any suggestions please?
    Thank you

    There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
    You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
    If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
    Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

  • Help! I have a Used Mac Book Pro need help with apps update

    My ex bought me a mac book pro and purchased all of the apps and uploaded the apps under is apple id. I just recently update the new software now i can't get access to iPhoto, and other apps because its asking me for my password but his apple id coming up is there any way i re install these apps under my apple id. Please help I can used iPhoto.

    You cannot use or upgrade anything that is registered with his Apple ID. You must re-purchase it all using your Apple ID and your iTunes account. This includes the operating system as well. Essentially, you erase the drive and start from scratch. Here's how to get started:
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer. You can decide which apps you want to purchase (or download free) from the App Store where you will set up your own account and your own Apple ID if you don't have one.

  • Purchased used Mac Book pro

    Just bought a used Mac Book pro and the hard drive has been wiped.  Tried to recover over internet but Apple ID not associated with OS X purchase.  I purchased OS X Mountain Lion and received proof of purchase.  Tried restore again and still fails.  I do not have a computer with OS X installed.  I have an ipad and iPhone.  How do I associate my recent OS X purchase to my Apple ID so I can restore the Mac book pro?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • My hard drive died on Mac Book Pro and I do not have the restore disk?

    My hard drive died on my Mac Book Pro and do not have the resore disk? 

    do you have a backup of your data?  You can get the discs that came with your mac by calling AppleCare and giving them the serial number of your mac.  For a small fee, they will send them to you.

  • DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd.  The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

    IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies.   The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player  The dvd move was made/burned on a PC.   Why will a dvd movie play on my Macbook Pro and not my IMAC?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode.  Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

    I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding."  Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

    Do you have a back up?
    If you're just trying to recover the photos you can do that much more simply:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
    Your photos are inside - these are the originals as imported from your camera.

  • I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    .. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update"  It's a full version "upgrade" that has to be done using the install discs (or disc images).
    -DH

  • Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this

    Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this?

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Maybe you are looking for

  • Different output of same query in SQL Server and Oracle

    I have two tables table1 and table2 --table1 has two columns c1 int and c2 varchar. there are not constraints added in it. it has data as given below c1     c2 6     d 5     j 102     g 4     g 103     f 3     h 501     j 1     g 601     n 2     m --

  • User audit trail in a SOA scenario

    Hi All, In a SOA scenario when using a composite application calling many webservices who on their turn call asynchronous jms calls to backend applications. How can you audit the user trail? So can you tell of all the backend transactions touched by

  • How to access password protected web service endpoint?

    Hello, I annotated an EJB as a web service end point with @WebService and @WebMethod, and put this end point into a security realm from sun-ejb-jar.xml. Then I use wsimport to generate the client source code and compiled them with my program. But whe

  • FTPS certificate hash BT2010

    Hey Folks, I have been trying to get FTPS Adapter to work in BT 2010 for two days and can't seem to crack it.  I keep getting the Windows Event Log Error 'The adapter "FTP" raised an error message. Details "Unable to connect to FTP server "xxx.xxx.xx

  • Back-up Disk's

    I want to back-up my music. the problem is i have 12GB of purchased music and DVD disks only hold 4.7GB. is it still best to back-up onto DVD data Disks or separate CD's?